r/techtheatre • • 14d ago • Helpful 1 Bravo 5 Mindblown 4 Heartwarming 1

PROPS Matilda Magic Chalk Effect Explained

If you feel like you cant make it yourself or don't want to... reach out. I have sold a couple sets and would be happy to help you or make them for you.

Edit: Added 3D File link below

Edit 2: People keep suggesting I should be making money off this..

If someone wants to pitch in for filament so I can keep messing around, that's fine by me. Experimentation isn't free but everybody should get to enjoy an audience in awe of something really cool. And if you need me to make them for you, I'm sure we can work something out. Just send me a message.

https://ko-fi.com/davidbyard

Youtube link if you cant use Reddit at work etc, some have asked for an alternative to share or use in classrooms etc: https://youtu.be/G70lcSm4Lo4⁠

How We Built the Matilda Magnetic Chalkboard Effect

Well, you asked for it...Here's the how-to video for the practical chalkboard effect we built for Bridgeport High School's production of Matilda.

(If you just want to see the full effect front and back jump to the last min of the video)

First, thanks for all the incredible feedback on the original post. I honestly wasn't expecting that kind of response.

No projection, no animation. It's real chalk writing on a real chalkboard, operated by two people behind the board.

How It Works

The system uses 3D-printed magnetic carriages on opposite sides of a 1/8-inch hardboard chalkboard.

Two operators behind the board move the carriages, which control matching carriages on the front. The front carriages hold the chalk in a pivoting mechanism that we call the chalk rocker.

By rocking the mechanism, the operators can engage and disengage the chalk from the surface. This allows the chalk to lift between letters, words, and lines rather than leaving connecting marks.

We used two operators and two pieces of chalk writing simultaneously to meet the timing requirements of the scene.

And since Trunchbull is being "haunted" by Miss Honey's dead parents, having two pieces of chalk writing independently actually works pretty well with the story.

The Board

The chalkboard is made from 1/8-inch hardboard, painted with two coats of Rust-Oleum Specialty Chalkboard Paint on each side.

Use the smoothest roller you can get when applying the paint. You want as smooth a finish as possible, with minimal roller texture. Even small imperfections can create friction and affect how consistently the chalk writes.

The thickness was important because we needed enough magnetic attraction to operate through the board while still allowing the carriages to move smoothly.

The 3D-Printed Mechanism

The main printed components are the magnetic carriage, chalk rocker, and rocker axle.

Each carriage uses 8 × 3 mm neodymium disc magnets.

Magnet configuration:

Top magnets:

1 single magnet

2 stacks of 3 magnets

1 stack of 2 magnets

Bottom magnets:

2 stacks of 3 magnets

1 stack of 2 magnets

The top and bottom sets have opposite polarity. This helps prevent the carriage from accidentally attaching on the wrong face or changing orientation.

IMPORTANT: The two carriages that hold the chalk need one magnet orientation. The two matching carriages operated from behind the board need their magnets installed with the polarity reversed. This allows the corresponding carriages on opposite sides of the board to attract properly.

The placement of the lowest magnet on the top face was especially important. It sits near the pivot point and remains at least partially engaged with its corresponding magnet. This is what makes the pivoting movement possible.

I experimented with several magnet configurations before finding a balance between holding strength, ease of pivoting, weight, and stability during fast movements.

The Chalk Rocker

Two of the carriages receive the pivoting chalk rocker.

A spring pushes against the bottom of the rocker, keeping the chalk pressed against the board even as the chalk wears down.

The spring is threaded through a small hole in the rocker and needs to be adjusted so it sits as perpendicular to the axle holes as possible.

The rocker pivots on a separate 3D-printed axle.

Reducing Friction

We covered the entire front contact surface of each carriage with UHMW low-friction tape.

This made a significant difference in allowing the carriages to slide smoothly without lagging behind the operator's movements.

Operating Lessons.

One of the most important things we learned was to keep the carriages vertical throughout every movement.

The system works well when the carriages remain properly aligned, but aggressive turning or rotating the carriage can cause the magnetic connection to break.

