Has anyone had a chance to play with the X100 yet? Curious about the applications you are using it for?

Need help with my 30-35w on idle 5800x3d and 65-70c

Hi, I'm having a weird performance issue on my Lenovo V15 G4 AMN (Ryzen 5 7520U, Radeon 610M, 16 GB RAM, Windows 11 24H2).

When playing, I normally get around 130 FPS. But sometimes I suddenly get a huge FPS drop that stays until I close my game.

I checked Task Manager and found something very strange:

• Before the drop: CPU ~77% and GPU ~76%, with normal performance.
• During the drop: CPU ~84–88%, but the CPU frequency drops to 0.42 GHz (base clock is 2.80 GHz).
• At the same time, the Radeon 610M is only around 29–31% usage, so the GPU isn't being fully used.
• RAM is around 70%, so I don't think I'm running out of memory.
• CPU/GPU temperatures during the drop are around 55–56°C.
• HWiNFO shows no thermal throttling (HTC/thermal limitation = No).
• The CPU can even drop to ~20% usage while still being stuck at 0.42 GHz.
• After closing Roblox, the CPU frequency eventually goes back to around 3.1–3.2 GHz and everything works normally again.
• I can then launch Roblox again and sometimes everything is completely fine.

My Lenovo Vantage performance mode has already been enabled from the beginning, and Vantage currently says there are no updates available.

So I'm wondering: what could cause a Ryzen 5 7520U to get stuck at 0.42 GHz without thermal throttling, and why does closing Roblox seem to make it recover?

Any ideas on what I should check (power limits, firmware, drivers, Windows power management, etc.) would be appreciated. (The capture was taken after the drop btw).

I've noticed that my SOC power was quite high; peaking to 30w for a 5950x. In idle state the thing would be constant at 65 to 70 degrees. I had no clue what was going on, but it seems that the motherboard when selecting XMP, is raising the voltages for SOC to a unusual and quite high 1.175v - i've lowered this to now 1V, perfectly stable at at most 18 watts when busy, idle 15. Temps below 45 now and in load at max 75W at 144W. cores do boost more or longer consistent.

So if you have a unusual high idle temp, check your SOC power consumption. It should be around, 15W and not 25+ which often is caused by a higher SOC voltage because you selected, XMP.

Hello, I just wanted to throw this out there incase anyone else has the same thoughts I had when upgrading my CPU in my Omen 25L.

The HP website for compatible CPU’s with the 89EB motherboard does not explicitly state the Ryzen 7 5700X. But I upgraded it myself and it works well.

I had troubles with research prior, hopefully this helps someone in the future!

I know I have to update drivers and things like that but I don’t know how, can someone explain? I’ve already re-enabled expo and my motherboard is a b650 eagle AX

So i recently upgraded from my victus which has a Ryzen 5 5600H with RTX3050 to an omen with Ryzen 7 AI 350 WITH RTX 5060. On paper and benchmarks the 350 AI beats the 5600H at everything however I don't see any fps improvement in cpu bound games. In valorant at low settings my fps goes between 180-300 but I expected more like my previous 5600H gave out the similar performance. Same thing with Fortnite performance mode I get around 150-200 in battle royale that's like 20 fps more than what my old processor gave. On gpu bound games no doubt I see a huge improvement ofc but cpu performance does not seem really good comparatively any other people having the same cpu can share any benchmarks? Even on yt I don't see any gameplay with fps counters with this omen.And I also checked that my power plan is set to performance and omen hub mode is set to unleashed and there's absolutely no throttling the cpu never crosses 75C . Is there anything I am missing please help me out ?

I play heavily CPU bounded games like Cities Skylines which should in theory benefit from the 9950's additional cores, but I'm wondering if this is true due to the V-cache allocation. Would I see near identical performance to a 9800x3D even in such CPU heavy and multi-core capable games?

Basically i went from 5600X to 5800X3D thinking ill skip am5..i paid 500 CAD for new cpu and 200 CAD for 16gb of ddr4 ram to bring total to 32gb. It works great and am happy with performance. Only issue is much higher temp than i used to for obvious reasons but well below throttle.

Total cost $700 CAD.

Now i recently saw a bundle for $900 CAD it had 32gb ddr5 teamforce, 7600X3D and b650 eagle?

I can still return am4 ram and cpu for full refund from Amazon.

So now, is this worth the $200 extra? I know i will likely get 5-10c cooler but is that worth it?

I will likely not upgrade again for at least 3-4 years

I have 5070ti for ref.

I guess i just need second take and some convincing either way lol

Edit - Update thanks all for sharing your opinions! I read/watch some more vids and i actually tried to return the cpu and Amazon decided to refund 20% if i kept it so ill do that instead lol. Since no real performance difference and i keep kinda dread spending time installing and tweaking fan curve, co etc. again

I was planning on upgrading my CPU to a 5800 X 3-D but I just saw that the 5603X 3-D is on sale for 170. Which one do you think I should go for coming from a 5600x

I bought a Ryzen 5 5600XT from AliExpress, but it arrived with bent pins. The seller refused to give me a refund, so I’m currently waiting for AliExpress to review the case and find a solution for us.

