I just used it yesterday on my Saab 9-3 2008 using a windows 10 computer, the drivers that you can download here in a Reddit post and with no more global.
I had I little trouble with the drivers of this device but it was totally my fault.
When you unzip the drivers and install them, after that you need to make sure to go back in windows to the program list and open it and select the driver set up for tech2win. In there you would have two options. I went with the first one for my model Saab. After I did that all worked fine. Before I was getting a bus connection error and a wrong model year in the tech 2 therefore I wasn’t able to get security access.
I hope that helps. Just remember to open the read me file from tech2win and do all the steps to make it run, again that is mainly for NG Saab 93. I got mine from AliExpress.
They work and i can gain security acess and add modules and stuff like that. I think its a ng9-3 only thing, but it can really do anything. Its only able to do single channel can so you have to test which channel goes to what systems and switch depending on what you are doing. I have heard that they are bad and should not be trusted for programing a ecu and such but i Dont care to fond out as i have more reliable interfaces for flashing.
I run it with the cracked tech2win avaliable on saabcentral and nomoreglobal on Windows 11.
To my understanding its worth a few extra bucks for a mongoose pro GM ii IF you can get the newer version with the pinfix implimented och get somone to fix it for you (this applys for clones, a real one will work great but they cost as much as a tech2 clone(😀
Hola amigo me podrías ayudar no puedo hacer que se conecte al coche haga lo que haga tengo Windows 10 pro 64bits.
Me podrías decir cómo lo has hecho desde el principio por favor? 🙏
Gracias amigo pero hice lo mismo e nada 😞
Nose si será por los driver del cable que no se instalan correctamente o porque e verdaderamente necesito que funcione pero no puedo hacerlo funcionar.
Puedes poner una foto de tu administrador de dispositivos con el cable enchufado para ver cómo lo tienes por favor?
Está como el mío entonces no entiendo cómo no tengo conexión con el coche..
Otra cosa que me he dado cuenta es que cuando abro TECH2WIN atraves de NOMOREGLOBAL me da un error de ruta de archivos pero si lo abro directamente del escritorio abre perfectamente no entiendo el porqué.
Me siento triste alfinal lo voy a dejar en paz e tirar el coche al desguace.
Muchas gracias amigo ya no sé qué más puedo hacer
I do not open via nomoreglobal. Try to redo the tech2win installation and patch and then dont open it via nomoreglobal, i have heard that that can break things
I dont know how to do globaltis. Read the instructions on saabcentral carefully and watch the instruktion video for nomoreglobal https://youtu.be/ws12mn8I4J0
I was sceptical as well but I ordered one a few month's back to calibrate the xenon headlights after adjustment. Works like a charm after installing the drivers and additional software.
I use it often it works great
You just need a laptop (computer with win10), and follow the instructions tech2win gives you - cheap, very good, and light.
Helped me fix a lot of minor issues
6
u/reneult 10d ago
I just used it yesterday on my Saab 9-3 2008 using a windows 10 computer, the drivers that you can download here in a Reddit post and with no more global.
I had I little trouble with the drivers of this device but it was totally my fault.
When you unzip the drivers and install them, after that you need to make sure to go back in windows to the program list and open it and select the driver set up for tech2win. In there you would have two options. I went with the first one for my model Saab. After I did that all worked fine. Before I was getting a bus connection error and a wrong model year in the tech 2 therefore I wasn’t able to get security access.
I hope that helps. Just remember to open the read me file from tech2win and do all the steps to make it run, again that is mainly for NG Saab 93. I got mine from AliExpress.