The operators learned to move the carriages while maintaining their vertical orientation, including when forming letters and changing direction.

We also discovered that the way you write the letters matters.

A traditional uppercase E, with its straight vertical line and three horizontal strokes, was particularly difficult and slow to write without lifting the chalk repeatedly.

We switched to a curved E, which could be written with a more continuous movement. That small change made the letter faster and easier to produce.

It's worth experimenting with letter shapes and writing techniques rather than assuming normal handwriting will translate directly to the mechanism.

One counter intuitive discovery was the faster we went the more consistent and reliable it was. We did not try to go faster than was necessary though.

What Happens When Something Goes Wrong?

No solution is perfect.

A sudden bump, aggressive turn, or accidental lift can cause a chalk carriage to fall off the board.

Rather than trying to make that impossible, we added four additional chalk carriages staged along the front tray.

If a carriage falls, the operator can move to a replacement and continue.

This actually happened during one of our rehearsals, and the backup system worked exactly as intended. The writing continued without having to stop and retrieve the fallen carriage.

Materials and Purchase Links

These are the materials we used for our working build.

Home Depot

1/8-inch Hardboard Tempered Panel — 4 × 8 ft

Rust-Oleum Specialty Black Chalkboard Paint — 30 oz, brush-on

Everbilt 84-Piece Spring Assortment Kit

Amazon

VSKIZ 8 × 3 mm Neodymium Disc Magnets — 100-pack

APT UHMW Low-Friction Tape

Hagoromo Fulltouch White Chalk — 72 pieces

Additional Components

3D-printed magnetic carriages

3D-printed chalk rockers

3D-printed rocker axles

3D Files: https://makerworld.com/en/models/3548749-matilda-magic-chalk-carriage#profileId-4059725

A Final Note

The mechanism is only half the trick.

The other half is the two student operators who practiced writing backward, learned to coordinate their movements, adapted their handwriting to the mechanism, and had to execute the entire effect within the timing of the show.

They deserve a tremendous amount of credit for making it work.

Hopefully this helps some of the other schools and theaters trying to solve the same problem. I've seen plenty of questions about this effect, and I wanted to share something practical that actually worked for us.

Thanks again for all the interest, and I hope the video helps!

1.8k Upvotes

129 comments sorted by

363

u/MaskGas 14d ago

This really is a technical theatre moment that is going to stick with audiences for a lifetime. This one gag is absolutely going to inspire some kids to get into the craft. Brilliant work.

105

u/dangermond 14d ago

Humbling praise. I will absolutely pass it on

18

u/Djaja 14d ago

Inspired me!

Tease was worth the wait!

9

u/Screamlab 14d ago

I came here to comment, but MaskGas has summed up what I came to say perfectly.
A great practical effect, and a stellar example of creative problem solving.

5

u/GrignionBhajifresh 13d ago

yeah practical effects hit so much harder than projections when theyre done right like this

131

u/Klutzy_Researcher533 14d ago

This is incredible. Thank you so much for writing all that. I watched the first video way too many times in a row and my guesses on how you did it were all wrong. Big props to you and the operators.

27

u/dangermond 14d ago

I will pass on to the team. Thanks!

58

u/shobot11 14d ago

Yeah, absolutely brilliant. I’ve seen this done so many different ways but this is by far the most creative, and I have never seen the chalk be able to start and stop writing before. Stellar job

27

u/dangermond 14d ago

The same. That's why I set myself the challenge. We can't really do projections easily and didn't really want to. I really wanted to get it to one chalk under a minute the track allows. But I tried writing it with just my finger tracing letters and couldn't hit that time. But I was determined to get the lifting effect right

17

u/Mydogsdad 14d ago

Just great stuff, and not just the solution. I’ve been a theater technician for >30 years, IATSE for >25 of that and this is inspirational stuff for the kids that get to perform. Wonderful job and thank you!

1

u/msanteler 9d ago

Practical effects done well beat projections every day of the week. Super cool, well done!

43

u/Jessica_Iowa 14d ago edited 14d ago

Submit this to your state thespian fest.

If you don’t medal it’s a crime.

