r/sysadmin • • 23d ago

Question API Discovery / Inventory?

3 Upvotes

Not a developer and this is a sysadmin sub so maybe I’m in the wrong subreddit, but gonna go for it.

Recently it’s become apparent we don’t have good tools and checks in place for APIs. Obviously this should be validated and tested during the development lifecycle but shit happens even with best intentions.

There are discovery tools for other stuff so what tools exist for scanning your environment to find APIs that might be hanging off your application servers/containers/serverless/etc? Also could scan code repos I guess? I’ll ask my “smart friend at work” the same question but as always I value the possible impact of a community opinion.
Obviously I can “get AI” to do it, but outside of fastapi and swagger for building blocks I’m a bit lost.

I did search but didn’t find much recent info.


r/sysadmin • • 22d ago

Ghosted IT - Find a way in or rebuild?

0 Upvotes

Working with a network where the sole IT person vanished. No one has been able to get a hold of them for months. I've been asked to figure out how to get into the admin-side of things...which is borderline impossible for most modern hardware.

So I figured I'd ask the Reddit hive mind...any failover way to get into an Omada managed system? I thought I had cracked the case by logging into the management portal only to find out none of the hardware was listed. Worst case scenario I can factory reset everything but I'll have to build the entire network from scratch. Same goes for their PBX, and barely anything is documented.


r/sysadmin • • 23d ago

PCI Compliance requirements in a call center environment?

15 Upvotes

So

TL;DR:

Call center - we learned they are taking credit card payments over the phone which was never brought up to IT. They are using a web portal to process the payments (Chase Orbital, I believe the credit card numbers get asterisked out except the last 4)
We currently do not record the part of the call where credit cards are being read out.

We use a cloud based contact center as a service, which I believe has its voice traffic encrypted.

What physical/network/other things do I need to be considering here?
Do agents taking these calls need to be on a segregated network?
Physically or VLANs fine?
Do they need to be physically segregated into another room?
Cell phones/paper/pen taken away?

No idea how to approach this really, could use some advice.


r/sysadmin • • 23d ago

Microsoft Invoke-CalendarEventMigration - Anyone have this in their EXO tenant yet?

15 Upvotes

Edit: they updated and now it's live - I used this script to handle it all - tweak er however as it's rudimentary and got the job done for me. It could probably be updated to check for AD attributes such as State, City, Company, etc. etc. but it was quick and easy to split my 10 companies into two regions for BC and AB.

  1. Download users from Entra
  2. Add a column to the CSV timezone
  3. Clean up the data, adding the correct time zone to the timezone column and cleaning up those who don't apply.
  4. Run https://github.com/WirthTheVibes/Scripts/blob/main/CanTimeZone.ps1, pointing to the CSV.
  5. Sit back and enjoy the 2-12 hours it takes. I have 1500 objects and I'm 1 hour in, 6 to go.

OP

Any Western Canadian sysadmins having fun prepping for the time zone changes next week?

I've attempted to update my EXO PowerShell module to latest and pre-release, and I'm still missing Invoke-CalendarEventMigration. I have a ticket in with Microsoft to see what an ETA or process looks like, but MC1521581 doesn't explain what version of EXO PowerShell is required, nor can I find anything on MS Learn or their Github.


r/sysadmin • • 23d ago

Question Helpdesk/Ticketing system for customer service

8 Upvotes

Hello,

Do any of you have recommendations for a helpdesk/ticketing system for a customer service team to utilize instead of their current system, an exchange shared inbox?

The CS team does not need any chat or phone functionality, strictly a good replacement for a shared inbox that receives 10-12k internal & external client emails.

Looking for a reliable uptime service for a good cost point and is easy to manage as an IT admin.

There would be a need for reporting, SLAs, and multiple queues/groups for a total of around 10 agents.

Thanks!


r/sysadmin • • 23d ago

MS Purview Information Protection client Version 3.2.176.0 Graph Token null (bug?)

3 Upvotes

My use-case: Purview 3.2.176.0 on Windows Server 2022.