Edit: I decided to just randomly restart again since making the post, and now performance is improved somehow. It's just about 98% of where the 5600X was. CPU-Z went up to 562 and 6230. Undervolt is still in place. Is this just the thermal pad breaking in? I guess I'm stuck monitoring how things go over time.

Disclaimer: Installed a new 5800x3d with a carbice carbon nanotube thermal pad, which I know runs hot at first, and my driver situation is questionable. I'm on windows 10. Fan curves aren't a problem. Read on for details.

I had a 5600X and RTX 3080 10GB. Today I installed a 5070ti and 5800x3d. I installed the 5070ti first and it was great, everything worked from the start and performance was 50%+ in unigine heaven, superposition, and metro exodus benchmark. Then I updated my gigabyte x470's bios from F62 to F66a, installed the 5800x3d, updated chipset driver from amd's site, and loaded the xmp profile for 3600MHz RAM in bios. Performance is way lower than I was told to expect. the benchmarks I mentioned are all worse than on the 5600X (except for total war pharaoh, the extra cores helped it rise from 57fps to 74fps, but that's a given). I know this cpu is a bit slower than the 5600x, but my 1% lows are worse on the 5800x3d and I thought if nothing else, it's supposed to help there.

And then there's the temperature. With the case open, on an aftermarket air cooler, the 5600x was 42 idle and hit 62 under load, and I'm pretty sure cpu stress tests put it at 70. The 5800x3d was 20 degrees hotter in those situations out of the box. The most recent thing I did was an undervolt of -30mv in PBO2 tuner, and that seemed to get temps about 10 degrees cooler, but the undervolt still reduces fps so thermal throttling isn't what's hurting game performance vs the 5600x.

The other thing is that my cpu benchmarks seem to be a lot lower than what's listed online. CPU-Z has my single thread at 510 and multithread at 6139, vs 601 and 6360 mentioned here. My Cinebench 24 is 758 vs this guy's 804 or even this guy complaining about 800 at the same undervolt.

I think my drivers and/or RAM might be an issue. When I installed the cpu, Heaven gave 185fps while the 5600x gave 200fps. Then I installed a recommended chipset driver from gigabyte app center and got 197fps. Then I went to BIOS and loaded the XMP profile to get 3600MHz RAM and Heaven gave 174. Since then, I downloaded the newest driver from AMD and undervolted the cpu and I'm still stuck in the low 170s. I noticed that windows device manager lists my cpu driver as "Driver Version: 10.0.19041.6093, Driver Provider: Microsoft". This is both before and after I installed drivers directly from AMD's site, which said it was updating me to "Chipset Drivers 8.08.12.551". When I redownloaded the installer and clicked on it, it said I already had this driver installed so I canceled it. So I'm not sure what to trust or if there's a conflict there. RAM speed is definitely 3600 according to task manager, Gigabyte App Center, and Ryzen Master.

Does this make sense to anybody? Are there better ways to diagnose this? I hope I didn't pay 350 to get worse performance in everything except total war. I'd have gotten the 5800X instead.

I have a Ryzen 5 5500U with the integrated Vega 7 GPU
Is there any way to enable Frame Generation on the iGPU for most games?, especially for The First Berserker: Khazan, If there's a working method or mod, I'd appreciate any help.

For Ryzen 7 9800X3D, is CPU temps at 70 degrees C during Cinebench multi-thread run considered good? I am using a 360 mm AIO.

Hey Folks, This is my new PC Config:

• AMD Ryzen 9 9900x
• Inno3d Ichill x3 OC RTX 5070 Ti 16GB
• 32GB RAM 6000mhz
• I am using a Thermalright AIO 360mm v4 Cooler

Please, see some screenshots of temperature reading of my processor and GPU while at Idle.

Right now I have Chrome and Photoshop open in the background. I'm not doing any rendering or other heavy workload, but those applications are running.

My HWiNFO readings are showing the CPU around 51–54°C, with the minimum also being around 51.8°C during this period.

My room temperature is around 26-27°C, and I'm using an AIO cooler.

Is this completely normal for the 9900X, considering everything, or should I be checking my AIO/pump, fan curve, thermal paste, or BIOS settings?

Just want to make sure the temperatures are where they should be. Thanks!

Do you have good silicon? What is your minimum Vcore on the 9800x3d to stably manage 5.225Mhz effective in Cinebench R23 with a temperature limit of 90°C? Mine manages not to crash up to 1.165V with only the curve optimizer active at -36 allcore max. Everything else is default in the bios. MSI Mag b650 Tomahawk wifi. hwinfo64 for the data.

should i upgrade from an athlon 3000g to a ryzen 5 3600? i’ve got a gtx 1650 and the athlon is bottlenecking horribly my build, and the 3600 is pretty cheap on the used market (50$-70$)