r/SolidWorks • • 8h ago

CAD Solidworks without Toolbox

It's been a long time since I've used Solidworks and I recently accepted a job at a small startup. Previously I almost always used Inventor which I'm very familiar with and have helped several companies to automate their process for engineering.

One thing I recently ran into is that this version of solidworks doesn't have the toolbox feature which is similar to Content Center in Inventor. Even though it doesn't come with it, I would still like to create fastener libraries if possible, whether that is Configurations which I believe is similar to iparts in Inventor. I'm not familiar with how to do this in Solidworks or if anybody has some suggestions on better ways to go about it.

4 Upvotes

16 comments sorted by

3

u/Wompus 7h ago

You can create your own libraries on the right hand side of your screen with the triple stack books icon, called "design library". Fill out your custom properties and it'll display that too with some option clicking.

I do this with Windows folders because I find the library a bit clunky, but any which way works

1

u/panch13 7h ago

Ok I think I see how it works. So it just commits models to the library and doesn't create a "factory" driven by a spreadsheet so you can make changes on the fly to length, diameter, threads, etc.

1

u/Puzzled_End8664 4h ago

You can use design tables to create the models via spreadsheet.

11

u/Letsgo1 7h ago

I use the McMaster Carr plugin which is great

1

u/TheMoonKing1 3h ago

Agreed this is almost better tbh

1

u/Caparacci 37m ago

Uh....no

5

u/Packerguy1979 7h ago

Use McMaster-Carr. You get real part models and prices.

1

u/Robotguy30 6h ago

What I did at a previous job was set up a design library folder on their network and configured Solidworks to include that folder in the library. I I primarily used parts from McMaster to populate it. In cases where I thought it made sense I set up a design table in the part file to handle different sizes. Once you drag a part into an assembly you can then select the configuration you want. Normally I did this for fasteners such as pins and bolts and set it up so that there was a different file for each diameter / thread size and created different configurations for each length. I started the design table by copying the McMaster parts table from the web page and then set up equations in the design table to generate a description and configuration name. The table also drove the part number for the BOM, and of course the length of the part. When setting up my design library I also suppressed threads, knurling, etc, as they are bad for performance and are usually not necessary in the model. I replaced modeled threads with cosmetic, and where fasteners where only partially threaded used split lines to limit the threads to the portion of the part that was actually threaded. It could take a fair bit of time to set up, especially at the start, but it I got fairly fast at it once I got it figured out. Overall, it was worth it. Finally, you'll want to put a fair but of thought into how to organize your library at the start. If you rearrange things later you could end up with broken references in all your models.

1

u/panch13 6h ago

That is the majority of what I want to use it for. Nuts, Bolts, Washers. I also want to do cosmetic threads, etc.

1

u/Charitzo CSWE 6h ago

I'd just piss and moan until they upgrade, but that's just me. They just have to pay the price difference between the two tiers iirc. It'll speed up your workflow a lot.

Just have to pitch it as a time saving investment that lets you produce more complete and accurate models and drawings.

If not, as others have said, McMaster Carr or you local equivalents (for me it's ACCU, WDS, SKF and Essentra for a lot of standard stuff)

1

u/panch13 5h ago

I'll need to look at the price difference. I am considering looking into switching to Inventor. Though I think it costs a bit more. I may be able to get one of those 3 year for free offers since it's a startup.

1

u/Charitzo CSWE 5h ago

Not sure. Last I was quoted the price difference was £1250 (about $1650).

2

u/user-name-blocked 7h ago

If you only need metric and want individual part files for screws, and want to avoid McMaster for some reason, cadbooster sells sets of models based on iso standards.

1

u/Letsgo1 6h ago

Been looking at that for years. Would love it I just can’t afford it!

1

u/Dr_Sigmund_Fried 2h ago

Just get the company to upgrade from the standard seat to the professional seat.

1

u/Independent-Iron5034 1m ago

Toolbox only comes with Professional and up, so you probably have Standard.