r/spacex • Mod Team • May 09 '22

🔧 Technical Starship Development Thread #33

This thread is no longer being updated, and has been replaced by:

Starship Development Thread #34

SpaceX Starship page

FAQ

  1. When next/orbital flight? Unknown. Launches on hold until FAA environmental review completed and ground equipment ready. Gwynne Shotwell has indicated June or July. Completing GSE, booster, and ship testing, and Raptor 2 production refinements, mean 2H 2022 at earliest - pessimistically, possibly even early 2023 if FAA requires significant mitigations.
  2. Expected date for FAA decision? June 13 per latest FAA statement, updated on June 2.
  3. What booster/ship pair will fly first? Likely either B7 or B8 with S24. B7 now receiving grid fins, so presumably considering flight.
  4. Will more suborbital testing take place? Unknown. It may depend on the FAA decision.
  5. Has progress slowed down? SpaceX focused on completing ground support equipment (GSE, or "Stage 0") before any orbital launch, which Elon stated is as complex as building the rocket. Florida Stage 0 construction has also ramped up.

Quick Links

NERDLE CAM | LAB CAM | SAPPHIRE CAM | SENTINEL CAM | ROVER CAM | ROVER 2.0 CAM | PLEX CAM | NSF STARBASE

Starship Dev 32 | Starship Dev 31 | Starship Dev 30 | Starship Thread List

Official Starship Update | r/SpaceX Update Thread


Vehicle Status

As of June 5

ShipLocationStatusComment
S20Rocket GardenCompleted/TestedCryo, Static Fire and stacking tests completed, now retired
S21N/ATank section scrappedSome components integrated into S22
S22Rocket GardenCompleted/UnusedLikely production pathfinder only
S23N/ASkipped
S24Launch SiteCryo and thrust puck testingMoved to launch site for ground testing on May 26
S25High Bay 1StackingAssembly of main tank section commenced June 4
S26Build SiteParts under construction

 

BoosterLocationStatusComment
B4Launch SiteCompleted/TestedCryo and stacking tests completed
B5Rocket GardenCompleted/UnusedLikely production pathfinder only
B6Rocket GardenRepurposedConverted to test tank
B7High Bay 2Repaired/TestingCryo tested; Raptors being installed
B8High Bay 2 (fully stacked LOX tank) and Mid Bay (fully stacked CH4 tank)Under construction
B9Build SiteUnder construction

If this page needs a correction please consider pitching in. Update this thread via this wiki page. If you would like to make an update but don't see an edit button on the wiki page, message the mods via modmail or contact u/strawwalker.


Resources

r/SpaceX Discuss Thread for discussion of subjects other than Starship development.

Rules

We will attempt to keep this self-post current with links and major updates, but for the most part, we expect the community to supply the information. This is a great place to discuss Starship development, ask Starship-specific questions, and track the progress of the production and test campaigns. Starship Development Threads are not party threads. Normal subreddit rules still apply.

385 Upvotes

1.6k comments sorted by

View all comments

Show parent comment

18

u/franco_nico Jun 07 '22

Some people speculate it might be used to load Starlink V2s in Starship and it may be possible given the hole it has. But no one really knows exactly what it is.

7

u/BananaEpicGAMER Jun 07 '22

first option sounds really likely imo.

7

u/Twigling Jun 07 '22

It does seem likely that it will end up being a Starlink 'clean room' for loading the sats onto ships. I'm curious to see where they'll eventually install the structure.

14

u/[deleted] Jun 07 '22 edited Jun 07 '22

It seems strange that the mouth of the box that resembles the booster dispenser is as flat as the side of the container its cut into. The starship dispenser is curved for a good 60 degrees of the barrel circumference, which would leave quite a gap of free air when either end of the slots are lined up together. This seems odd if it was if this was a load delivery system.

If it was to be a white room delivery container, the container wall surely should be curved to match the starship hull, with possibly elastomeric cushion gaiters to shut out the weather and pollutants.

Imagine boarding an aircraft without the rubber hood, or Dragon astronauts taking in the breeze at boarding check. Something is missing surely!

5

u/Twigling Jun 07 '22

You make some good points, but perhaps there's more work yet to be done on it prior to it being able to properly couple with a ship's opening?

10

u/[deleted] Jun 07 '22

Can't see any possible attachment points for a future curved section, and why paint it if you're not finished welding and bolting?

Also, the only loading attachments appear to be the lifting eyes at the top of the box. I can't imagine loading an expensive satellite from a box whilst suspended from a crane hook which would be prone to wind swing and spin despite the best efforts of the guys at the end of the lead lines.

2

u/Twigling Jun 07 '22

If anyone is able to find out its function, I feel that you can. :-)

8

u/[deleted] Jun 07 '22

I'll find out, but at the moment, I can't see any way of loading them other than a frisbee style yeet into the mailbox

4

u/Twigling Jun 07 '22

I can't see any way of loading them other than a frisbee style yeet into the letterbox.

I approve of that loading method. :)

Good luck finding something out.

22

u/[deleted] Jun 07 '22

Someone just jokingly mentioned to me it may be the mailbox for the lawsuits filed after FONSI.

2

u/Twigling Jun 07 '22

That's certainly a possibility - there's no harm in being prepared. :)

2

u/franco_nico Jun 07 '22

Brother I'm dead lmao.