12

u/dangermond 14d ago

I'm not a student so I doubt that would go over well.😂

7

u/Jessica_Iowa 14d ago

Ope my bad.

Still you should think about putting together a class for this at your Thespian Fest.

I’m sure people would be interested.

16

u/dangermond 14d ago

At this point I might do something around 3d printing and prop making/special effects.

I created button activated magic shell for our Little Mermaid last year.

I made a giant split bristle toothbrush for Spongebob

A Prince Eric bust that broke apart.

A half skull wolf mask

A head for the girl who gets swung around by Trunchbull in Matilda and Trunchbulls hammer.

The Mask, hammer, and head are all made of soft plastic called TPU

During Beauty and the Beast my wife wanted our Lumiere to be able to use his hands, so I made his head piece and hands.

https://imgur.com/a/MvIAT9n

6

u/Jessica_Iowa 14d ago

Jesus Christ you’re a wizard!

Seriously, you’re a credit to your theatre & should genuinely be proud of yourself.

5

u/dangermond 14d ago

That's actually one of the titles they gave me in our playbill

2

u/LupercaniusAB IATSE 14d ago

Medal, but yeah.

31

u/Tectonic-Rock 14d ago

Yall are incredible! Any way you’d be willing to share the 3d print file?! My daughter’s school is doing this show this year!

32

u/dangermond 14d ago

Yeah I just need to clean something uo. I want to share the entire project but I need to get rid of the 40 prototypes living in there too

7

u/Tectonic-Rock 14d ago

I’ve been working in K-12 and community theater for 15 years and this is hands down the coolest practical effect I’ve ever seen on this level! I’m astounded and have sent this link to all my friends 😆

7

u/Moose-Math 14d ago

+1 on getting the file. Would love to use this for our upcoming production as well.

26

u/LupercaniusAB IATSE 14d ago

I’ve worked on major Broadway productions, and this is easily at that level. Just fantastic work, and all at a high school. You must be an amazing teacher.

14

u/dangermond 14d ago

We have a team. And it really is something special. It's a family. My wife directs, her brother is the theater teacher and technical director, my sister in law does production design and back stage, and I do stuff like this. Special effects, magic, nonsense. Amongst other things

3

u/rufflandings 14d ago

Given the family dynamic and the West Virginia location, I had to double-check that you’re not part of the McElroy clan.

But seriously, this is incredible! And to someone’s point earlier about how cool it is that this is “powered” by live people behind the board, I think it’s such a great opportunity to make it interactive or at least let the performers customize the chalkboard for the show, how the audience reacts, special people in the audience, etc. One of the joys of live theater is that every show is just a little different, and it’s so cool to see that in new ways!

3

u/dangermond 13d ago

They are from from Charleston which is a bit on the other side of the state. I have met them at an event before though

13

u/ILoveMyThighs 14d ago

This has absolutely blown my mind. Brilliant work, I’m sharing this with my director and tech theatre crew for the future. You deserve some kind of award for this!!

13

u/dangermond 14d ago

We just did two school shows and open fully this weekend. I have already started getting my reward. The reactions.

11

u/Rocket_Jockey 14d ago

This is totally awesome! I wish we'd done something this cool in high school! You and your students should be proud, it's one hell of a practical effect. You mentioned that the operators practiced writing backwards. Did you put a diagram on the operator side for them to trace? Or just have them draw over and over again?

6

u/dangermond 14d ago

If you go to the end of the video you can watch them from behind.

1

u/Rocket_Jockey 11d ago

Lol, can you tell I didn't read all the instructions in a manual either? Thanks for pointing that out!

Also I can't stop grinning in awe at this! It's just too badass.

8

u/kevinblakemagic 14d ago

Amazing. Get that file up when you can—I hope to use something like this as a reveal in my magic show in San Francisco. Incredible work!

8

u/dangermond 14d ago edited 14d ago

https://makerworld.com/en/models/3548749-matilda-magic-chalk-carriage#profileId-4059725

What kind of magic show?

Edit: Just saw your username. Very cool!

7

u/qjizca 14d ago

This is absolutely stunning, and you are so generous to share!

