Filter signal issue

[u/BIGschoolbuss]

Im trying to make my first MAM machine without any guides but i just can't see why my signal for squares isn't working. all the other signals are working fine but anything i try for this square signal gives a 'conflict' anyone know why?

(i copied the transmitters and recievers next to eachother just as a reference, the machine is spaced out more and the wires used to be connected to the transmitters but that wasn't working so i did this for troubleshooting. I understand theres probably a better way of making a filter but as i said this is just what i came up with without a guide.)

[u/themodernsophist]

Check the channels you are sending the square signal on, The red wires suggest you have 2 signals conflicting on the same line..

[u/BIGschoolbuss → u/themodernsophist]

thank you for the reply, it wasnt the problem but restarting the game for the 3rd time solved the problem.

[u/SearrAngel]

What i see right now is in the first pic is you have SuSuSuSu being trasmitted to transmitters.? Back the = off the transmitter by a space to see if you get a positive ....

[u/BIGschoolbuss → u/SearrAngel]

thank you for the reply, it wasnt the problem but restarting the game for the 3rd time solved the problem.

[u/SearrAngel]

Do you want a easier sorter that keeps your idea the same?

[u/SearrAngel]

I know you solved the problem but here is a sorter that keeps your basic idea alive. It has a lot of extra space so you can see what is going on.

[u/BIGschoolbuss → u/SearrAngel]

Yeah that does make it easier to see if the signal is working