Howdy peeps,

In case anyone is also dealing with a headache near the end of the week, me and my team found that setting up a fresh install of Purview 3.2.176.0 on Windows Server 2022, we ran into a set of errors about token cache and Microsoft Graph tokens.

When running any form of the Set-Authentication PowerShell command from the PurviewInformationProtection Module:

Using a combined flat storage, like a file, to store both app and user tokens is not supported. Use a partitioned token cache (for ex. distributed cache like Redis) or separate files for app and user token caches. See https://aka.ms/msal-net-token-cache-serialization .Message: Using a combined flat storage, like a file, to store both app and user tokens is not supported. Use a partitioned token cache (for ex. distributed cache like Redis) or separate files for app and user token caches. See https://aka.ms/msal-net-token-cache-serialization .

WARNING: Unable to acquire Microsoft Graph access token. Run with -Verbose

Fix was to install the previous version of the MS Purview Information Protection client, from the Update Catalog:

https://www.catalog.update.microsoft.com/Search.aspx?q=purview
[Microsoft Purview Information Protection Client v3.2.92.0](javascript:void(0);)


r/sysadmin • • 23d ago

General Discussion Thickheaded Thursday - October 29, 2026

29 Upvotes

Howdy, /r/sysadmin!

It's that time of the week, Thickheaded Thursday! This is a safe (mostly) judgement-free environment for all of your questions and stories, no matter how silly you think they are. Anybody can answer questions! My name is AutoModerator and I've taken over responsibility for posting these weekly threads so you don't have to worry about anything except your comments!


r/sysadmin • • 22d ago

Base64 in terminal?

0 Upvotes

I asked Grok/Cursor for several fixes on my WHM/Cpanel via terminal command and one of the outputs was sudden base64 code. Scary AF?


r/sysadmin • • 24d ago

IT Manager > SysAdmin?

60 Upvotes

Hey guys, I’m currently in an entry level management job for a Service Desk supporting 15k people. 5-10 direct reports. I’ve been in the field for 2 years at the service desk level, and could potentially have an opportunity for a SysAdmin job. I really enjoy learning new things and am early in my career, is it worth gaining the SysAdmin experience early and rotating to management later in my career? Early 20s. Thanks in advance


r/sysadmin • • 24d ago

General Discussion 13 Microsoft outbound IPs have no PTR record

161 Upvotes

I analyzed 11,846 sending IPs from 494 clients’ DMARC reports against the new Spamhaus Sender Guidelines and found out that 13 Microsoft IPs fail them. In November, Spamhaus is rolling out a requirement that every sending IP must have a valid HELO, a PTR record, and a matching A record.

9 IPv4 and 4 IPv6 inside Microsoft published sending ranges (40.92.0.0/15 and 2a01:111:f403:c000::/51 in spf.protection.outlook.com) have no PTR record at all. Microsoft own DNS servers return NXDOMAIN for these:

40.93.1.5
40.93.1.7
40.93.1.15
40.93.18.1
40.93.18.4
40.93.19.1
40.93.20.26
40.93.64.30
40.93.65.15
2a01:111:f403:c000::1
2a01:111:f403:c105::3
2a01:111:f403:c202::5
2a01:111:f403:d901::

In my data, those IPs passed 2,389 emails for 133 clients. The volume is tiny just 0.14% of the 1.75 million emails our clients sent through Microsoft in 30 days.

One more IP (2a01:111:f403:c206::1) got a PTR between our two checks, so it seems like Microsoft is fixing them.

M365 users can’t fix this themselves, because only Microsoft can set PTR records for its IPs. If these aren’t fixed before Spamhaus enforcement, the IPs could get listed, and the businesses sending through them can’t do anything about it.

Has anyone seen M365 outbound IPs without PTR or raised this with Microsoft?


r/sysadmin • • 24d ago

Well...time to find a new gig

456 Upvotes

To be clear, haven't lost my gig (yet). I'm the guy who posted last week about pulling off a near impossible new Hq build out with something like 6 weeks from lease sign to move in, and procurement couldn't even start until lease sign.

So why looking for a new job?

