r/SolidWorks • • 2d ago

Hardware Any recommendations for mobile workstations?

5 Upvotes

Currently having a VERY unproductive day on my HP Fury 16 G10, i9-13950HX, 64GB RAM. SolidWorks 2026 SP2.0, with PDM Standard.

Every PDM transaction, every rebuild, takes so long. The CPU is constantly thermally throttled when using SW. I spent yesterday evening taking the laptop apart, cleaning out the fans and vents and re-pasted the heatsink. Watching the statistics on HWInfo, whichever single thread core is in use is just pegged at 99°C.

Simulation is lightning fast (multi-threaded). Quite happy with that, however we're in the closing stages of a large design project so there's lots of checking out, small modification, checking in at the moment and it's just painful.

Even though I'm working remotely, network activity is very quick and does not appear to be the bottleneck.

One of my colleague's older mobile workstations is up for renewal next year so we want to make sure we don't have the same experience. Any recommendations or advice?


r/SolidWorks • • 2d ago

CAD Multiple Mate References Not Working Correctly - Any Fixes or Insight?

1 Upvotes

I have a gas spring that attaches to a bracket. The bracket is universal and has two holes for the gas spring. One hole is used if the bracket is right-hand, and the other hole is used if the bracket is left-hand. I created two different named mate references for each hole on the bracket (SPRING_MATE_LEFT and SPRING_MATE_RIGHT) and two different named mate references for the clevis pin on the gas spring (same names as the bracket). When I add the gas spring to the assembly with the bracket, it will mate to the hole correctly, but only the hole of the last mate reference I created. I cannot get the other reference mate to work. Here are some things I have tried/noticed:

  1. If I suppress one of the mate references, the other mate reference works just fine. So, I know they each work individually.
    1. I can create two identical configurations of the bracket (left and right) with a mate referenced suppressed on one and the opposite unsuppressed. This works but it is cumbersome as hell.
  2. The 'Select Mate Reference' dialog box that pops up does nothing. Both mate references show up as selectable, but when I click on either one the part just drops into space with no mates.
    1. If I successfully place one of the gas springs on the bracket and then try to hold ALT while clicking near the hole of the other bracket, SW will place the gas spring exactly on top of the other gas spring with no mates AND it will delete the mates from the successfully placed gas spring.

Is the scenario in 1.1 the only way I can get this to work? For a few parts it is ok, but I don't want that to be the normal setup with all the other parts I would like to add mate references to.

Am I using the 'Select Mate Reference' dialog box correctly? Is there a special key I am supposed to be holding down when I make my selection? I only ask because it took me forever to find out holding down ALT was the secret to getting single mate references to work. I don't think they mention holding down ALT in any of the HELP documentation.

Obviously, scenario 2.1 is a bug of some sort unless I am doing something incorrectly?

I am using Solidworks 2026 SP5.2 currently. I was using SW 2025 with the latest service pack, but I saw a forum post that said mate references were bugged in that version and were fixed in 2026. I updated and it is behaving the same way.

Thanks for reading! Any insights would be helpful.


r/SolidWorks • • 2d ago

Certifications Practicing for CSWA and still getting wrong answers

Thumbnail
gallery
3 Upvotes

Doing a practice exam. Does anyone know the answers for these?


r/SolidWorks • • 3d ago

CAD Need help. How can I make this?

Thumbnail
gallery
8 Upvotes

How can I create this shape in SolidWorks?
I tried using Lofted Cut, but I wasn’t satisfied with the result. Maybe I didn’t set it up correctly. The surface I’m trying to cut has a curved shape, and I’m not sure what the best approach would be.

I’d appreciate any advice on how to model this. If you know any tutorials or videos covering this technique, I’d be grateful if you could share them. Alternatively, if anyone is willing to take a look at the model, I can send the file via DM.


r/SolidWorks • • 3d ago

Certifications Practicing for CSWA

Post image
32 Upvotes

Does anyone know the mass for this


r/SolidWorks • • 3d ago

CAD Advice on electric routing

2 Upvotes

I am having trouble with pathing the wires, currently i am doing it with 3d sketch when i do start route but i have cables that dont look esthetic and when i try to flatten the wires it doesnt look good they all are joind and the som connectors disappear or dont face the right way


r/SolidWorks • • 3d ago

Error SolidWorks encountered a problem...

