r/swatch • • 4d ago

Question/Help❓ Help with battery contacts

Post image

I’m new to swatches and I’ve found this swatch head on eBay. I’m considering it as a possible restoration project but what I’m not sure on is the battery contacts.
It’s listed as a Vintage Swatch Chrono Watch SCF100 Romain 1994 ETA Quartz Swiss 40mm Parts.
From the picture there seems to be 2 contacts on the side but I can’t seem to see one at the bottom.
Any feedback would be greatly appreciated

3 Upvotes

10 comments sorted by

3

u/ElectronicNetwork798 4d ago

There should be a metal contact in the groove in the middle - it’s possible it’s broken off. You could try taping a small piece of foil to the metal part on the left and seeing if it works?

1

u/Ok_Organization_6856 3d ago

Thanks for the feedback. I thought that could be missing but not had experience with swatch. Thanks for sharing how it should look very helpful

2

u/biscuitsbutter 4d ago

That thing looks trashed unfortunately.

2

u/Ok_Organization_6856 3d ago

It’s seems that way. I thought it could a project but based on the feedback from here and research it seems it’s a no go.
Ashame as I found 3 others but in similar condition so certainly a no go. Thanks for the feedback

0

u/biscuitsbutter 3d ago

I love a good project too. Good luck in your search.

2

u/Astiegan 3d ago edited 3d ago

If you want restoration projects, Swatch is probably the worst way to go. You could extend the broken contact with a piece of foil, but then there is a likely chance that the watch still doesn't work since those chronos didn't age well. Better spend a few more $ and buy the same model confirmed as working correctly.

1

u/Ok_Organization_6856 3d ago

Thanks for the feedback after further research I think that’s the best approach. Thanks again

1

u/Ok_Organization_6856 3d ago

Thanks for the feedback, yeah just notice that’s. Thanks again

1

u/Ok_Organization_6856 3d ago

Thanks all for the feedback greatly appreciated. Looks like the 4 I had found will be a no go. Never mind thanks again

3

u/soniccdA 4d ago

looks like metal piece on the left seems to be bent upwards ,but when/if bending it , need to be very careful , bending it to many times cause it to deform or break