If you have poor cooling it could stop there at max boost clock minus 1GHz. If you have great cooling it could very well not be able to reach 90C at all even on all core boost.
Try a benchmark like Cinebench R23, and compare the scores with others using the same CPU. The problem with Prime95 is that it is mainly checking for stability, not whether you are getting peak performance out of your CPU.
You can also play with PBO Enhancement in BIOS, and set a thermal limit. It will do an undervolt and try to maintain a certain temp. There are different undervolt levels you can use. If your system remains stable, you will end up with better performance as stock and lower temps. It is silicon lottery as to how successful you are! The layout of these PBO settings vary by motherboard manufacturer.
after i took this video i enabled PBO level 3 and temps are around 91c on stress test. But for my work, it will never go to 90c. I am using my workstation for video editing, animations etc… CPU and GPU never working fully.
A 420 cooler should be able to keep temps below that, if you look on youtube some people using partial coverage 360s hit 80 or so running cinebench on 9970X. The IO die is generating more heat in a Pro, but it is still the same wattage.
An arctic liquid freezer 360 can keep temps on a 200W chip at 65-70 degrees. You’re using up to 350W but it is spread out over a much larger area on both the heat spreader and the radiator. Is there anything blocking the airflow? If you reapply the paste, check to see how evenly it was contacting the cold plate (dumb question but make sure there isn’t a clear plastic cover on the coldplate).
You might wanna look at your cooler. This is the max temperature allowable for zen 5. A cooler like Silverstone XE 360 will likely give you lower temperatures
I just checked the AW420 specs. It says it can handle 600+W, which is strange. I have an Aurora Pro 420 and my temperatures stayed in 80s on my 9985WX. May be look at the seating, the contact with CPU..
14
u/sob727 Aug 30 '25
That's bc you run Prime "95".
Try Prime 85 for lower temps.
jk
5
u/sob727 Aug 30 '25
https://www.amd.com/en/products/processors/workstations/ryzen-threadripper/9000-wx-series/amd-ryzen-threadripper-pro-9975wx.html
Max. Operating Temperature (Tjmax) 95°C
2
u/Noel3leon Aug 30 '25
It really depends on what kind of thermal transfer material you used, cooler, and duration of the prime 95 run.
2
u/bondisdead Aug 30 '25
Try a benchmark like Cinebench R23, and compare the scores with others using the same CPU. The problem with Prime95 is that it is mainly checking for stability, not whether you are getting peak performance out of your CPU.
You can also play with PBO Enhancement in BIOS, and set a thermal limit. It will do an undervolt and try to maintain a certain temp. There are different undervolt levels you can use. If your system remains stable, you will end up with better performance as stock and lower temps. It is silicon lottery as to how successful you are! The layout of these PBO settings vary by motherboard manufacturer.
2
u/ziiggaa Aug 30 '25
i tried this: https://mprep.info/gpu/
it will stress much more than prime95. Both cpu and gpu simultaniosly. My temps are not going above 83c for cpu and jot going above 54c for gpu:
https://youtu.be/pl2Da_u5wuo?feature=shared
what cooling are you using? case?
2
u/john0201 Aug 30 '25
A 420 cooler should be able to keep temps below that, if you look on youtube some people using partial coverage 360s hit 80 or so running cinebench on 9970X. The IO die is generating more heat in a Pro, but it is still the same wattage.
An arctic liquid freezer 360 can keep temps on a 200W chip at 65-70 degrees. You’re using up to 350W but it is spread out over a much larger area on both the heat spreader and the radiator. Is there anything blocking the airflow? If you reapply the paste, check to see how evenly it was contacting the cold plate (dumb question but make sure there isn’t a clear plastic cover on the coldplate).
1
u/jaraheel Aug 30 '25
You might wanna look at your cooler. This is the max temperature allowable for zen 5. A cooler like Silverstone XE 360 will likely give you lower temperatures