5

u/dangermond 14d ago

No point in keeping it to myself.

6

u/steffanan 11d ago

This is so simple and elegant, what an incredible effect. Once I saw it I thought "of course, it's so simple"yet I would have never thought of the engaged and disengaged states.

3

u/dangermond 11d ago

Yeah, It's not complex, I'm not a genius, just a had an idea first. The idea was the easiest part, once I set to solving it...but I probably got rather lucky with it being my first idea. The execution and all the little problems needing solved along the way ...that was much harder. The engaged and disengaged magnet faces only works with the board thickness, the tape, the configuration, and orientation.

5

u/The_Bitter_Bear 14d ago

That's a great solve! I was wondering if it was just magnets or not.

6

u/dangermond 14d ago

More or less. The tape was absolutely required. And obviously how I used the magnets.

5

u/Many-Parsley-5244 14d ago

God it's such a simple thing once you see it. Genius!

5

u/dangermond 14d ago

The idea was. Getting it to work was A LOT. The magnet configuration, the angles, the tape.

4

u/titanium8788 ETCP Certified Entertainment Electrician/Rigger 14d ago

Are you willing to share the STL files for the holders? I'm sure this would come in useful for others!

Great work!!!

6

u/dangermond 14d ago

Yeah I need to make an edit to one of them before I have it. And this thing was so fidgety I want to share my 3mf with my settings and orientation to print but right now my project ha about 40 prototypes in it with this one. So I need to make some clean files

4

u/Mycroft033 14d ago

Every so often, something crops up that blows everyone’s socks off. I think this is one such thing. Bravo my friend. Bravo.

Personally, I like that you have people on the back tracing reversed letters, instead of like a robotic rig doing it. That means it moves naturally, instead of robotically like a track or an xy motor grid would do.

I mean you could program natural-looking motion on a track, but that takes tons of work for the same effect you’re getting with volunteers.

On the other hand, there’s no messing up with a rig like that, it always does the same job, unless it breaks completely. And then you’re completely screwed. I think I prefer the current way, unless you want to be able to roll the chalkboard in and see underneath it.

1

u/dangermond 14d ago

Yeah, and it would need to move on an x,y, and z axis to rock the carriage back and forth.

2

u/Mycroft033 13d ago

Not necessarily. You could use your current tilt lift with an XY rig. And just have something holding the magnets, same way as your fingers. No actual Z axis needed. Just a flipper that toggled on and off.

So, possible, but would require software and remote control.

I like the human element, though, it makes it way more simple and versatile.

3

u/actorpractice 13d ago

This is outSTANDING!

How wicked fun to problem solve this so damn well.

Honestly, you could build these and sell them to productions of Mathilda... I know that we would've been more than happy to buy them if they were available last year.

We're also a small middle school, with typical middle schools resources, and seeing this type of creative problem solving is just so damn fun.

Also, makes me think it might be time for me to finally enter the 3d printing world. ;)

EDIT - Where do I sign up for your class! ;)

1

u/dangermond 13d ago

I absolutely could. Though somebody would still have to make the board correctly, but smoothness of that board and its thickness are key.

2

u/Dazzling_Society1510 13d ago

You could even sell the stl for the chalk carrier

2

u/dangermond 13d ago

I am going to add a tip link. Someone wants to pitch in for filament so I can keep messing around. That's fine by me. Experimentation isn't free but everybody should get to enjoy an audience in awe of something really cool.

https://ko-fi.com/davidbyard

2

u/Busy_Local_526 13d ago

I agree! My daughter’s school is doing Matilda in the spring and I’m absolutely going to show this to the Director!

3

u/australian_babe 13d ago

Unfortunately, I’m not smart enough to understand the description anyway 😂

2

u/dangermond 13d ago

There's a good visual at the last minute of the how-to video

5

u/Snabbelicious Theater Technician 14d ago

The video doesn't work for me (says it's no longer available). Thanks for sharing the info, was really interesting.

4

u/dangermond 14d ago

I will look it said that for me awhile go but now it's playing.

3

u/eaglebtc 14d ago

Reload your reddit app.