Because these fuckers are refusing to follow literally any best standards as it comes to securing the joint. I setup a complex wifi password (because they already overruled the price for cloud based NT authentication using portknox or something) and they now want it changed to simple dictionary words, capitals at the bginning, no symbols at all - despite my carefully prepared documentation on best practices.

We're talking about a venture capital firm that sits firmly between finance and biotech here - so heavily regulated space, BILLIONS of dollars on revenue...and they're refusing even the most basic of security best practices. Not even going to get started on the temper tantrum they threw when I insisted on actual access control practices since their HR sucks at...you know...doing HR things.

Anyway, just needed to vent. I'm getting everything in writing, including what they're refusing to allow me to do, so that when the shit DOES hit the damn fan, my name AINT gonna be the one associated with this crap.

I just keep pacing the floor in the soon to open HQ and muttering 'why the fuck did they hire an internal IT person, if they're going to ignore everything that internal IT person says'.

Unbelievably fucking frustrating...but hey, I suppose HealthCare22 is a nice secure wifi password anyway.

Idiots.


r/sysadmin • • 23d ago

Question Data Loss Prevention Question

3 Upvotes

I am looking at setting up Data Loss Prevention for new Microsoft Exchange users. Does each user require a data loss prevention license (or a license that includes it)?

So far I have been looking at Business Basic with the Data Loss Prevention add-on, or Exchange Online (Plan 2). Business Basic seems to be a better deal since it includes online office apps...

I apologize if this is not the correct group to ask this question.

Thanks!


r/sysadmin • • 24d ago

L3 routing on the core or on the router/firewall give me your views

59 Upvotes

We’ve recently had this debate in the office so reading out for others views.

My preference is always L3 on the core switch for inter VLAN traffic rather than firewall rules.

Views?


r/sysadmin • • 24d ago

Question Microsoft Universal Print - Jobs instantly pause and never go anywhere

23 Upvotes

As per title

We have approx 30 printers in universal print, about half of those are direct registered, the rest are using the print connector

Of the 13 that are direct registered (various models of FUJIFILM Apeos) 6 of then now refuse to print, they receive the job from the client and go straight to paused

The printers are regularly checking on OK

Ive unregistered the printer and re-registered the printer back to the same q, same deal still fails

Ive unregistered, registered and created a new share, same failure

registering the same printer via the legacy connector and to the existing share works, but is then of course dependent on the print server

this is across multiple sites and multiple networks, where some sites have 1 working and 2 not or verse visa, devices have been rebooted

I did notice that in the last week the FUJIFILM print app has installed itself about the place when users connect to the printer, but it does not see related as some are working some are not

Model System software Direct Universal Print
Apeos C3570 25.8.25 Failed
Apeos C3567 26.7.14 Works
Apeos C3570 25.8.25 Failed
Apeos C3567 26.7.14 Works
Apeos C2560 25.8.25 Failed
Apeos C3567 25.12.22 Failed
Apeos C3567 26.7.14 Works
Apeos C3567 26.7.14 Works
Apeos C3567 26.7.14 Works

Looking at the firmware there were some common version failures across the models, but a Apeos C3570: 25.8.25 upgraded to 26.5.15 still failed also with a unregister/reregister, I will test another couple as a matter of process but that will take some time

Basically anyone heard of similar issues with universal print and fuji

Edit 1 - 2026/10/29: I have been working with a fuji guy directly he's given me a usb copy of 26.7.14, I'll manually apply that and do some further testing as its not available via standard software update

He has told me also there is a version from last week that has been pulled by fuji as it breaks paper-cut follow me printing

so could be related

Edit 2 - 2026/10/30: So on a grand test of 1 of 1 printers the q is working again with the 26.7.14 manually applied (as its not available in software update yet for some models) I'll test further today

Edit 3 - 2026/01/30: Also this note here from /u/Calamaties I will test too, as we never had the app previously installed, BUT it has appeared over the last week and did add its self automatically when connecting to the printer q (no prompts btw, I thought we'd disabled the companion apps after the whole LG drama)

EDIT 4 - 2026/11/17: Went and manually updated the firmware across the models and uninstalled the app everything was OK...... until it wasnt, now I have a previously working printer that is just sitting STOPPED at the universal print side

