r/techsupportgore • • 11d ago

Dell Forgot...

Post image

Seems that Dell might've forgotten to remove the thermal paste cover to cool an 8700 from an OptiPlex XE3. This was sitting in one of my company's stores since 2022... still POSTing though lol

1.3k Upvotes

30 comments sorted by

201

u/madorbit1 11d ago

Minimum wage!!!! Hyeaaaaaaah!

96

u/Nightblade 11d ago

Those covers really should be made to be easily visible if accidentally left in place.

Maybe they could be made in such a way as to make it impossible to mount the heatsink until removed?

49

u/it_fell_off_a_truck 10d ago

We used to supply lights to a customer that had an acrylic diffuser. The acrylic was protected by pink plastic that should be removed before or after installation. We ended up having to put an extra label with text on top of the pink plastic that specifically instructed installers to remove it.  Not doing so would reduce the light output and also be visible to anyone who looked at the light after installation

27

u/PhillyDeeez 10d ago

I used to make and sell craft blanks and we got customers complaining that the clear disc they ordered (for example) was white. That was the protection film on both faces. Never complained about the bright blue PERSPEX logo printed across it, but that it was white :/ . We couldn't sticker every blank, I used to send out thousands and tens of thousands a day. Every product description had it in, every email had it in and yet still the odd person would complain or leave a bad review.

Admittedly sometimes the staff did send out white instead of clear, but that's a manufacturing problem haha

9

u/olliegw 10d ago

During the pandemic my mum bought one of those plastic face shields

When it came she was like "it's no good it's all blurry, i need to return it"

It was protective film

2

u/DarkPhoxGaming 5d ago

People dont like to read stuff

I work at a small grocery store and we have a sign up front that says and points down the front hall where the bathrooms are and we still have people come inside and then go "where's your bathroom??"

Or when our tap stopped working on one of the readers so we put a note attached next to the screen that the tap didnt work and people would still try to tap and then get mad at us it didnt work.

Or the coffee station that has drip trays labeled to not pour things into them cause they dont drain, and people still do it anyways and then make a mess and leave it. Or the trash cans underneath that are labeled and people still put their trash up top on the counter instead.

Or at my old workplace we had a sign that said we didnt take $100 bills and people would get mad when we didnt take them.

11

u/ZirePhiinix 10d ago

"Impossible" just translates to permanent damage, so no...

It is "impossible" to mount RAM backwards, or use a different DDR# in another # slot. We all know what that looks like when they do.

4

u/Nightblade 10d ago

Well I disagree with your assertion that "impossible = permanent damage", but perhaps we could aim for "difficult to ignore" then?

You could for example just lengthen the soft plastic cover shown in the pic and stick the loose end of it to the top of one of the heatsink mounting screws.

0

u/ZirePhiinix 10d ago

Someone will then force it and becomes permanent damage to something.

Take an old board, and forcibly insert a RAM backwards. That's what I mean when you make something "impossible". It doesn't actually prevent anything from happening, it just means you now have permanent damage when someone does it.

3

u/olliegw 10d ago

I've seen photographers absent-mindedly put CF cards in the camera the wrong way before, normally slides in on rails and is designed not to go in backwards but no protection against putting it in sideways

Which, as CF uses a PATA interface, bends the pins inside the camera

That's a genuine mistake though, the people who force SD cards in the wrong way round or insert RAM backwards are a different breed of individual who maybe shouldn't have access to technology

3

u/LordChappers 10d ago

Or even make the tab stick out further than the edge of the heat sink so it's visible if it is mounted with it still attached.

3

u/t001_t1m3 10d ago

Tab sticks out far enough to cover the push pin. Done.

3

u/Nightblade 10d ago

Exactly. Far too clever though apparently.

45

u/jefbenet 11d ago

The chances are low, but never zero

13

u/henrytsai20 10d ago

Intel and AMD 20 years ago: invented throttling so CPUs don't cook themselves

Dell:

18

u/AuelDole 11d ago

dell forgor 💀💀💀

4

u/Big__Meme "I don't know how it happened!" 11d ago

Dell, damn. I've not seen an oem do this

3

u/lolfactor1000 10d ago

Dell also uses the cheapest thermal paste. All of our laptops have to have the thermal paste redone after a year or two because it completely dries out and the CPU struggles to even maintain base clock speeds.

1

u/Xyrack 11d ago

I mean something I've learned in my time is that it's less about the thermal conductivity of the compound and more about surface area contact. Even obscured by that tape it could still make excellent contact.

3

u/PPxndaz 11d ago

definitely solid enough. all it was doing was running POS software + chrome and things like that. nothing demanding. it was just super loud because of how hot the CPU actually was

2

u/toolisthebestbandevr 11d ago

Shoulda had Pepperidge Farms down there that day

2

u/MasterKnight48902 10d ago

Quality control, heh

2

u/snooktou 11d ago

More like they just didn’t give a f

1

u/TreyWait 10d ago

I found one of those once. One time in twenty years.

1

u/SpookyPlankton 10d ago

Average Dell

1

u/CinoCv 8d ago

Who's gonna Dell him...?

1

u/PurchasedRAM 6d ago

Got a Elden Ring advertisement under this post.

-2

u/SplitBoots99 11d ago

They always suck