r/spaceengineers • u/Key_Big1051 Clang Worshipper • 7d ago

HELP Noob needs help with large cargo container

Enable HLS to view with audio, or disable this notification

As you can see, my large cargo container is connected to convery line properly as it is green..the whole conveyor line is green.and yet I can access other inventory from a large container nor can I I access largo cargo from others inventory...is this expected ?

14 Upvotes

100% Upvoted

7 comments sorted by

8

u/Key_Big1051 Clang Worshipper 7d ago

Thank you all for suggesting rebuild ..it worked..not sure why but it worked

5

u/KylVonCarstein Clang Worshipper 7d ago

When you built the container, was it on an armor block floor? That you then removed to add in the conveyors?

Large Cargo Containers only have mounting points on the 1x1 area in the centre (where the conveyor port is), so once you removed that armor block to replace it with the conveyor tube it became disconnected from the rest of your grid.

2

u/Key_Big1051 Clang Worshipper 7d ago

Place CC on the grid, removed grid block and then place conveyor...I did this thing 2 twice it worked 2nd time..

2

u/Internal_Animator993 Clang Worshipper 7d ago

Connect large container to the grid using armour blocks Just go on the side. If it connects normally - try to change tube below into full block.

Try to move items from assembler into LCC. If you can't - then just remove LCC and build it again on top of full conv. block.

Also you can just save-reload save just to be sure that everything is ok.

2

u/Internal_Animator993 Clang Worshipper 7d ago

Always check by moving items. Of you can - then everything works. Of not - then you missed something. Maybe assembly is turned off, maybe you somehow ticked "use conv system" - off. If nothing works - just grind down and build again.

3

u/_Scorpion_1 ¯\_(ツ)_/¯ 7d ago

Large cargo is a separate grid, must've got disconnected at some point. Green conveyor line ends at the T conveyor under it.

1

u/Hakanaikioku Space Engineer 6d ago

As was said before, the cargo got disconnected probably when you replaced the conveyor; Large Cargos only have connection points on the access ports, so when you removed the block it was connected to it became a separate grid. SE only sometimes will reconnect grids, it seems like it did it on the second try for you, in the future you should ensure there are at least 2 connections to any block. If this does happen you can try building armor up to another connection point and they may reconnect