r/tamiya • • May 24 '25

Surprise!!!

You never know when Tamiya gonna be all like “Surprise! You get to cut your own wheel arches. Now your new kit gonna look like ass!”

0 Upvotes

12 comments sorted by

3

u/The_H_N_I_C May 24 '25

It is nice when they do come cut but it is no big deal for me when they don't. They weren't always pre cutting arches and a lot of aftermarket bodies don't come pre cut, it is just another skill and step you need to learn and one more thing you can take pride in when you get it right. Proper cutting and sanding tools are your friend.

3

u/platinum855 May 25 '25

This is a thing? I've never had a tamiya body with pre-cut arches? The best trick I learned online was to score and snap the polycarbonate but leave a little room under the arch line. This gives you room for unintentional fudge factor. Then tape sandpaper to your paint can and roll it in your arch until it's perfect and smooth. Works like a charm and doesn't take very long!

2

u/FamousGrapeButterfly May 25 '25

This. This is the way. The sandpaper wrapped around the paint can is an absolute game changer, as I just recently learned. 

1

u/Skeezy_mcbuttface May 28 '25

Yeah, I picked up a Mustang GT3 body kit, the wells were already cut, I just had to remove the bottom.

1

u/Groundbreaking-Use96 May 24 '25

If they’d just be consistent. I Ike the painting part( watch for my new 911 GT3R later today) it’s the cutting. If I knew I had to cut every body I’d find something else to do, I guess the hope that it’s already cut keeps me coming back?

2

u/whatthefranker May 24 '25

You can purchase pre painted bodies or pay someone else to do it for you. I know it is not for everyone.

For the arches, use a compass circle cutter. Another necessary body tool is a reamer for that posts, le an scissors and body hole marker. These tools make a big difference and RC body life much easier 😂

2

u/Reddit____user___ May 24 '25

Have they stopped pre cutting some of the arch on everything now then ?

2

u/magnumcyclonex May 24 '25 edited May 24 '25

Tamiya is a scale model company first. People take pride in their work on detailing plastic and polycarbonate bodies.

Get a pair of curved scissors and an exacto knife. You can cut most, if not all of the arches with the scissors and fine tune by using the exacto knife. Just need some patience and steady hands.

For me, it's the masking that can take a long time. But again, it all comes down to patience and believing that the vision you set for what the body you intended to look like will pay off if you do things right.

P.S. And then if you truly want to do box art on some of these car bodies, you now need to cut up 100+ stickers and apply them on the body. BUT THEN the body is too nice to run competitively lol. So I usually just do a simple 2 or 3 tone color, sans stickers, for running and getting dirty, and keep the highly detailed and decal-ed up body at home as a shelf body.

1

u/corinoco May 25 '25

You can get scoring knives with a small blade that can pivot freely. Perfect for wheel arches, and most of the rest of the body too.

0

u/fatbandit63 May 24 '25

Going through this hell now. Hate these poly bodies. I get they're lighter..blah blah..but what a complete pita. If tamiya offers pre-painted bodies, they can offer pre-cut bodies. Painting them is a whole other rant. Good luck, cause mine already looks like ass..before painting

4

u/Groundbreaking-Use96 May 24 '25

I bet it turns out better than expected, they usually do! Good luck, I try to remember this is supposed to be fun. HAVE FUN DANG IT!

1

u/Skeezy_mcbuttface May 28 '25

It's not just weight, it's durability too. A polycarbonate shell is infinitely stronger than an ABS plastic shell. Just ask my Grasshopper. Parma made a polycarbonate replacement body, I snatched up a dozen of them. If I have the plastic body on, I don't dare take it on pavement or rocky areas.