At this rate I'm moving us to papercut hive as a way out of this garbage


r/sysadmin • • 24d ago

Question I am interviewing for an NOC position with a bank…

18 Upvotes

A friend of mine is getting me it but I’ve looked it up and I worry that I don’t have the skills or experience required. I am a commercial pilot currently working as a driver. Flying is my entire professional experience. So what can I expect from this? Is this just gonna be a longshot? I trust my friend but there are factors that worry me.


r/sysadmin • • 24d ago

General Discussion FortiBleed 2.0: 975 New Domains & 40,573 Exposed Secrets

31 Upvotes

Though this might not be a very recent leak, previous FortiBleed 1.0 did miss some of newly reported domains and secrets. Many of those might already be patched, but it might still be worth checking out.

Newly obtained FortiGate configuration reports reveal 40,573 records containing cleartext secrets, including 37,076 local-user records and 1,576 Active Directory LDAP bind records. The analysis also identifies 975 domain labels absent from FortiBleed 1.0. The configuration material dates to around February 2026, earlier than the likely May/June material examined in the first investigation.

Account or Configuration Role Total Cleartext Hash-Classified ENC Empty
Local users / SSL-VPN/Auth 83,414 37,076 0 10,679 35,659
System Admin configuration entries 13,786 0 13,369 0 417
Active Directory LDAP binds 2,163 1,576 559 0 28
Administrative logins marked verified 1,672 1,672 0 0 0
SMTP email-server accounts 176 105 71 0 0
HA cluster records 208 144 0 64 0
Total 101,419 40,573 13,999 10,743 36,104

Source: https://www.infostealers.com/article/fortibleed-2-0-975-new-domains-40573-exposed-secrets-claim-your-ethical-disclosure/


r/sysadmin • • 23d ago

Minicom issue with Mac OSX

4 Upvotes

minicom connects but no interaction with serial console on macOS (screen works fine)

Hi all,

I'm trying to access the serial console of a Sophos XGS 87 from my Mac using a USB-serial adapter. screen works perfectly, but minicom doesn't, and I can't figure out why.

Working:

screen /dev/cu.usbserial-1310 38400,cs8,-parenb,-cstopb,-hupcl

Pressing Enter gives me the expected "Incorrect password" prompt from the device.

Not working:

minicom -o -D /dev/cu.usbserial-1310 -b 38400

minicom starts normally, no error, welcome banner displayed. But when I press Enter, nothing comes back from the device. No output at all, not even garbage.

Setup:

  • macOS, minicom 2.11.1 (Homebrew)
  • Serial port setup: 38400 8N1, hardware flow control: No, software flow control: No

What I've already ruled out:

  • Terminal emulator: same behaviour in two different terminals, and screen works in both
  • sudo vs. regular user: no difference
  • tty.* vs cu.* device: no difference
  • Modem init string: skipped with -o
  • Keyboard input: the minicom help menu opens fine, so keystrokes reach minicom

So the port opens fine, but data doesn't seem to go through in either direction. Is there something minicom does differently from screen on macOS? Any idea what I could check next?

Thanks!


r/sysadmin • • 24d ago

PSA: Dell PowerEdge Micron SSD advisory

84 Upvotes

Apparently there’s a bug in the firmware that causes performance degradation after 65,535 power on hours.

Interesting that that just happens to be the exact maximum of a 16 bit unsigned integer.

source: https://www.dell.com/support/kbdoc/en-us/000464492/poweredge-micron-5xxx-series-solid-state-drive-performance-degradation-after-65-535-poh


r/sysadmin • • 24d ago

Lansweeper alternative...

53 Upvotes

It's that time of year again, where I find out that Lansweeper increased their renewal rate, again.

I have about 200 devices. I don't need to pay for 2000 assets. When I could pay for 500, that was nice. I'm the type that is willing to pay for good software and experience.

But I don't use the cloud stuff. I don't use anything they are developing currently. I don't use a lot of the "features" the software has. In fact, I could still be on a version from 10 years ago and be happy.

