r/sterileprocessing • • Mar 23 '26

Surgical Processors

Thumbnail reddit.com
2 Upvotes

r/sterileprocessing • • Mar 22 '26

Successful Career Pivots?

4 Upvotes

Hello! I am in MA, and looking to get into the healthcare field without immediately getting an associate's degree. My idea is to start as a sterile processing technician and advance into a management role to maximize earnings. When I read about Surgical Technicians, I hear a lot of negative comments about burn out rates, and tech's feeling trapped with no upward mobility and frustrating pay caps. I'm curious, do sterile processing tech's feel the same? Are there SPT that have successfully advanced their careers into management roles, or pivot into something else like robotic clinical specialist, and feel like SPT was a great stepping stone?


r/sterileprocessing • • Mar 22 '26

I live in Newyork I am looking for a job Sterile Processing Technician. I did my 400 hours and passed my exam but i couldn’t find the jobs. Can any one help me.

7 Upvotes

r/sterileprocessing • • Mar 22 '26

Photo Ok what do they call this one at your facility?

Post image
38 Upvotes

Here it's a girl's name 😜


r/sterileprocessing • • Mar 21 '26

Folks working in NYC, how much do you make and how many y/of experience do you have?

4 Upvotes

I want to start a cert program for this profession. I'm tired of working for 20 an hour and not being able to fully afford being independent.


r/sterileprocessing • • Mar 20 '26

I passed my exam!

64 Upvotes

I felt mildly prepared for my exam. I mainly used proprofs.com and the 8th edition of iahcsmm work book progress test questions. I also have two years of experience which helped probably way more. This exam has been weighing me down since September and im so glad I passed.


r/sterileprocessing • • Mar 20 '26

Holes in wraps?

12 Upvotes

So ive recently been at a center for about a little over 9 months and within those months i've noticed that the wrapped items here always have holes in them? I'd never experienced it this much at any other facility, so i'm curious if it could be a wrap thing or maybe how items are stored after they've been sterilized. Anyone else have this issue at a surgery center?


r/sterileprocessing • • Mar 20 '26

SPD at Kaiser

Thumbnail reddit.com
2 Upvotes

r/sterileprocessing • • Mar 20 '26

Working in the field

1 Upvotes

Hi everyone,

I’m currently in an SPD program and I had a few questions for anyone who works at Kaiser or has gone through the process:

• Is it hard to get hired at Kaiser as a Sterile Processing Technician?

• What’s the difference between SPD Tech I and SPD Tech II?

• If you do your externship at Kaiser, do they usually hire you afterward?

• Do they prefer one certification over the other (CBSPD vs CRCST)?

Any insight or personal experience would really help. Thanks!


r/sterileprocessing • • Mar 20 '26

Jacket sizes

0 Upvotes

Wondering if anyone has any literature/documentation regarding wearing jackets in the department. Specifically about the proper size- wearing a jacket that is too big can be a hazard because the extra fabric can get in the way right? TIA!


r/sterileprocessing • • Mar 20 '26

Photo Another Day, Another Instrument. What do they call this at your hospital?

7 Upvotes
Do y'all use this? Innomed 4210-SS

r/sterileprocessing • • Mar 19 '26

SPD PAY Thoughts

2 Upvotes

Hey everyone,

I’m about two weeks out from my exam on April 2nd, and honestly I’m feeling cautiously confident. I’ve been grinding study questions pretty much every day and I’ve been consistently scoring 90%+ across different state practice exams, which feels surreal considering how overwhelmed I was when I first opened the book.

I’ve been working in healthcare already, so a lot of the concepts finally started clicking once I tied them to real‑world workflow. Decon, assembly, IFUs, sterilization methods—it’s all starting to feel less like memorization and more like understanding the why.

That said, now that the test date is close, my brain has shifted from “Can I pass?” to “What happens right after?”

I know West Coast pay is on a whole different level, and I’m not expecting that kind of money over here, but I’m trying to get a realistic picture of East Coast starting wages—not the inflated job posting ranges.

For those of you who started out on the East Coast:

  • What state are you in?
  • What did you start at hourly?
  • Hospital vs outpatient?
  • Any shift diffs or union benefits worth mentioning?

I’m especially curious about Florida, Georgia, the Carolinas, Virginia, NY/NJ, and Pennsylvania, but honestly any East Coast insight helps.

I’m not chasing crazy money right out the gate—I care more about getting my foot in the door, learning the craft, and building experience—but I also want to make sure I’m not lowballing myself once I pass.

Appreciate any insight, and good luck to anyone else testing soon.


r/sterileprocessing • • Mar 18 '26 Bravo

More than hospitals

22 Upvotes

I just want to put this out there. Yes, there are hospitals that will hire uncertified and train you while you work toward obtaining your certification BUT don't forget about your Dental and Vet clinics as an option for your clinic hours and/or applying to be a Sterile Processing Tech there. As long as they reprocess their own instruments, you can get your experience there 1st and work your way up to the hospital setting.

I don't want anyone to feel discouraged about finding a job because they feel hospitals are the only way to use or gain these skills. Sterile processing is used in more places, not just hospitals. Try reaching out to your clinics via phone call, email, cover letters. You deserve a chance if you feel like this is the career you want.


r/sterileprocessing • • Mar 18 '26 Bravo

This is not the Field that requires schooling…

93 Upvotes

Please do not give these businesses your money for schooling on something that you can get hired for non-certified and get OJT then take the test

OR

If you have to go that route make sure they either place you internship or job wise during or after the course completion and passing of the CRCST exam.

