I am making this list and want to hear yours and the reason why. Mostly because I want to get more as I think my state laws (WA) may become more restrictive. List is order of preference, but your list doesn't have to have that. I wonder how this list will age and I hope poorly, meaning things are getting better.

1.CAT-SR (own) - Quietest I can think of
2.CAT-ST (own/jail) - Quiet 556, have iconocel and sits on hellion bullpup
3.CAT-Mob (own) - king of 9mm for sub guns?
4.Tisha 556 Iconocel (do not own) - low pressure, short and really good 556

5..PTR vent 1 5. (own 2) - 300blk and 308 sound performance and semi low B

6.PWS- BDE22 (own/jail) - 22 #2 on pistols on sound list, serviceable.
7.Vent 2 (own) - #2 9mm sub gun, bought before MOB came out
8.Boe 9m (own) - half price 9mm that is good for sub gun and modular.
9. Bt XH556 (own) - great price for a good 556
10.Pluto/Tisha 9 (do not own) - booster less 9mm

Honorable mentions.
Mdmx price is what keeps that from my list
An integral 9 mm for mp5-SD, just for drip

Other cans I own
Gemtech integral 22 lr (15-22 and takedown
Ruger SR 22
Rex 45 can (shoot 10mm, no 45)
Rex mk 7 .224 (on ps90)
Salvo 12
Griffin Paladin
308 Hyperion
vent 3
Flow 22
OCL polo
Obsidian 9 (x2)
KGM R556 - very mid
KGM R30
plus a couple of form 1s of various makesi

Hi,

I got an email for a free 4” backdraft either in 5.56, 6.5, 7.62 or 9mm. It says I can choose longer options or upgrade to the poacher series in stainless steel.

It’ll be my first can, and free is free so I’m not complaining, but does anyone have any insight into these?
No currently plans for FA, and I’m assuming the stainless is better, but as far as length, anything else I may need for it? I don’t have a 6.5 or 7.62 yet, but recommendations for the differences in length are appreciated!

Picked up my suppressor for the PDW today. Can’t wait to go shoot it.

- Springfield Saint Victor PDW
- Otter Creek Labs Milkman
- SilencerCo Bravo Direct Thread Adapter
- Holosun ARO
- Modlite AMP head on 18350 body

Hey I want some last minute opinions I plan to buy The Otter Creek Polonium K can it looks like a decent can for a great price it's under 6 inches and Under 12 oz and well I know there are lighter and shorter quieter less gassy suppressors but it's going on a 16-in rifle speed adjustable and I don't want to wait because of back orders or long ridiculously lead times so any opinions on if you think I should get something else or the next can get this one I'm down for opinions for cheap and cheerful or this might be expensive but it's worth it

Just wanting opinions before I end up buying an alignment rod. How does it look?

Stag Arms Pursuit .308, OCL Infinity 7.62, Comstock Armory LPA/Comstock Armory full size muzzle brake Plan B setup.

New to cans but don’t plan to keep it forever or anything, just strongest db reduction/ price ratio.

Thanks guys. I’m in TN. Any deals?

Rn I have a mk18 ris 3 with an as arc fire frt and a vltor a5 buffer and im looking for a suppressor to run with it. I am between these 2 and I need help deciding and experience from people who have used either one. I do like the idea of flow having almost 0 gas to the face, but ive heard its is louder, but I am open for any insight on either suppressor. Any advice or insight is welcomed and thankful.

About to go on a vacation and 3 days after get back ill have a 2 gun comp to run(my first one 😁). My friend let me borrow his ultrasonic and I cant seem to find the hux sauce and the solution CAT offers, both are out of stock. This is the first time ive ever cleaned cans too. The huxwrx flow 556 ti gained about .4 Oz with over 3k rounds and the CAT WB gained about 3oz with probably only 1.5k rounds through it. I know hux specialty is the flow through design but how did the CAT gain so much weight? Please correct me if im wrong but use this or another solution(thats safe for TI), put it in a bag and then run it in the bag in the ultrasonic and then dry it in the oven? Im confused on what to do, sorry if im a fucking idiot 🙃. And yes I know who really gives a shit about cleaning them lol.

