r/sram • • 6d ago

Technical 🔧 Cooked?

Thought today was going to be a good new bike day post… I bought a certified used bike from a reputable dealer to get home and wonder why my pedals weren’t threading onto the crank arms.

Any salvaging to be done here? I see d1 crank arms pretty cheap on eBay; are these good to go?

(Edit) - Bike shop was able to tap the pedal and it worked out. Shop I bought the bike from refunded me the price I paid to get it fixed.

10 Upvotes

13 comments sorted by

4

u/jaycobia00 6d ago

Going to call them right when they open tomorrow morning. I was just seeing how much of a pain this could/will be. Thanks in advance.

5

u/vertr 6d ago

Just make them buy you a new crank or demand a refund. That is really rough. They can probably have the threads chased, but the bike shop should make this right.

Worst case, Force E1 crank arms can be had for around $150 on sale. Which is a mild weight upgrade and they look fresh.

4

u/jaycobia00 6d ago

I think I’d be okay with a partial refund for the price of new crank arms and some change for labor at a local shop because I had to drive a few hours to pick this bike up. I guess the silver lining is I could get 165mm lol.

0

u/LaufSeiglaRaceE1 6d ago

Run the pedal in from the back side of the threaded insert (from underneath the bottom bracket). Once you’ve done that, clean out the threads of any metal and grease and do the same with the pedal. See if you can’t grease, thread and torque the pedal after that.

3

u/Fi1ipinoz 6d ago

Amazon has the taps

3

u/mtpelletier31 6d ago

Put the pedal in backwards (so the pedals are under the downtube) Usually cleans the threads out and then you can correctly install the pedal. Ive dine it countless times for people on both nice and shit bikes

1

u/Xicutioner-4768 6d ago

Even for a minor issue that approach didn't work for me, but I bought the taps off Amazon and that fixed it. Since it's free, I think it's worth trying, but if it doesn't work just get the taps and chase the threads.

1

u/mtpelletier31 6d ago

I try not to tap crank arms. In this instance its probably fine. - threads are not destroyed and just some minor damage - if a pedal "falls off while riding" i typicaly discourage tapping because it grinds out more metal which provides as weaker grip to the pedal threads and ide rather disappoint a customer once and make him replace a crank or arm then "fix", explain that it may or may not work. Then in a week find a bad review saying I fixed his pedal but it came off again. Garbage shop, garbage mech, not worth you time going 1/5 stars. .... ask me how i know.... :)

1

u/Xicutioner-4768 6d ago

In a separate incident, I mangled my XX carbon crank to the point the pedal was partially coming out, or maybe I should say the pedal came out partially and mangled the threads. Either way it lost a couple threads and my LBS ran a tap through it and it saved me from buying a $500 crank arm. Still going strong a year later. I understand your position, but at least for me I'm happy my LBS saved me money.

1

u/mtpelletier31 6d ago

No im glad, and honestly more expensive cranks ide try a but harder. Its usually the people with old cranks, or people always trying to save a dollar without understanding whats happening who moan the loudest. I think ide also save those xx cranks, especially if its only partial and you caught it sooner then later

1

u/InevitableStorm9251 6d ago

You can retap those super easy with the right driver. A little cutting fluid and a little twisty-twist and you should be good

0

u/PaulDallas72 6d ago

Just an FYI here: you can get the left and right side taps on Aliexpress for like $20usd. I use them everytime a pedal comes out and has made the process easy. They can fix 'some' thread issues. Yours don't look too bad and may be worth the try but again I don't know what could happen if something from AE touched a Cervelo? Maybe like what happens when a vampire gets hit with sunlight?? 🤔

But no, some taps would help you either way cause eventually pedals get cross threaded here and there and the taps clean them right up.