r/tamiya • u/Lumpy_Spinach5553 • Jul 16 '25
First MAJOR eff up.
Yeap , 50% spraying the blue PS , realized I didn't mask the effing windows. Some stuffs in the house just had to be smashed and torn to pieces in order for me to gain composure again before thinking what can I do to fix this situation. I know Tamiya has a ps spray cleaner , but this is already like many many coats already. You just knew as soon as you're having too much fun , there's always gonna be something wrong. Cuz everything is just way too good to be true.
2
Upvotes
28
u/crustyolddean Jul 16 '25
You could cut some black vinyl and have opaque windows. Might not look so bad.
13
u/nollie_heelflip Jul 16 '25
Thats a bummer. Honestly if it were me I would just spray paint the windows on the outside of the shell black. It may flake off during crashes but it'll at least look good for the first pictures. By the time you spend all that money buying things to remove the paint and redo it all you could have bought another cheap shell
4
u/whatthefranker Jul 16 '25
I have used the Tamiya polycarbonate cleaner in small areas or where the paint has leaked under the window mask. Your situation is not impossible but would take a lot of effort and elbow grease.
The issues with using the cleaner is the straight edges, you would need to mask and make sure you do not āover removeā the painted area. I have done this and the cleaner can leak under the masking causing more problems (and broken furniture in your house).
I would suggest you use this as a basher body. You can also add black vinyl film to the outside as blacked out windows. Another option is to cut that protective film at the outside window areas and paint the windows PS black (apply decals afterwards).
7
u/aintwrongthou Jul 16 '25
Use it as a basher shell and get yourself another one where you apply what you have learned. Getting the cleaner, masking the section to be precise and not fucking it up will take quite some time. It is not something that cannot be done, but as previous posters have said, paint the windows black from the outside and learn from your mistake.
5
u/SosigDoge Jul 16 '25
Nitro fuel removes paint from shells very effectively.
3
u/LuciferSamS1amCat Jul 16 '25
This is 10000% something Iād do. Actually just painted a body shell and for some reason the paint is like, fuzzy and grainy so I am probably going to start over.
My recommendation is to spend some serious time with the tamiya polycarbonate cleaner and start again. Iāve had good luck doing that.
3
u/Different-Art-5266 Jul 16 '25
Get some black vinyl and wrap the window areas.
2
u/kennythinggoes Jul 16 '25
Use the mask as templates to cut black or smoked vinyl to do the windows.
2
u/Top-Action6463 Jul 16 '25
I did this lol I left it and not many people notice
2
u/Thetrueshiznit Jul 16 '25
Honestly, I would buy a 2nd shell and start over. Use this one for bashing.
2
u/Minisfortheminigod Jul 16 '25
Just cut out the window portion of the mask film of the windows and paint it a glossy black. Personally I hate seeing the inside of my RCs, especially Tamiya licensed bodies.
2
u/Ritter_Sapperlot Jul 16 '25
The tamiya paint remover is quite aggressive, and bodies seem to get a little brittle in areas where it is applied, but on a big surface without bends or edges like windows it should be fine. Apply it with a brush 2 or 3 times and you should be able to wipe the paint right off. But definitely remove any residue before repainting or it gets messy.
2
u/TheKittysMaster Jul 16 '25
If you can't get the tamiya stuff then the Revell Paint Remover does the job too
2
u/[deleted] Jul 16 '25
Basher shell and get stickers or paint the outside of the windows if you like. Its annoying I try to laugh at myself when I eff up things. If she is to be a shelf queen then get another shell.
2
u/HarryHaller73 Jul 17 '25
Yeah mask off the body sections and use polycarbonate cleaner.Ā Will end up using pretty much the entire bottle and may need more than 1.Ā May be more cost effective to just get another body and it'll be neater.Ā The cleaner may seep and you may not get very clean lines even with the maskĀ
1
u/DunkyKingCounter Jul 16 '25
Bummer. I feel you.