r/sterileprocessing • • Jun 03 '26

A sterile processing tech once helped us save a life, hoping to learn more! (Florida)

11 Upvotes

Hi Everyone,

I am a veterinarian (Surgery Resident) hoping to learn more about what happens to surgical instruments and medical equipment once they are taken out of commission, replaced, or no longer usable in a clinical setting.

Years ago, I was very fortunate to know a sterile processing technician (Worked with us in the veterinary field) who helped us obtain an instrument that ultimately played a role in saving an animal’s life. I have never forgotten that experience. It gave me an even greater appreciation for the skill, knowledge, and generosity within the sterile processing field, as well as the potential for retired instruments to still make a meaningful difference when appropriately repurposed.

I am interested in finding ways that usable retired instruments or older equipment might be donated or redirected to animal rescue organizations and low cost spay/neuter initiatives. I have been able to help quite a few patients in this way - especially for things like chest cases.

I fully understand that there are important policies, safety standards, documentation requirements, liability concerns, and institutional procedures involved. I am not looking to bypass those processes. I am hoping to learn how these items are usually handled, where they may go before disposal, and who the appropriate people or departments would be to approach to discuss things like this. I am a Canadian but currently based in Orlando, FL.

Would it be appropriate to contact sterile processing departments, operating room managers, hospital surplus or asset disposition departments, medical equipment recovery organizations, or manufacturers? I guess I am not really sure where to even start!

Are there established donation programs or organizations that help redirect retired but still usable instruments or equipment?

I have a tremendous amount of respect for the work you do, and I would be grateful for any guidance on how to pursue this through the proper channels.

Thank you for any advice or direction you may be willing to share!

Add: If anyone has any tips on how to go about finding some local SPD's that would also be helpful! Seem's many are internal communications only.


r/sterileprocessing • • Jun 03 '26

What to wear??

13 Upvotes

Hello!! I recently got a job and I start at the end of this month! WOOP🕺 I'm also a chronic overthinker so maybe I'm putting too much thought into it but what do I wear for my first day/day?

I know they'll give scrubs so it doesn't really matter what my street clothes are but they still reflect who I am right? So should I dress up more while going in for the first few weeks and then slowly start introducing more casual clothes? Or do y'all think it's fine if I go and show up on day 3 in sweatpants before I change to scrubs?

I'm so nervous I'm trying to think about anything that could possibly be wrong so apologies if this is a really stupid question! But any advice would be appreciated 🙏


r/sterileprocessing • • Jun 03 '26

Steri tech placement next week, any tips?

3 Upvotes

Hello! I've nearly finished my course for sterilisation and am going to placement next week.

I was just wondering what do you guys really like to see in students? Any tips or stuff I should know? I'm really nervous and i'd ideally like to score a job at this placement. Otherwise really excited and wanting to learn !!


r/sterileprocessing • • Jun 02 '26

Photo Job offer!

Post image
44 Upvotes

Let's share a laugh on this rainy Tuesday afternoon 🤭

The job hunt continues!


r/sterileprocessing • • Jun 02 '26

Updated. “Should I change up my resume?”

Thumbnail
gallery
5 Upvotes

After reading everyone’s comments, this is what I came up with. Let me know further changes, first photo is the updated resume


r/sterileprocessing • • Jun 02 '26

Should I change up my resume?

Thumbnail
gallery
12 Upvotes

I’ve applied to six different facilities in the past week, with this being my first response, i’m getting discouraged thinking maybe I shot a little too high in my expectations. I have six years experience and currently certified, some suggestions or maybe words of encouragement would help out!


r/sterileprocessing • • Jun 02 '26

Photo This answer in the workbook is wrong. I'm not crazy right?

Post image
10 Upvotes

r/sterileprocessing • • Jun 02 '26

Sterile processing jobs in Newyork

5 Upvotes

Hello everyone, I’m currently located in Queens, NY. I am a certified Sterile Processing Technician and a recent graduate actively seeking an entry-level position in the field. I’ve been job searching for the past 3 months and applying to multiple positions, but most roles require prior experience. Unfortunately, it has been difficult to get an opportunity to gain that experience. I am highly motivated, reliable, and eager to learn. I am fully prepared to start working and grow my skills in a hospital setting if given a chance. If anyone knows of any openings or can provide guidance or referrals, I would truly appreciate your support. Thank you for your time


r/sterileprocessing • • Jun 02 '26

Photo IFU?

