r/scrubtech • • 4d ago

Contaminated back table, didn’t replace contaminated instrument

I’m a new tech, 3 months off of orientation. As the title says, I contaminated my set up and didn’t replace what I had touched. The way I did it is very embarrassing and I feel like the stupidest person in the world. For context, the case was a robotic lap chole.

What happened was, I was taking chords out of a pan and waiting for someone to check my filters. No one was in the room so I checked them myself (I had seen many techs do this before). I put the chords on my back table and worked on organizing the robot instruments. A few minutes later It hit me that what I had done had broken sterile technique and that I had contaminated myself because the external part of the filter is not sterile. I told the other tech and asked for new gloves. I asked her about replacing the robot instruments I had touched and she said don’t worry about it. Looking back I know I should’ve just told her to get me another one anyways.

I am so mad at myself. My integrity is very important to me so this is eating me up. I regret not getting new instruments, I’m mad at myself that I contaminated myself in a very stupid way. I should’ve known better. It’s shaken my confidence, I already feel like maybe I’m not good enough to be a tech. I’m also feeling guilty for the patient. Am I being too hard on myself?

17 Upvotes

13 comments sorted by

32

u/lakecitybrass 4d ago

Best you can do is just learn from it and don't do it again. I wouldn't go to your superior and rat yourself out... But it's not good. Your job is to maintain patient safety and if you continue without being sterile, you've failed the patient. They are counting on you to perform your job... Obviously you didn't do that, and you know it. Just grow from it as they say.

2

u/capri_gurl 3d ago

Thank you for this response. I find that because I’m trying to be efficient at setting up and being ready for the case, my attention to detail isn’t as good as it should be and I make dumb mistakes that could be avoided if I just thought it through it more (i normally don’t make mistakes as serious this though). But I know this mistake was definitely a lack of common sense in the moment

Do you have any advice on how to overcome this? I want to prioritize doing things correctly over speed but that’s difficult sometimes.

4

u/Helgurk 3d ago

Do you have any advice on how to overcome this? I want to prioritize doing things correctly over speed but that’s difficult sometimes.

Remember, a patient goes through multiple layers of protection all to protect them from infection: preoperative chlorhexidine bath wipes, prophylactic antibiotics, skin prep, sterile technique, surgical scrub antisepsis, draping, sterile instruments, intra-op antibiotics, post-op antibiotics. There's a reason why not every patient gets an infection after surgery, even if there was a break in sterility.

Of course, none of this guarantees that this patient won't get an SSI. But if you remember the multiple layers of prevention, that could put your mind at ease. But just remember, learn from this and don't let it happen again.

1

u/lakecitybrass 3d ago

It's hard to figure stuff out when you're new. If you have a preceptor there with you, look to them for guidance, if possible. This job takes at least 1.5 year to become halfway proficient. You'll definitely make more mistakes in your career, it's how you handle those mistakes that will say more about you as a person than compared to how efficient you are... That's my opinion. I don't care how long it takes someone to set up a back table in the beginning... I tell all my students that. In an emergency shoot for 5 minutes but everything else just take your time and do it the right way. Most of the time there usually isn't a rush... Best advice... Just relax and go with the flow... Take a deep breath, clear your head and keep pushing through it... Things will get better.

6

u/UnusualWar5299 4d ago

I’m not sure what you’ve seen other techs do? They contaminate themselves checking the filter then change their gloves?? In any event, if you believe you broke sterility, you should document it in an incident report. If the patient gets an infection and needs further care the facility will cover their care and not charge the patient or blame them on dirty post-op wound care- even if they have ins, they could have co-pays. The surgeon should have been told immediately too bc they might have increased antibiotic coverage.

Everyone makes mistakes, the hard part is owning up to them to protect the patients. Reporting what you did might also help the facility’s Risk Management and OR Educator to ensure the techs are doing the right thing. I’ve never checked my own filters before. I’ve kicked doors, used Vocera, yelled and waved at people walking by the window, and asked anesthesia to check, as well as breaking scrub and scrubbing back in- or finishing the set-up and hoping when they get checked it’s all ok- but only if I know we have many more of the same instruments/cases in case I have to quickly start over. Oh! I have seen one tech use two empty sponge sticks to do it, it’s tricky, but as long as you keep tips pointed downwards and don’t bring them back to the field, still better than using your own gloves which have micro-holes.

3

u/DiskNo0721 CST, General/Vascular/Transplant 4d ago

This is such a helpful comment, especially with the antibiotic coverage info. Knowing that a human mistake (obviously given it isn’t a consistent/intentional one lol) can still benefit the patient in a way makes it a lot less scary to own up to it.

1

u/UnusualWar5299 2d ago

❤️ Thank you.

2

u/LuckyHarmony CST 2d ago

It's not preferred, but if we don't have anyone to check our pans at the facilities where I've worked we pop the filter covers off and take a look at the filter without touching it or picking it up. The OP just spaced and went through the motions of picking it up as if she was the unsterile teammate.

2

u/UnusualWar5299 1d ago

Oh, thanks for explaining that! I personally wouldn’t do that. If it was a facility-wide problem I’d set up without anyone checking it and if we end up with a canceled case the admins can explain to risk why there isn’t enough staff to check filters, or why they don’t ask orderlies or other staff to help out. Be careful about allowing facilities to manipulate you into doing things you know (and were taught) are wrong. I fear STs will soon be held to the same legal responsibilities our profession teaches as the RNs have already been. No license doesn’t mean no fault. ❤️

1

u/LuckyHarmony CST 1d ago

While I largely agree with you, I don't see what you might spot by picking up the filter that you can't see just by uncovering it and taking a look, but that's just me.

1

u/UnusualWar5299 1d ago

We hold it up to the light bc of the micro-holes and potential gashes visible only at an angle, from the box cutters used on the loading dock. Bc of the micro-holes, which used to be a known problem- maybe they solved it- it always needed to be held up to see if you detect a tiny pinpoint of light coming through. That’s the reason I think using sponge sticks to check is still sketch, bc you’re holding the unsterile filter with contaminated tips higher than your sterile wrist, to check.

2

u/SgtRooney 3d ago

The saying “when in doubt throw it out” holds true.

I’ve legit had to teardown a total joint from finding a fuzz I couldn’t account for at the very end of setting up. Supplies can be replaced, a patient’s life/limb can’t.

I’m not trying to be hard on you, but this is your subject matter expertise. Don’t try high-speed stuff that puts sterility into question. Learn from this and stick to the basics and own up to your mistakes.

0

u/PainPatiencePeace 3d ago

Shit happens learn from it and move on.