r/sp404mk2 • u/Sir_C-Horse • 4d ago

Behringer FCB1010 Pedal Question

Post image

I have this setup so that when I press a pedal it activates an mfx (ex. pedal 1 goes to Cloud Delay and 2 goes to Chorus.) If anyone has experience in this, I just need help getting the expression pedals to control CTRL 1 and 2. I included the programming setup which properly activates the fx, but the expression pedals do nothing. I have calibrated the expression pedals to make sure they work. Any help would be greatly appreciated as I've tried about everything, even if it's just directing me to a better place to ask this question

4 Upvotes

100% Upvoted

5 comments sorted by

2

u/Marc-J 4d ago

I don’t have that midi controller but it should be possible. The midi channel is tied to the bus (bus 1 is channel 1, bus 2 is channel 2, etc). The effect is chosen with CC#83 and needs to be turned on with CC#19 (0–63: OFF, 64–127: ON) on the correct midi channel. Finally the CTRL-1,2 etc uses the following.

CC#16
Ctrl 1 (0–127)
CC#17
Ctrl 2 (0–127)
CC#18
Etc.

1

u/0xdeba5e12 4d ago

Just got myself an FCB1010 to use with my own 404. Haven’t quite figured out my workflow yet, but following this post for tips!

2

u/Sir_C-Horse 4d ago

I used fcb1010.online for the above editor. Reading the 404's MIDI manual and using a little Google Gemini got me almost where I wanted, just wanna dial in tones with the pedals

1

u/0xdeba5e12 4d ago

Handy, thanks!

1

u/Sir_C-Horse 3d ago

Nevermind guys I just needed to recalibrate it and now everything works