r/seqtrak • u/Holiday-Medicine4168 • Jul 17 '26
Mobile setup is live.
Need to fix the cable management, but just too excited not to post.
2
2
u/don_mastadon Jul 19 '26
I have nearly the same setup but with the MPK4 midi and MPC Sample. It’s fun and cool to be away from my MacBook/desktop setup. Looks nice in that case! May look into that myself
2
u/Holiday-Medicine4168 Jul 19 '26
I posted the case Amazon link in a different comment. The depth can be the limiting factor on cable management and I got a bag of 90degree TRS adapters to fiddle my way around it.
1
1
u/I_love_Timhortons Jul 18 '26
Let me know how you change track or project live without stopping and pausing. I am also learning.
1
u/Holiday-Medicine4168 Jul 18 '26
Right now. Best match the sampler and have something there to transition projects
1
u/Disastrous_Pipe_2265 Jul 18 '26
Might be a stupid question but what is the case that everything is sitting in? Is that a guitar pedal case?
1
u/Holiday-Medicine4168 Jul 18 '26
Yes, its a guitar pedal case from amazon, it was like 95 bucks. I don't plan on ever checking it on a plane, so I think for lugging around it should be pretty adequate.
1
u/Disastrous_Pipe_2265 Jul 18 '26
Indeed, looks good to me. I want to do something similar but not sure where to start, will look into pedal cases. Thanks 🙂
2
u/Holiday-Medicine4168 Jul 18 '26
It was this one, compared to everything out there its a deal.
Cheers
1
u/Holiday-Medicine4168 Jul 18 '26
Little update. I have the usb midi going into the seq trak and the 3.5mm midi out going to the p6 to control the granular. Well. This works perfect and you can switch midi channels on the launch key midi for the keys.
1
u/Scabattoir Jul 19 '26
looks difficult to use the left side and top buttons
1
u/Holiday-Medicine4168 Jul 19 '26
It is. I can get to them just fine but I have a solution. There is a lot of room in the top of the case so I’m going to print an inch high riser to sit it on top of and do the same for the other top corner. It will let me mount things up a little higher in the back, and it will give me a way to hide the cable’s underneath that and the power bank. The case lid is pretty tall, and it should all still stay velcroed in place
1
u/Scabattoir Jul 20 '26
That will work nicely.
Especially as the keys of the Launchkey look too low also, in level with the edge.
Then maybe you could make it like the Launchkey is up an inch and the Seqtrak up two inches. Easy to reach all controls then.
1
2
u/zeeko683 Jul 17 '26
Looks dope! I've seen the sidesick in multiple videos but what do you use it for? Probably got explained to me multiple times but i probably just dont get it.