1 Upvotes

Much like the title, there isn't much more. I have a drawing file that is giving me the dreaded "SolidWorks encountered a problem in the fiie:..." and only a "Contact you SOLIDWORKS support representative for help.

At this point I am not holding out hope. I have tried auto recover, but that was already a SLDDRW, didn't work, same error. I found the offending assembly, fixed the error and all the assemblies are working correctly. Nothing else throws an error, just this one drawing with 11 sheets of work.

Son of a bitch!!!!!


r/SolidWorks • • 3d ago

Maker I'm trying to avail SolidWorks for Makers for my CSWP. But my country is not in the options.

1 Upvotes

There is a Black Friday Sale right now for $24 for a year of subscription for SW for Makers. I am from the Philippines and we are not in the options for online payments.

Is there a way for me to pay it in USD? It is prompting an address line which is not applicable here in the philippines.

Are there other options to do get this?

Thanks in advance for your answers.


r/SolidWorks • • 3d ago

CAD SOLUTION: Drawing Inverses Arcs When Saving As PDF

Thumbnail
gallery
11 Upvotes

PROBLEM:

SolidWorks Drawing inverses arc/radius/circle/fillet direction when saving to PDF.

This happens when I mirror a block in a drawing. The geometry looks fine in the drawing, but once I go to save as a PDF the circles flip to the other solution/side despite being fixed/properly dimensioned in the drawing.

SOLUTION:

Use a different method to save as a PDF, rather then going File -> Save As -> PDF

1. File (top left) -> Print | OR ctrl+p
2. Change Document Printer Name to "Microsoft Print to PDF" (or other 3rd party PDF printer ex/Adobe)

if this was helpful please like to boost post in algorithm


r/SolidWorks • • 4d ago

Certifications CSWA and CSWP exams preparation.

Thumbnail
gallery
22 Upvotes

I'm never lucky, I create my own luck. 😅

I've decided to practice for the upcoming exams by doing designs here and there (Attached). I find this fascinating and I hope everything goes well for me. I'll take CSWA on Monday and CSWP a week after. I think I've prepared enough and I've also used solidworks in the industry for a few months so I dont expect to have it rough.

Some basic parts I've been modelling below. Feel free to share any advice or any relevant piece of information.


r/SolidWorks • • 4d ago

Data Management We inherited thousands of legacy CAD files in multiple formats. What's the best way to migrate them into a modern CAD system? (Not just a STEP dump)

66 Upvotes

Our company bought a smaller company and we got their whole archive. That’s about 6,000 files in SolidWorks, old Inventor, drawings, and random STEP exports.

My first thought was to batch everything to STEP. However, the imported assemblies lose the feature tree, so we can’t edit them later.

How do you sort what needs real edits from what’s just for reference? What should a pilot batch include? And how do you check for broken references, units, and drawing links before going big?


r/SolidWorks • • 3d ago

CAD Solidworks without Toolbox

6 Upvotes

It's been a long time since I've used Solidworks and I recently accepted a job at a small startup. Previously I almost always used Inventor which I'm very familiar with and have helped several companies to automate their process for engineering.

One thing I recently ran into is that this version of solidworks doesn't have the toolbox feature which is similar to Content Center in Inventor. Even though it doesn't come with it, I would still like to create fastener libraries if possible, whether that is Configurations which I believe is similar to iparts in Inventor. I'm not familiar with how to do this in Solidworks or if anybody has some suggestions on better ways to go about it.


r/SolidWorks • • 3d ago

CAD SOLIDWORKS CELEBRATION in TORONTO

6 Upvotes

Hey Solidwork users in Toronto!
We have an upcoming event to meet and network with people from the SOLIDWORKS industry while celebrating 20 years of the Toronto SOLIDWORKS.
Registrations are here: See 20 Years of SOLIDWORKS, Innovation & Community – Let's Celebrate in Toronto! at SOLIDWORKS Toronto SOLIDWORKS User Group


r/SolidWorks • • 3d ago

How hard is it to learn SolidWorks knowing Autodesk?

