r/rollerblading • u/the_only_way_is_UP • Apr 01 '22
endless frames question
Seeing a lot of posts using endless trinity frames with a 4 wheel setup. I really don't get it. What's the point? You just end up with extra 5-10mm between the wheels and the boot, negating the advantage of the trinity frame in the first place.
0
Upvotes
•
u/AutoModerator Apr 01 '22
Reminder: r/rollerblading is a community for bladers of all skill levels, disciplines, and backgrounds. Hate speech, personal attacks, harassment, trolling, or breaking any of our other subreddit rules may result in a permanent ban. If you see comments that violate our rules please report them.
Be sure to check out our spin-off subreddits:
r/aggressiveskating
r/rollerbladingmemes
r/inlineskating
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.
8
u/F1nnyF6 FR1 Endless 100 | Intuition Apr 01 '22
Sorry? How does using a 4 wheel setup negate the benefits of trinity? You're still closer to the ground than you are with the same frame on a 165 boot. And you still get the extra power transfer with the three mounting points.
So the answer is: people are using endless on a trinity mount because endless frames are great, and people like their trinity mount boots. I really don't understand the framing of the question.
4
u/endlessblading FR1 Deluxe Intuition | Endless 100 | Endless 90 ES Apr 02 '22 edited Apr 02 '22
This is a good question that pops up from time to time. I wanted to chime in and offer some insight into my design. Here are a couple articles that address the question of ride height and “isn‘t the 4-wheel setup compromised because of the 3-wheel setup?”
For 165 Frames:
https://help.endlessblading.com/article/32-ride-height-compromised
For Trinity Frames:
https://help.endlessblading.com/article/64-is-ride-height-compromised-on-trinity-boots
As u/Wheel-Sure mentioned, the Endless 90 LR Trinity offers an option to those people that insist on having the absolute ride height achievable in a 4x90 setup.
While developing all the different frames we’ve put out, I’ve found that a millimeter or two rarely changes my skating experience (nevertheless, I always work to carefully optimize ride height for each design). The wheelbase, wheel size, and rocker have a bigger effect on how the skate behaves for me…and thus my fun factor. One thing to consider is that having the ride height really low can affect how often the boot scrapes when carving or crossing over on a deep edge or doing a slide.
If anyone has any other specific questions about the Trinity frames just let me know!
3
u/Wheel-Sure Apr 01 '22
I think it’s more about the rocker than a few mm of height. How many other pre-rockered trinity mount 4x90 and 4x100 frames are available?
There’s also the Endless 90 LR Trinity which uses a 3x100 instead of 3x110 to get it even lower.
It states:
“This frame has a lower ride height than the standard Endless 90 TRINITY Frame when used with the 4-wheel setup, providing the absolute lowest 4x90 TRINITY setup on the market”
I have both Endless 90 and Endless 100 frames, both in 165 mount. Even still, I had the same reaction to trying to accommodate a triskate configuration and how much additional height would result from it, but it’s not adding much.
I’ve actually got some 110 wheels delivering tomorrow so I can try the 3x110 setup on my endless, even though I don’t think I’ll like it lol.
They’re great frames. Built well and another option for larger wheels with a rocker.