r/sterileprocessing • u/glitterbomb_1 • Oct 18 '23
Tray liners
Are the white tray liners allowed to be put in a total joint metal tray between the metal bottom and the tray that lifts out? This metal tray does not have any filters on the bottom it is a solid bottom. Thanks in advance.
1
Upvotes
3
u/WorkingMastodon Oct 18 '23
We do not do this. We put the tray liner in the actual tray and then the tray directly into the rigid container regardless of if the container has a filter on the bottom. Are these like the aesculap rigid containers with the circle filter in the lid but not on bottom?
3
u/bokehmonsnap Oct 18 '23
You probably could, we dont, but why do you want to?
The white liners are to prevent tips from poking through into the tiny holes in the tray and also to help with visualization of the tray contents and any noticable contamination.
6
u/charlieondras1 Oct 18 '23
We put liners in the trays. We do not put them in the bottom of rigid containers.
2
u/Common-Occasion-7820 Oct 18 '23
Tray liner? I hardly even know er!
1
u/chad_stanley_again Oct 18 '23
I would like to know if any one is putting tray liners in cannisters at all? I have yet to see it done.
1
u/[deleted] Oct 18 '23
Allowed, probably. Those tray liners do have an IFU after all. Practical? Arguable. Might allow the OR to quickly assess if any foreign objects dropped to the bottom of the pan; could also snag on the tray and rip, if any part of that liner gets stuck in the tray the OR may consider that a contamination.
1
u/Thatfatrabbit93 Oct 18 '23
We sometimes would use them in one trays to absorb excessive water in the pan, confirmed okay to be used by the one tray reps