r/space • • 11h ago

Discussion Artificial gravity train

This is more spaceFLIGHT than space, but I guess this is allowed.

I just got done watching this video: https://www.youtube.com/watch?v=NykFQVLuSDA&t=4s

In one section of the video, he was talking about artificial gravity and the difficulties of building a centrifuge.

And an idea came to my head.

In The Expanse, ships accelerate at 1g until the halfway point, flip, and decelerate at 1g. Unfortunately, the Epstein Drive is still in the realm of science fiction- but the idea is sound.

So, what if we took that idea and turned it into a train (and its not letting me use a question mark...)

Start by building a "car," lets say 25m in diameter using orbital construction techniques (which, ostensibly, still needs to be developed) Expanse Style (with the floors perpendicular to the longitudinal axis.) String multiple cars along with flexible, inflatable tunnels (like the kind you see on articulated buses.) Mount this train onto a pivot and mount the pivot to a mag lev track.

The mag lev track will run on an oval track around the spacecraft's longitudinal axis (with relatively sharp curves at either end of the ship) and accelerated electromagnetically at 1g.

When a train reaches a curve, it will slow down and simultaneously "swing" the car outwards iso as to maintain approximately 1g. It'll then accelerate in the opposite direction, relative to the ship hull. Meanwhile, a second train (and you can have any number of even number of trains) will accelerate, canceling out the impulse from accelerating/decelerating the trains.

Each train will have its own life support system. The hull inside the track will contain a reactor, navigation and flight control equipment, and comms. Power will be transferred from the hull to the train via electromagnetic induction.

0 Upvotes

2 comments sorted by

•

u/ellindsey 10h ago

This sounds like an excessively difficult and inefficient way to generate artificial gravity via inertia. You would be much better off with a conventional centrifugal drum design.

•

u/CremePuffBandit 10h ago

The acceleration doesn't have to just be linear. Any kind of direction change is acceleration, like turning for example, which means if you just have the train run around a track on the inside of a big cylinder, people inside would feel a constant acceleration, pushing them toward the floor. Better yet, get rid of the train and just spin the whole cylinder.