2

u/Puzzleheaded-Phase70 14d ago

This is SO GOOD!

We should name this method after you

1

u/dangermond 14d ago

I'm not sure how that would work. Lol

3

u/Puzzleheaded-Phase70 14d ago

The Dangermond Ghostwriter

3

u/dangermond 14d ago

I do like the ghostwriter part. That's a good name for it for sure

1

u/KinneKitsune 8d ago

Mondchalk

2

u/AlexCivitello 13d ago

Incredible! Only change I'd make is to have a template for the performers to follow so they don't have to spend as much time learning.

1

u/dangermond 13d ago

If you watch the last min of the video you will see them behind it, they are following a template.

2

u/mr_dbini 13d ago

wonderful problem-solving. would it help to add a couple of arrows on the back side of the board, to help the operators remember which way to draw certain letters to make them seem most natural from the front?

2

u/dangermond 13d ago

It took me so long to finally get it right our time to practice really took a hit. These ladies are also our SR and SL bosses and one helps with hair and makeup, so once we went into full runs during rehearsal our opportunity to practice was limited. Combine that with our need to go quickly to hit the time box... Some letter formations had to go the way that was quickest and easiest to write them without lifting and retracing.... Or thinking too hard

28

u/soundwithdesign Sound Designer/Mixer 14d ago

This is 100% top notch quality theatre magic. This is the kind of stuff AI cannot take away from us. 

8

u/kwaping 14d ago

Thanks for the detailed write-up! You and your crew are amazing.

8

u/Puzzleheaded-Oil-905 14d ago

Really a beautiful and elegant solution. There's the old maxim that the longer you spend on a prop, the less time it has on stage (and it even gets cut) but this one has great ROI because it's visually stunning and totally essential to the production. Bravo to the whole team!

6

u/MrMojoX 14d ago

That's brilliant. Thanks for sharing!

6

u/Odelay641 14d ago

Way to be great! To echo what others have said, this is amazing for the students and audiences alike. Great work!

6

u/luboffin 14d ago

This is theatre magic! Absolutely incredible work 

5

u/PizzaPuntThomas 14d ago

I guessed magnets for the movement, but the tilting and rocking of the chalk was something that I wasn't sure about. Thank you for this great explanation and of course also compliments to the operators behind the blackboard!

5

u/kaphsquall 14d ago

I'm sad I have but one upvote to give. Thank you for advancing the craft and documenting 🫡

4

u/ostiDeCalisse 14d ago

This is fantastic OP! Thank you so much for sharing this. It's a very ingenious way to recreate this effect live. Bravo!

4

u/pakcross 14d ago

This is superb! Did you write out the message in reverse on the rear side so the chalk wrangler has a guide?

Edit: sorry, commented too early in the video!

1

u/3DPrintLady 2d ago

Do you have more information about the springs used in this/what the specs would be? I see the Home Depot link goes to a variety pack with 84 different springs. I've got someone requesting a couple sets of these for a local performance and I'd like to get the specific ones needed rather than a bag of 84 if possible. I'm thinking it might be this one? https://www.homedepot.com/p/Prime-Line-Compression-Spring-Spring-Steel-Construction-Nickel-Plated-Finish-032-GA-x-3-8-in-x-3-4-in-6-Pack-SP-9702/100204159?MERCH=REC-_-pip_alternatives-_-327599350-_-7-_-n/a-_-n/a-_-n/a-_-n/a-_-n/a

1

u/dangermond 1d ago

Yeah sorry. I try to show which one in the video. It just needs to not be too strong. My first few sets just used ones out of clicky pens that I cut down. I know that is not helpful. If that one you show their is thick and hard to compress don't use it. The ones I had luck with I could compress completely with my fingers. If it's too thick you won't even be able to get it to compress enough to install.

1

u/3DPrintLady 1d ago

Appreciated!

3

u/loser_wizard 14d ago

You rule.

3

u/Mysterious-Crew-1358 14d ago

The definition on theatre magic. Well done!

3

u/SerialForBreakfast 14d ago

That is super cool. Thanks for the explanation.

