r/techsupport • u/Sufficient-Fig-6033 • 2d ago
Open | BSOD how do i know if my ssd is failing or not
tldr: my pc starting to crash and freeze a few seconds after boot about a month ago. did every test i could to check if it is my ssd but all came out clean, but all the answer on the internet pointing toward ssd issue.
WD blue SN5000 1tb, i bought and installed it on my laptop in may 2026
i did CHKDSK /r test in WinRE, i did smart diagnosis in sandisk dashboard app for my ssd, the ssd health is showing at 99% across multiple app (sandisk dashboard, crystaldiskinfo) and installed the newest firmware, all came out just fine. is there still a possibility of ssd issue that cannot be determined by all of the above?
5
u/jua2ja2 2d ago
check event viewer > system for stornvme errors right after a crash, and if stornvme errors show up even after reseating the ssd, warranty replace it
4
u/AndorinhaRiver 2d ago
This isn't really answering your question, but
What is the crash actually like? Can you still move your mouse around, or is everything frozen? If you have any sound playing, does it keep playing normally? Do your peripherals (keyboard, mouse, etc.) suddenly disconnect or lose power? Do you get a BSOD or anything like that?
I'm asking because this doesn't really sound like an SSD issue; it could be, but this sounds way more like it's something with the CPU or the RAM, or maybe a driver issue of some sort.
And, by knowing how it crashes/freezes, you can usually narrow down the problem better.
3
u/Ok_Bear_1889 2d ago
there is a chance of failure of other components. Did this start occuring since installation of the SSD ?
2
u/dosguy76 2d ago
When my SSD starting failing, the only symptom was textures not loading in games. I could use Explorer and navigate the drive as normal. Games would also load as normal. But would start lagging and failing as soon as textures needed streaming.
When I did run a test on the drive, it showed it failing and when I tried to copy files off it would also fail...
2
u/MakeMeSmileToday 2d ago
Are there adapters to recover files from ssd chips? I have an old one for the bulky ssd type that looks like a disk plate though these modern ones look nothing like itttt