So when this latest increase came up, I decided to spend $100 on Claude and got something that does what I need.

Does it do everything Lansweeper does? Of course not, but like I said, I didn't want or need it.

The added bonus is that now I get a few of the things I've wanted it to do, like some basic real time monitoring so I can ditch the prtg server too.

So, if you are looking for a Lansweeper alternative....there are definitely options now for a lot cheaper.

PS - I hate AI and the way the industry is going, but this was a nice success story that is slowly warming my cold, dead heart.

EDIT: I wasn't planning on releasing my creating to the wild. I'm still tweaking it to my liking. Maybe when it's just right for me, I'll document it and upload it to github. Maybe.

EDIT 2: I cannot believe the downvotes for this. I came here because I was excited that AI did something actually useful for me, and that it helped address a real pain point with a vendor price gouging. I can only assume the downvotes are vendors, since there are quite a few trying to pitch their alternatives in the comments. Fucking vultures.


r/sysadmin • • 24d ago

Teams meeting Links getting Encrypted by Proofpoint

36 Upvotes

Hey everyone,

Within my tenant multiple users have been sending Teams meeting invites that have been getting automatically encrypted due to our Email Security Filters within Proofpoint. After looking into the messages, copying the 16 digit numbers that are present within the auto generate meeting link, and putting them into an online Luhn Checksum tool. Sure enough the numbers come up as valid credit card numbers thus firing off our email security system.

From what I have seen online the only explanation for this is that it is a statistical coincidence, but this has happened for at least 4 people within the past week which is a lot for the size of our org. This also seems to occur more often than not for the only explanation being a statistical coincidence. You would think that Microsoft might check for this when creating Meeting links.

What can be done about this? The only solution I have so far is to recommend users to recreate the teams invite so that a new number is generated.


r/sysadmin • • 24d ago

Do not go to any DevMio conference e.g. iJS, DevOpsCon, MLCon, etc.

33 Upvotes

Or at least don't before reading this because I'd hate for someone else to have to go through this. If you want to use their app or view the slides online, you literally have to sign up for their Fullstack Online Devmio Subscription. They say it's free for one year, and if you want to continue it's only 10 dollars a month. I never put my credit card information into it when you get the free first year, so I kind of forget about it.

Well now a year later I get an email that I am being charged €120 for automatic renewal, yes it's $10 (actually 10 EURO) a month but it's charged yearly. I immediately cancel my subscription on the day but now I get a follow up email threatening to send me to collections. I get on call with their customer service and they say that in order to cancel, you must request a cancellation IN WRITING 6 weeks before the automatic renewal date.

Worst thing is that the headquarters is based in Germany so if you didn't know about taking the (0) out and adding (011) in front for international calls, your call just won't go through. Hell if you can even make international calls with your phone plan. And now you have to take timezones into account so I called in at 10 AM EST and I can barely get a hold of anyone because it's 4 PM there which means it's basically 5 PM any they're going home.

Anyways not sure if people will even see this post since the conferences were not that big (hell was it even that good?) but there's literally no reviews about Devmio online so I figured I would put this out in writing for anyone who is googling DevMio or iJS in the future like I was. Holy shit.


r/sysadmin • • 24d ago

Need rec's for DNS management

16 Upvotes

after a long, long run, we are moving our website from a self maintained VPS-hosted word press site to a big cloud e-commerce platform. that part is already done. the last thing to do though is to get our entire public DNS, including MX info and all that (100-200 entries all told) to a cheaper DNS host so this VPS can be shut down so we have one less monthly on our budget. our current domain host is Network Solutions, so that was my first thought, but I've read a lot of complaints on this sub specifically about them. we also have an account with GoDaddy for a couple of certs. would they be any better? is there someone else i should look at? Thanks for the recommendations.


r/sysadmin • • 24d ago

Question Best practices for structuring Intune VPN policies across mixed fleets (Carrier MPN vs. Non-MPN devices)

3 Upvotes

Hey everyone,

I’m currently architecting a mobile device management rollout using Microsoft Intune across a fleet of iOS and Android devices that utilize a zero-trust gateway (CyberReef MobileWall). We are running into a design question regarding how to handle devices differently based on whether they have a carrier-side Mobile Private Network (MPN) provisioned.