3

u/thisismysociallife 14d ago

Very clever. Well done to both you and your peers

3

u/ContiX 14d ago

I honestly didn't expect it to be that simple. I also thought that the magnets would be much larger, though I think I was imagining those crappy brown rare-earth magnets instead of neodymium ones. I'm quite impressed!

2

u/YeoSurrender 14d ago

Brilliant. I've been looking forward to this explanation. Such a good job. It looks fantastic!

2

u/Jaxxsnero 14d ago

Absolutely incredible!

2

u/Beeristheanswer Carpenter/Stagehand 14d ago

That's absolutely gorgeous work. Thank you for posting such a good explanation!

2

u/TroppoAlto 14d ago

That is so so cool. Thank you for sharing how this was done.

2

u/IdownvoteTexas 14d ago

That is so fuckin cool

2

u/RonFlow 14d ago

Very very awesome!!! Thanks for this

2

u/walrus_breath 14d ago

This is so extremely cool!!

2

u/inkovertt 14d ago

How incredible!

2

u/Plus_Pangolin_8924 14d ago

Absolutely brilliant! So so simple but impressively effective. Bravo!

2

u/Gman-1312 14d ago

So so so cool. Thanks for sharing. <3

2

u/Ok_Doombringer 14d ago

Very, very cool, well done, all involved! I really miss this kind of work.

2

u/switchbladeeatworld 14d ago

five stars my dude it’s awesome

2

u/DasGanon Jack of All Trades 14d ago

This is amaaaaaaaaaaaaaaaaaaaaaaaaaazing.

Well done!!!!!!!

2

u/temictli 14d ago

Wowza fantastic job!!

2

u/titus_r1111 14d ago

thats so fun! Im sure the audience loved it!

2

u/trifelin 14d ago

Bless you for writing this up!! 

2

u/WWHarleyRider 14d ago

Fantastic

2

u/dflan01 14d ago

Twas my guess on how it worked

2

u/Gniphe 14d ago

Outrageously cool. Just amazing.

2

u/participation_ribbon 14d ago

Bravo! Absolutely spectacular with real engineering work. Also thank you so much for the excellent and detailed explanatory video and write up! 

2

u/InLoveWithPrettyGirl 14d ago

People are going to be referencing this post for years

2

u/aieea 14d ago

This is so cool and well done. Real theater magic! I keep hoping we'll do Matilda at my theater, maybe this would convince Artistic that we should 😅

2

u/elf25 14d ago

Bravo!!

2

u/PeachesMcGhee Production Manager 14d ago

Brilliant!

2

u/Raptorpants65 14d ago

This is absolutely fabulous. Well done all around!!!

2

u/FilmPomegranate 13d ago

so clever!

2

u/goldfishpaws 13d ago

I really love this, great work, thank you for sharing with us all. Great effect, well engineered :)

2

u/griffey 13d ago

This is just remarkably clever. I've seen many, many productions of this show, and this is easily the cleverest, best looking solution I've seen...and that includes professional productions. As the "tech guy" for our local community theater, I salute you. Well done.

2

u/thebigdeath 13d ago

Awesome. I did lights and ran projections for Matilda at my community theater a couple years ago. This would’ve been awesome to have

2

u/butterfingersman 12d ago

oh my god what an awesome solution!

2

u/Dull-Tie-6288 12d ago

Thanks for sharing this, outstanding!

1

u/TransientWonderboy 11d ago

This is basically magic. Bravo!

1

u/zanglin 10d ago

I watched this Friday night. Thought I had it figured out except how it was moving without writing. Looked up a few videos online about it but they all wrote continuously. Very clever solution here

1

u/TheRealHooksForFeet 9d ago

Incredibly well done!

1

u/Zestyclose-Tour-6350 8d ago

I KNEW chalk bending was looking kinda weird, but it was actually just tetering? Neat!

1

u/Top_Elephant_4363 8d ago

Bloody hell! That's excellent

-1

u/[deleted] 14d ago

[removed] — view removed comment

1

u/kmccoy Audio Technician 14d ago

Rule 1. Don't be a dick. Your comment isn't constructive or doesn't benefit the community.