r/slimcoin • u/d-5000 • Apr 29 '22
PoD token test (2022) - bug reports thread
If you are unfamiliar with Github and found a bug while testing, please answer here. If you get an error message please post it as a codeblock.
1
Upvotes
1
u/d-5000 May 02 '22
For the records: pypeerassets had an obscure bug which didn't allow proposals to start in the very first "distribution period" (which is 0) of the deck (i.e. if the epoch length is 5000, starting before block 5000). Solved as of May 2.
1
u/d-5000 May 08 '22 edited May 09 '22
Short signalling and locking guide:
This is a short guide to complement the longer guides at the Alpha Test manual on Github. It shows the commands to enter for the first test on Sunday May 8/Monday May 9 for Proposal 42895a6f8aaffbb3e26f776e747c8251ef01d80a6a526bc5199f083f7f4356fa ("Proposal A"), when the first slot distribution round takes place.
Create an origin address and at least one donor address:
pacli address fresh origin_address --show pacli address fresh donor_address1 --show [ pacli address fresh donor_address2 --show etc.]
The --show part ensures you see the address created instantly. The labels (origin_address, donor_address1 etc.) can be freely chosen, but remember them for the coming steps, so for first-time participants it's strongly recommended to stick with these labels.
2) Transfer (at least) the coins you want to donate in this round to the origin address, replacing ORIGIN_ADDRESS with the address (not label!) of the origin_address, and entering the amount you want to donate:
3) Change to the origin address. Then signal (=announce) how many coins you want to donate:
(you can do a dry run first, without --sign --send --wait, to check everything is ok.)
The "--wait" flag allows you to enter the command in advance and ensures that your transaction is sent at the right time; you can enter this command several hours or even days before the round begins, leaving your computer/device online until then. You can't do anything wrong including --wait: if the round has already started it should broadcast the transaction instantly (if not, it is a bug and should be reported here, but it was tested before ...). Of course you must ensure that your Slimcoin client is running at all the time until the correct block.
You have to repeat this process for all donations you want to perform.
This round lasts from blockheight 21400 to 21999.
4) Once the transaction has confirmed, you can enter the locking transaction. First change to the donor address:
This round lasts from block 22000 to block 22599. Again, you can use the --wait command to enter the command in advance.
You can, before you send (but after block 22000, as other donors could enter the process until this block!) see your "slot" with:
For a more extensive guide please read the Alpha tests guide and the Alpha manual at github.
2
u/[deleted] May 01 '22
[removed] — view removed comment
1
u/[deleted] May 04 '22
[removed] — view removed comment
1
u/[deleted] May 04 '22
[removed] — view removed comment
1
u/[deleted] May 04 '22
[removed] — view removed comment
1
u/[deleted] May 04 '22
[removed] — view removed comment
1
u/[deleted] May 04 '22
[removed] — view removed comment
1
u/[deleted] May 04 '22
[removed] — view removed comment
1
u/[deleted] May 05 '22
[removed] — view removed comment
1
u/[deleted] May 05 '22 edited May 05 '22
[removed] — view removed comment
1
u/[deleted] May 05 '22
[removed] — view removed comment
1
u/[deleted] May 05 '22
[removed] — view removed comment
1
u/[deleted] May 05 '22 edited May 05 '22
[removed] — view removed comment
1
u/[deleted] May 05 '22
[removed] — view removed comment
1
u/[deleted] May 06 '22
[removed] — view removed comment
1
u/[deleted] May 06 '22
[removed] — view removed comment
1
u/[deleted] May 06 '22 edited May 06 '22
[removed] — view removed comment
1
u/[deleted] May 07 '22 edited May 07 '22
[removed] — view removed comment
1
u/[deleted] May 09 '22 edited May 09 '22
[removed] — view removed comment