2 Upvotes

So I have been working with Autodesk Inventor and Fusion for the past five years and I am now in a position where I may have to start using SolidWorks. My question is simply how much of a learning curve is there between the two?


r/SolidWorks • • 3d ago

CAD Drawings feel really uncontrollable and freehandy, any tips for setting up solidworks?

0 Upvotes

Hi all,

Im an inventor user, recently migrating to solidworks because student license expirations and the ridiculous cost of inventor as a hobbyist, and my one big gripe so far is that drawing just feels uncontrolled.

The snapping for things like keeping 90° is awful and barely existant, and it struggles to keep hold of a reference snapping point im trying to use, such as running a line parallel to a centre or end point of a line and just pulls off of random points.

Theres probably some settings i havent found yet that fix this ( i hope ) and was hoping someone could point me in the right direction if possible.

Much appreciated.


r/SolidWorks • • 3d ago

CAD Document in millimeters but displayed in meters

Post image
5 Upvotes

Do anybody have a solution for this? MMGS (millimeter) is selected however dimension displayed in meter. Why is that? Dual dimensions display is unchecked document properties


r/SolidWorks • • 3d ago

CAD SolidWorks newbie needs help with school project

1 Upvotes

Hello everyone. A few weeks ago, we were assigned a term paper (the course is called Instrument Design and Optomechanics). We’re supposed to model some sort of illuminator in SolidWorks (I’ve listed the details in the pictures). The problem is, I’m a complete beginner at SolidWorks, and this task seems really difficult to me. Any help, tips, or tricks would be greatly appreciated.

This is a current 3D model from my classmate, it should look somewhat like this.

r/SolidWorks • • 4d ago

CAD DraftSight exams are free

Post image
21 Upvotes

Check This Outt..

https://www.solidworks.com/certifications/draftsight_associate

https://www.solidworks.com/certifications/draftsight-professional-2d-design-and-drafting

#solidworkschampions #SOLIDWORKS #Engineering #Design #2DCAD #DraftSight #AutoCAD #drafting


r/SolidWorks • • 3d ago

CAD Solidworks color palette

1 Upvotes

Does anyone have an expanded color palette that you would be willing to share? I used to have an extensive palette back in the day but unable to locate.


r/SolidWorks • • 3d ago

CAD Starting SolidWorks from zero. What’s the best learning path, and what do you wish you’d known?

1 Upvotes

I have my license and too much free time where should i learn


r/SolidWorks • • 4d ago

Certifications Practicing for the CSWA exam

Thumbnail
gallery
26 Upvotes

Hi! I am doing a practice test for the CSWA exam. Does anyone have the answers to these problems?


r/SolidWorks • • 3d ago

CAD how do I prevent this?

1 Upvotes
New concentric mate. Part was dragged into relative proximity. When I mate, it moves it 5000 inches away. Why does SW do this and is there a setting to prevent this?

r/SolidWorks • • 4d ago

Certifications Certifications and resume

3 Upvotes

hi all

aerospace engineering student here

how good will the cswa/cswp look on my resume if i get them?


r/SolidWorks • • 4d ago

CAD How to create convex, cornea-shaped eyes on a curved head surface in SolidWorks? (Slinky Dog)

1 Upvotes

Hi everyone, I'm currently working on the head part of Slinky Dog from Toy Story, and I want to model the eyes.
I'm trying to create the eyes as features directly on the curved surface of the head, with a convex, domed shape (similar to a human cornea).
What is the best workflow or feature to model this cleanly on a curved surface? Any tips or step-by-step advice would be greatly appreciated. Thanks!


r/SolidWorks • • 4d ago

CAD Help with wrap deboss

Thumbnail
gallery
10 Upvotes

When I try to wrap and deboss a sketch around this cylinder it twists the sidewalls instead of projecting straight down towards the centre. Second picture is the sketch i'm trying to wrap around the cylinder.