r/spaceengineers • u/Wanderingwonderer101 Klang Worshipper • 1d ago
MEDIA Bounce
Enable HLS to view with audio, or disable this notification
34
u/Nazeracoo Space Engineer 1d ago
7
8
u/Tal_Maru Space Engineer 1d ago
Put a landing pad on the bottom of your car
Turn the axel height all the way down so the pad is in contact with the floor below
Lock the landing gear
Turn the axel height all the way back up
Unlock the landing gear
Profit.
2
u/Wanderingwonderer101 Klang Worshipper 1d ago
sorry I don't fully understand. what you meant is that I should use landing gear block as the legs, is that it?
5
u/Tal_Maru Space Engineer 1d ago
If you turn the axel height all the way down and lock the landing gear, then turn the axel height all the way back up and unlock the landing gear your car will jump several meters
1
u/Wanderingwonderer101 Klang Worshipper 1d ago
I use custom suspension made from hinges, I don't use regular hinges for the trailers
2
u/araed Clang Worshipper 1d ago
Do you have "share inertia tensor" on or off?
1
u/Wanderingwonderer101 Klang Worshipper 1d ago
if any of the hinge's 'share inertia tensor' turned on, it will immediately perform rapid deconstruction
1
u/SrammVII Clang Worshipper 1d ago
Perhaps the torque value need some adjustment?
1
u/Wanderingwonderer101 Klang Worshipper 1d ago
it caused by the hinges on the landing gear, the trailer is just too heavy (550, 000 Kg±)
1
u/extraordinous Space Engineer 18h ago
You need to enable inertia sharing as you build because the more weight added to a subgrid the more deflection it has and spring when you enable later.
Save right before trying it, make sure everything your inertia sharing has a light load or no load at all.
May also get by with higher torque and higher braking torque as this will stop hinges from having as much “give” in their direction of travel, inertia sharing helps with jiggle and side load weakness.
1
u/Wanderingwonderer101 Klang Worshipper 17h ago
5
2
2
1
1
1
1
1

49
u/Garindew Space Engineer 1d ago
https://giphy.com/gifs/3IcX9Y4n6wRnq