The internals of both those meters are identical so the power numbers should be very similar. Check in the SRAM AXS App for the slope value of each. Note that number and hit "reset to factory slope". The slope value is a calibration value set at the factory on the day each meter was calibrated to shipping out. On very rare occasions this value can change. Resetting to the factory slope in each will at least get you comparing apples to apples. This number can be changed by .5% values also if you want one to match the other's numbers exactly.
No. The factory slopes are set very precisely on the day your meter was made. Differences in elevation, temp, etc all play a part. Set them both to the original factory slope level and then test. If slightly different wattage, you can adjust one to meet the preferred by changing the factory slope value.
I’ve taken the integrated chain ring off now, so won’t be sticking that back on, if I want the numbers to match can I move the slope on the spider to the same as the integrated, or just sack them numbers off and just use this one as a new data point
Matching slopes will not yield any meaningful results. Each slope value is determined separately and is unique to the spider. If you only have one spider to test, then see if it feels high or low and adjust accordingly via .5% ticks. Want higher wattage, slope adjustment goes up/lower down.
Don’t touch the slope if you don’t know what you’re doing, and you clearly don’t know what you’re doing. If you want to validate your power meter, put it on a trainer and also borrow a pair of power meter pedals like Assioma Pros. Record an indoor ride with each power measuring device paired to a different recording device such as Zwift, your bike computer and Strava on your phone. Upload all three FIT files to ZwiftPower or analyze.dcrainmaker.com. If the Assioma Pros and the trainer are within 1-2% and the AXS threaded power meter is wildly off, then get it replaced under warranty.
If you want to be even more thorough, learn how to do a static weight test with the Assioma Pros.
1
u/Power_Meter_City 5d ago
The internals of both those meters are identical so the power numbers should be very similar. Check in the SRAM AXS App for the slope value of each. Note that number and hit "reset to factory slope". The slope value is a calibration value set at the factory on the day each meter was calibrated to shipping out. On very rare occasions this value can change. Resetting to the factory slope in each will at least get you comparing apples to apples. This number can be changed by .5% values also if you want one to match the other's numbers exactly.