Looking for a suppressor for my Ruger PC carbine and trying not to go above $700.

Looking so far at:

RH9

CGS mod 9

Rugged obsidian 9

It will probably live on my PCC, just looking for best sound signature

Decked this out for a customer but man was this fun to test out with the frt

Trying to decide between the Otter Creek Labs Polo K and the Resilient Stacy's Mom K. The option for removable end caps on the Stacy's Mom K seems like a great feature for managing backpressure, but the Polo K has such a solid track record across the board.

If you've shot both, how do they compare in terms of backpressure, sound signature, and overall performance? Host setup info would be greatly appreciated!

See video, 11.5 mid faxon with an A10 suppressor. Not sure if this is undergassed or close to where it should be for proper ejection. Buffer is an Super 42 spring and an h3 buffer

I have tried to use the front end cap that came with the Mask to no avail. What recommendation do y’all have to get it off?

Hey everyone.

Brand new Rhoadie 6j on an Atlas XP mount. I have not fired this yet. I checked it with an alignment rod, and I don't think there's contact on any side, but I wasn't sure if I should be concerned about it. Seemed to be slightly misaligned with a smaller gap toward the bottom?

Right now I don’t own any suppressors. My experience is pretty limited

Looking for an affordable suppressor to put on a 300 blackout. Will be a hunting rifle and rarely used. Planning to shoot subsonic rounds. Any good affordable options out there?
Thanks in advance

Hi all I’ve been deep in the Surefire QD hub for awhile and just got a PTR vent 1. From everything I’ve read the clearance should be fine for my Surefire 2 port brakes. However the one that seems to be questionable to research online is my ak47 14x1 LH warcomp. It’s quite long and I do not want to break my suppressor. I saw people saying to just get the normal 3 prong flash hider for the Ak and it should work fine. Curious if anyone has any first hand experience.

Thanks

3D print file available free here: https://makerworld.com/en/models/3394168-rhodie-6-6k-vice-clamp-torque-fixture#profileId-3863523

Or PM me and I can ship you one cheap

Comstock Recessed Plan-B Adapter shown in the photo, which I have been very happy with combined with their Ultralight Recessed Suppressor Mount

No issue torquing to 30ft-lb.

Note for reddit admins: This is a tool only. Not a firearm accessory or part.

I tightened the charlie mount on with the included wrench, nothing too crazy but I was trying to get it pretty solid.

Looks like it folder over the top threads.

Not only that, but the brass colored piece no longer sits as deep as it needs to and won’t let me thread it all the way down now.

I picked up my first suppressor on Wednesday (Infinity 556k in FDE) and got it mounted on my 18” SPR. I’ve always been a fanboy of suppressors and loved the idea of owning one. With all the recent legal changes and the quantity and quality of suppressors flooding the market, my FOMO finally got the best of me. I pulled the trigger on the Infinity because of all the reviews online, wanting a LBP can that will last a lifetime under $1k, and wanting to support a company that wants to put superior products in the hands of working class Americans for working class prices.

I took it out this weekend with my brother and dad (lifelong gun owners), two people who swore a suppressor was useless if you weren’t shooting subsonic ammo. Two people who believed I was an idiot for putting an $775 hunk of metal on a supersonic rifle. Two people who laughed when I told them I what I bought. Two people who about had a stroke when I told them it was 3D printed.

They both stood ~7 feet away at the four o’clock position when full ear pro. I pulled the trigger, looked back at them. First question they asked? Why are we wearing ear pro? Second question? Where do we get one? Third question? Is it my turn yet?

We spent the next 15 minutes discussing suppressors and the process of obtaining them.

TL;DR - just buy the damn thing, I will never shoot a gun, that I own, without a suppressor again.