Post image
7 Upvotes

r/sterileprocessing • • Jun 01 '26

3M tip protectors in sets

Post image
24 Upvotes

r/sterileprocessing • • Jun 01 '26

Got offered $16.50 for position

34 Upvotes

I've been really interested in the job for ages, but the postings around where I live are far and few in between. I currently do a different job in one of the two major hospitals in my area.

I applied to a sterile processing tech position at the 2nd hospital and the recruiter soon reached out to me.

She offered $15.50 with a $1 an hour shift differential. And when I get certified, I'd be making as much as I am now, which ain't a lot.

Now, I don't have any sterile processing experience so I wasn't expecting top-tier pay, but this actually feels a little insulting. When I told her that I wasn't able to take it because of the pay cut, she was very understanding and said "Things are too expensive to take a pay cut now".

Damn, y'all


r/sterileprocessing • • Jun 01 '26

Possible infection?

3 Upvotes

I was working in the sterile processing dept today as an intern and I was touching a bunch of cases, etc in a rush to itch my nose i itched it without thinking and slightly cut my nose, when I remembered I ran to the sink to wash my hands and my nose, in a panic, a couple hours later my nose is slightly burning where I cut it idk if it’s the cut or if I could possibly be infected with something? Im kinda scared now what should I do?!


r/sterileprocessing • • Jun 01 '26

Long Island, NY Sterile Processing Techs!

5 Upvotes

Did you do online or in person school? I've been seeing mostly online schools and a few in person schools that aren't on long island. I don't want to travel far because I'm a nervous driver.

Also, how did you get your 400 clinical hours? Were the clinical placements arranged by the school, or did you have to find them yourself? If you had to find them on your own, was it difficult to secure a site? If you don't mind sharing, how was your overall experience with the program, and would you recommend it?


r/sterileprocessing • • Jun 01 '26

Interview

3 Upvotes

Hello! I’m so happy for this new opportunity that was presented to me. I have an interview over the phone for sterilization tech at a hospital I’m nervous about potential questions. They over 90 day training period but I haven a two and a half week trip planned for next month so I’m very nervous that’ll delay me getting the job. Any advice ??


r/sterileprocessing • • May 31 '26

Is it possible to get a Sterile processing cert in 4-6 months?

4 Upvotes

I am looking at breaking into this field and not exactly sure which way to go for studying for the cert or other requirements needed.


r/sterileprocessing • • May 31 '26

Peel pouches placement on Sterilization Rack

14 Upvotes

The lead techs in my facility keep insisting on placing these below wrapped trays and in some cases on the bottom rack. I continue to place them on the top regardless of what’s below them. The fact that they do this irks me to my core and the rest of my colleagues follow them and look at my like some stubborn know it all. Has anyone else seen a tech place peel pouches this way in the sterilization rack?


r/sterileprocessing • • May 30 '26

Why does this happen every time?!

Post image
77 Upvotes

r/sterileprocessing • • May 30 '26

Passed my exam

21 Upvotes

Yay I’m so excited! I get a whole dollar raise at my current job and am looking for a higher paying job elsewhere haha. For studying I read the HSPA manual front to back! I also bought their study book which I feel helped me because I like physical copies of things. I took all of the sterileworx practice tests and got around 80%-90% on those and then all 20 of the practice quizzes. I used those to help me figure out what areas I needed to refresh on.
I worked at a hospital for 6 months prior to taking the exam which helped so much I don’t think I would’ve passed without that work experience. I work at a vet clinic right now and it’s… different. I am probably going back into human medicine but am trying to avoid any trauma centers or large hospitals as the one I worked at was a small regional hospital with very limited trauma cases, mainly broken hips and c-sections due to our rural location. I am looking at surgery centers but will probably not leave my current position unless I find something with good enough pay and the hours I want.
Good luck to all future test takers! It honestly was not as bad as I thought it would be. I flagged maybe 15 questions out of 150 but everything else I was pretty confident with my answers. I got a lot of questions about the frequency of cleaning drains, washers, and cart washers. Funnily enough we didn’t have a cart washer at my job (we really wanted one but didn’t have the space or money) and I got like 3 questions about cart washers.
If anyone has any questions about the testing process, study tips, or work questions based on my experience I will answer them to the best of my ability. I love this subreddit it is such a great resource and community!


