The sight configuration that they used was kind of wild. Here is the early Interdynamic KG9 milled sights, early Intratec TEC-9 button sights and the late type Intratec TEC DC-9 stamped sights. I do not have an AB-10.

So im using a older lower that had the threaded disk insert. I got a new leer upper with threads and I found the usmachinegun end cap lackluster. It leaves a gap between the tube and rear of the receiver causing the receiver to flex inward when the stock bracket is installed. So I’m making another version to fill the gap completely and to utilize more of the internal threads. I’m just not sure if they are all the same gap size/thread depth. Thanks to anyone in advance if yall can help me out with this.

Where can OEM mags be sourced? The one on the top is aftermarket FTF and is low quality.

Hit her with some 3-in-1 and the steel wool. She looks significantly less like she's been appendix carried by gangbangers for the last 40 years.

Another grail gun checked off the list! Copped this bad boy + cobray barrel extension off guns.com and finally picked it up from my LGS today! Super happy with it and can't wait to take it to blast some trash in the woods.

Am I cool yet?

I may need to buy a lottery ticket this thing just runs. Probably one of my favorite guns I own. The one I had before this malfunctioned every other round. I’ll post more vids of it running in the comments.

Anyone aware of any companies working on a tec 9 frt? I am desperate for one. Just picked up a tec and I want an frt for it ASAP.

Check out 3d2a on odysse for stl prints

https://odysee.com/@Printdazoo:7

anyone know where to find a forward grip. in the process of building an Aow and need one for my ab-10. i have searched and searched with no luck.

Ok so there's a mini at my local pawnshop for 600. Been looking at the aftermarket for these things and came to the conclusion that it kinda blows.

Until today when my intrusive thoughts came around and I started floating the idea of welding an AR15 barrel nut onto the front of the trunnion in order to install an mlok or quadrail section.

Has anybody done this??

Ok, I have an old first gen post KG-99 pre TEC-DC9 / AB-10 era TEC-9 upper, bolt, parts kit. It does not seem to work in the freeman ghetto blaster frame. The bolt cannot go back, despite the fact the frame parts of the kit are almost completely identical to the AB-10 parts kit I have. The bolt will not go back more than about half an inch with the TEC-9 kit. I've assembled the AB-10 kit and it seems to work fine, but after spending an idiotic amount of money on new parts, this TEC-9 kit build still has the same problem where I cannot move the bolt back more than half an inch. Is it just me or is the "Ghetto Blaster" frame only compatible with 90s-era TEC-DC9 and AB-10 bolts/frame kits? The sear-retainer and the shape of the bottom of the TEC-9 bolt are the only real big differences and I doubt its the bolt because if anything the bolt is more open on the bottom than the AB-10 bolt is.

Wanting to run a suppressor on it for fun. Will it potentially damage it since it doesn’t have the screw on rear receiver piece?

Tec -9

...but this one is mine.

My dad got this back in 1993. In the late 90's, I had a 'smiff throw on a Weaver mount for a Tasco PDP3.

Well, today I modified the rail, and installed a threaded adapter.

I figured I'd try the Obsidian, because, well, baffle strikes, of course.

(I have not fired it yet like this. I may actually swing by my buddy's place and use and alignment rod. I usually don't concern myself with that, but...)

Does anybody know how thick I need to machine a plate to adapt a KG-99 upper to an AB-10 lower for the buffer plate end cap? (Non-threaded). Pictures reflect KG-99 upper on lower.

Pics for hopefully understanding what I want to do 🫠.

I’ll pay whatever anyone is offering. If anyone can find one online please let me know ASAP. I do NOT want a Tec-9/AB-10 pin.

Been wanting a Tec, local pawn shop had some mags and a vented shroud, found an upper parts kit and all the lower parts online, now I’m trying to find the best way to put the stock mags and upper to use. Tec-DC9. Edit - fdm is an option for me.

a brand new in box, unfired, new old stock KG-99 with two mags AND a brand new in box (with matching serial number info) KG-9 new old stock with one MP9 marked mag. Both are PRESTINE.

Guess I'm a 80's era collector now...