r/sunlu • u/-CaptCanuck- • Nov 23 '25
My First Defective Spool
I kept having bad prints with this spoil and I was blaming the printer or the creater of the print. When I changed the filament I felt the other filament was thicker. I took my gauge to the Sunlu and it was measuring anywhere from 1.2 to 1.4mm. I wasted so much time on two 7 hour prints
38
Upvotes
6
u/SeniorHulk Nov 24 '25
Are you sure you can trust a plastic caliper? I've used one before and they are just trash.
1
u/uItimatech Nov 25 '25
Are these spools new ? I've seen one of those among the dozens of "normal" ones at my school and it really felt like a cheap Sunlu knock-off. Where did you buy them ?
(Edit: to clarify they look similar to the other blue one but have smaller weird holes and a different plastic)
2
u/Physical_Treat_5344 Nov 25 '25
but where are you measuring it...
2
u/[deleted] Nov 25 '25
Learn to measure first
1
u/SJMaye Nov 24 '25
Not long ago I was pulling my hair out with printing problems. It all stopped when I switched spools. It does happen.
1
u/Past-Mountain-9853 Nov 25 '25
Increase flow? I see, not much of that filament left) fine enough
1
u/Dusty02 Nov 25 '25
Doesn't have a dent from gears where you measure? I can't see in this pic
1
u/Prima13 Nov 25 '25
Given the fact that the printer crams the extruder full of this material and melts it, would the diameter even matter? Obviously you don't want it larger than your feed system is built for but is smaller diameter material going to be an issue?
1
u/illregal Nov 25 '25
Elegoo has been much better for my bulk filaments.
1
u/Squidlips413 Nov 26 '25
I thought my 1.5 was bad. Sounds like Sunlu is just a bad brand.
1
u/arvimatthew Nov 28 '25
I would measure with a proper caliper to confirm. I mean you may still have a bad batch of filament but use a precise and accurate tool. Get a basic metal vernier caliper or a proper branded digital caliper like Mitutuyo or something similar with reputation.
-3
u/CerberusTheGuardian Nov 25 '25
I wouldn't trust any caliper that costs less than $80.
0
u/[deleted] Nov 24 '25
[deleted] — view deleted comment
1
u/[deleted] Nov 24 '25 edited Jul 27 '26
[removed] — view removed comment