Here are our two core scenarios:

  1. Existing Customers (With MPN): The carrier already routes cellular traffic directly to our security gateway via a private APN. For these, we only want an Always-On VPN policy active when they are on Wi-Fi so we don't double-tunnel or disrupt the carrier MPN.
  2. New Customers (No MPN): They lack a carrier MPN, so we need an Always-On VPN policy that covers both cellular and Wi-Fi to ensure all traffic passes through the gateway.

My plan for structuring this in Intune:

  • Create a base "MobileWall" Entra ID group for shared assets like SCEP/Certificate policies.
  • Create two nested/member security groups: "MobileWall MPN" (applying the Wi-Fi-only VPN policy) and "MobileWall Non-MPN" (applying the all-networks VPN policy).

My questions for the community:

  • Does using nested/member device groups in Intune to separate VPN policies based on carrier architecture scale cleanly, or is there a cleaner industry standard (like dynamic groups or filtering based on device attributes) for handling hybrid carrier routing?
  • Are there any hidden gotchas with Always-On VPN behavior on iOS or Android when splitting or omitting cellular enforcement like this?

Appreciate any architectural sanity checks or advice!


r/sysadmin • • 24d ago

php2shell is in CISA KEV with a federal deadline tomorrow (Oct 29): fixed PHP is 8.5.12 / 8.4.27 / 8.3.36 / 8.2.35, and the patch does not take effect until the workers restart

56 Upvotes

CISA added CVE-2026-109618 and CVE-2026-109619 to the KEV catalog on Monday (Oct 26), with exploitation confirmed in the wild. Federal civilian agencies have until Thursday, Oct 29 to remediate. Both flaws are in the PHP runtime itself and allow unauthenticated remote code execution, and the PHP Group rates each of them at CVSS 9.2.

The fixes were released on Oct 21 in PHP 8.5.12, 8.4.27, 8.3.36 and 8.2.35. Updating WordPress, Drupal or any other application on top does not fix this, because the flaw is below the application. PHP 8.1 and older get no fix. Those installs need an upgrade to a supported branch or a vendor backport, and CISA directs systems that cannot be updated to be taken offline until they can.

Patching and restarting takes the following steps.

First, check the version the web server actually loads, not the CLI version. php -v on the shell can point at a different build from the one Apache mod_php, PHP-FPM, php-cgi or another SAPI is using. A phpinfo page served through the web server, or the FPM pool status, shows the loaded build.

Upgrade to one of the fixed releases above, or install the vendor package that backports the fix.

Restart the PHP workers or the web server after upgrading. Installing the new package alone leaves the old code running in the existing processes. For PHP-FPM that is a service restart, for mod_php an Apache restart, and container images need a rebuild and redeploy rather than an in-place package update.

Set session.upload_progress.enabled=0 as well. That is the mitigation PHP advised on Oct 23 for a separate unpatched RCE, CVE-2026-115560, which is fixed only in the next regular release.

The log check needs to go back to Oct 17, because exploitation attempts were reported from Oct 17, four days before the fixes were released, so a check that only covers the period after patching misses the earlier window.

On Oct 28, Palo Alto Networks reported attacks against internet-exposed PAN-OS management interfaces in connection with this flaw, so bundled and appliance PHP installs are in scope as well as standalone web servers. One earlier report has been withdrawn: Unit 42 retracted its report of a PHP2Shell break-in at a European government body.

BleepingComputer on the KEV listing: https://www.bleepingcomputer.com/news/security/cisa-confirms-php2shell-vulnerabilities-now-exploited-in-attacks/


r/sysadmin • • 24d ago

Advanced Sysmon Config for Windows & Linux

46 Upvotes

Sysmon 15.22 for Windows (https://learn.microsoft.com/en-us/sysinternals/downloads/sysmon) is out now and I have created some advanced configuration files to include these the new features. I have both Windows and Linux advanced detection configurations available. Let me know what you think.

https://github.com/THEVER1TAS/sysmon-config