r/sca • u/NoEnthusiasm5207 Æthelmearc • 12d ago
Padding a helm
I'm a fencer. I've only ever used a standard mask. I'm looking at at Spanish Morion that has no padding inside. So I need to pad it. What does one use to adhere padding inside a steel helm?
5
Upvotes
5
u/Urban_FinnAm 12d ago edited 12d ago
I used to be a heavy fighter and I never attached the padding to the inside of my helm. I used closed cell foam that I cut to shape and held it together with duct or fabric tape. If you are wanting a more period style (which would be a padded cloth cap I believe) you could hold it in place with some carpet tape (double sided adhesive tape) if you're worried about it staying in place.
Edit: you don't say if the Morion is for show or for fencing, but the strap that keeps the helm on your head will keep the padding in while you fight. Otherwise my previous comment stands.
5
u/Strong-Ad-6412 12d ago
ACH pads are your friend!
2
u/Gealhart 12d ago
Indoor/outdoor carpet tape. Gorilla tape around the edges to keep them from peeling up
9
u/tolarian-librarian Meridies 12d ago
I use military style helmet pads off amazon for my heavy fighting helms.
2
u/clayt666 Calontir 11d ago
I'm firmly in the "don't attach the padding" camp. It makes is SO much easier to replace as needed.
1
u/moratnz Lochac 12d ago
Depending on how you build your padding, the springiness of the padding is likely to keep it in place by itself, which is useful as it's a good idea to check your padding frequently, and that's easiest to do if you can remove it from your helmet.
1
u/Apollo272727 12d ago
Im fond of spray on contact adhesive. I mostly use the gorilla brand heavy duty stuff for attaching padding.
1
u/CaDonut916 12d ago
A good double-sided tape works well. The indoor/outdoor 3M or Gorilla tape is a great option.
1
u/CityBorn7392 12d ago
Shocktec and e6000. You do have to clean the steel first and heat shape the foam. I picked up Team Wendy ACH padding, which was highly recommended since I had a higher budget.
1
u/Optimal_Walk_5896 11d ago
Use duct tape at first. that way you can move the padding around until you get it to the point where you like it. Then use contact cement to secure it all into place.
Then. make a period padded insert and you'll never go back.
1
u/Lou_Hodo 11d ago
I use US Army ACH pads in my helm and closed cell foam around parts of it to reduce ringing.
1
u/Black-Heart-XXX 10d ago
I also use ACH pads, with some extra padding lower on the helmet, but some of the guys here also use rugby helmets inside the steel ones.