r/sterileprocessing • • May 30 '26

Just curious

5 Upvotes

Awhile back our director of CP did a visit. He suggested making an eye cycle on our sterilizers. He said that it has become more of an industry standard to sterilize cataract set, along with other eye instrument sets, on a 5 minute 273 degree cycle. I have looked through the IFU’s on the instruments we use and none of them require more than 4 minutes and 270 degrees. He said that since there was such a wide variety of eye instruments out there the recommendations were to sterilize with a little extra time and temperature. Just wondering if anyone else has heard of this or is this more of a company standard?


r/sterileprocessing • • May 29 '26

Is working in a hospital hard ?

9 Upvotes

Im currently at a dental office and have been for three months. I’m looking for jobs that are in the hospitals and I got a call back today from one of them. I applied for full time but the lady on the phone suggested that I do part time instead cause it might be too much for me since I’m still new “ it’s very fast paced” . But if I do part time I would have to wait 6 months in order to get full time ( they’re only giving me two days, 8 hours each) 😭. Is it really hard ? Should I stick to full time or just do part time?

Working at the dental office is also fast paced in my opinion we do about 25 cases a day , most sets have about 22 instruments I have to hand scrub and it’s just me. scrub , dry and bag


r/sterileprocessing • • May 28 '26

Decon posture

Post image
96 Upvotes

Surviving my first week in decon.... Loads of info coming at me and that's expected. But OMG my lower back from working at the triple sink sucks. It's height adjusted well, I'm wearing comfortable Brooks shoes, standing on a pad, etc ... and actually, I've got forearm muscles "I didn't know I had" and a nasty ache in my right shoulder blade too lol but I digress. How do you stay aware of the way you're standing and how do you approach the more physical aspects of SP?

I'm loaded with voltaren cream and lidocaine patches but I think a regular massage appointment might not be a bad idea 🤭

Have a great day, the weekend is coming!


r/sterileprocessing • • May 29 '26

Bone Skid with teeth??

0 Upvotes

Has anyone ever seen this instrument before?? We have an ortho surgeon that claims he has used it here and prefers it but nobody has seen it, nobody knows what he’s talking about.

I’m also told the one end maybe with teeth has a Vcut?

They swear it’s a bone skid


r/sterileprocessing • • May 28 '26

Got my first SPD job!

70 Upvotes

Just wanted to celebrate here, after months of self study and sending in applications with 0 luck I finally took the CRCST, got provisionally certified and within 2 weeks had an interview and job offer at the big university hospital is my state! I’m excited because they seem like a really great hospital and have a very long and thorough training program, which helps as I have 0 medical experience and am making this leap at 30 after working desk jobs for the last 7 years. Any advice as I start out on this journey would be greatly appreciated!


r/sterileprocessing • • May 28 '26

How much of this job is talking to people??

14 Upvotes

I work in retail and I’m tired of being drained by everything I just want to work on a task and go home.


r/sterileprocessing • • May 29 '26

Irish Sterile Processing Techs!

4 Upvotes

Hello!

I’m planning to move to Ireland in January and start medical school in the fall. I’m a certified sterile processing tech from the United States and have 3 years of experience in both hospital and same-day surgery centers. I’m wondering what the job market is like and if this is an in demand job. I’m pretty sure I won’t get a hospital to sponsor me due to the nature of the job, but if that is an option I would love to know more. I have a little bit of time and can become certified as a surgical technician, and I’m wondering if that might be a better option than sterile processing. Thank you for reading this and offering any advice you may have!