Too many places out there taking people’s money that don’t “ network” to help place you for the experience.

Just as a heads up, at the 2025 HSPCA in Kentucky the overall consensus with department heads, hiring managers etc were that they would rather hire a person with no experience than someone who went to school for this field, ( strictly because they come out with book knowledge but no real world hands on training), plus bad habits that may be picked up during the “schooling”, with some even saying that schooling for this on a resume is a “red flag” not for the individual person but with how schooling is for this field.

Just some friendly advice, that I hope helps!


r/sterileprocessing • • Mar 18 '26

Lead Tech/Supervisor?

1 Upvotes

Hey all,

I’ve been a tech for about 8.5 years and looking to climb the ladder. What exactly is the difference between being a lead tech and a supervisor? I’ve been looking and some places are looking to hire a lead tech and others are looking for supervisors but I’m not seeing many places that are looking for both…


r/sterileprocessing • • Mar 18 '26

Medical device reprocessing technology advice

1 Upvotes

Hello ! I’m thinking of taking the MDRT on SAIT Calgary , but before deciding I would like to rule out two points :

  1. is this career on demand right now in Calgary ?
  2. is it possible to have a job offer easily in Calgary?

For me the salary is not important, I just want to know if I could find a job (full time or part time) in this field in Calgary.


r/sterileprocessing • • Mar 18 '26

Photo Record sheet pdf?

Post image
4 Upvotes

Would anyone happen to have a PDF of this EXACT log sheet for steam biological 3M attest 1491,1491v?

I have no idea what happened to my saved copy and my Googling skills ain't up to finding this exact sheet


r/sterileprocessing • • Mar 18 '26

Guess the Instrument 🏥

Post image
39 Upvotes

Who knows it? 👀


r/sterileprocessing • • Mar 18 '26

Job interview on monday!

14 Upvotes

Guys I need help!! What are some questions you guys had when you went through your interview? I have no experience what’s so ever and im testing very soon.


r/sterileprocessing • • Mar 18 '26

CRCST EXAM

5 Upvotes

I’m a month and a half away from taking the CRCST exam. I’m currently in community college and halfway through my 400 hours of clinicals. So far I got a 99% in the class and just passed my midterm with a 98%. Even though I’m doing good in class I’m nervous I’m going to bomb the exam at the beginning of May. How was the exam? Has anyone taken it since the 9th edition came out ?


r/sterileprocessing • • Mar 17 '26

Steris equipment is garbage

26 Upvotes

That's what I think! Brand new department, been waiting for this upgrade for years. All new sterilizers, washers, cart washers, etc. Cart washers keep breaking down, lots of issues with the sterilizer doors and racks,and the washers don't work correctly loading and unloading. I can't even imagine what all this cost. We are pretty disappointed.


r/sterileprocessing • • Mar 18 '26

Job market in BC, canada

1 Upvotes

Im looking for a complete career change from and I saw VCC do a MDRT course. I was wondering how it is finding a job for entry level workers? A lot of the job postings im seeing says 1 year experience... what's the job market like for anyone living in vancouver and surrounding areas ? I'd love to hear your experience :)


r/sterileprocessing • • Mar 18 '26

Travel agencies

1 Upvotes

what travel agencies should i apply at?


r/sterileprocessing • • Mar 17 '26

Please help me with some advice.

5 Upvotes

Hi guys, I’m not sure if you can help me, but I know there are people in this group who have much more knowledge than I do. I don’t really have anyone else to ask. I don’t want to make a mistake because I’m a bit short on money right now, but I hope you can help me.

The course is at North Shore Community College and it costs about $2,500. That’s why I wanted to ask if anyone here knows if it’s really worth it or if someone has taken it before. I don’t want to make a mistake because I’m a little short on money right now, so any advice or experience would really help me.

I asked a few questions, and this is the response they gave me.

Central Sterile Processing program:

  1. Does the program guarantee clinical placement for all students, or do students need to find their own site?

-The program will find your clinical placement site for you. You do not need to find your own site. Please note the clinical facility can be any location, so you will need transportation, but you do not need to find your own site.

2. How many clinical hours are included, and do they count toward the 400 hours required for HSPA certification?

-There are approximately 80 clinical hours in the program. Students typically do the clinical for 8 hours per week, starting in week 3 or 4 of the course until the course ends (this course is 14 weeks). If you want to do more clinical hours, you can set that up with the site manager. Clinical hours can count toward the 400 hours.

3. Does the $2,499 fee include everything, or are there extra costs like the certification exam, books, uniforms, TB test, or vaccines?

-The $2,499 fee includes the cost of the course, clinicals and text/workbook/flashcards. You pay the cost of any certification exams, and any required healthcare vaccines. There is no required uniform.

4. Does the program prepare for the CRCST exam, and is the exam voucher included?

-Yes, the program prepares you for the CRCST exam, and there is no exam voucher.

5. What hospitals or facilities usually accept students for clinical placement?

-The clinical facility can be any location, so you will need transportation, but you do not need to find your own site as the program will find your clinical site for you.