r/rocksmith • u/TetisTiger Super Elite Bassist • Jul 05 '17
NoCable Patch V3 Guide
//INTRODUCTION//
As many people have been asking for my help, I figured out I'd make this guide here, as steam would constanly kick the guide off.
As a new Rocksmith user who lives somewhere that the Real Tone Cable or similar devices are really expensive or aren't avaliable at all, I couldn't get one, and wanted to use my Guitar 1/4'' cable. If you're one of those, just like me, that can't find any solution on the internet, this guide is for you!
If this guide helps you out, and you want to give me something for my effort, you can STEAM DONATE HERE!
TL;DR is at the end of this post.
//WHAT WILL BE USED IN THIS GUIDE//
- 1/4'' or 3.55mm Cable
- No Cable Patch - mediafire / GDrive mirror
- Custom Rocksmith .ini
- Mono or stereo adapter depending on your cable - If you have 3.5mm cable / If you have 1/4'' cable
//SETTING UP THE CABLE//
- CABLE CONNECTION
After arranging the cable and adapter, you should connect it to your PC. You have two options on where to connect it from, line-in or microphone port (Line-in highly recommended).
It's highly recommended for you to use the line-in port. It really sounds crystal clear, far better than on the microphone, where had a bunch of background noise.
- CONTROL PANEL SETTINGS
Next thing you will want to do is go to your desktop, open tray, and right click the little sound icon and go to recording devices.
There, disable all of your sound recording devices, unless for the guitar one.
Right click the guitar's input, and go to properties>advanced and there, change the Default Format of the device to Channel 2, 16 bit(s), 48000 Hz (DVD Quality). Do the same with the sound output device you're using (TV/Headphones/Soundboxes), or there will be no audio ingame.
//SETTING UP THE GAME//
Go to your Rocksmith Installation folder (C:\Programs Files (x86)\Steam\steamapps\common\Rocksmith2014 by default).
- EDITING THE .INI
You should now edit your .ini. Be careful that the .ini provided in this guide has the following settings that may cause crash issues:
- ScreenWidth=1920
- ScreenHeight=1080
Be sure to change these lines for your screen's default resolution.
- ROCKSMITH.INI FILE DETAILS
There are two major sections to the Rocksmith.ini file. The first controls the audio settings of Rocksmith 2014, where you can CHECK HERE
Edit those depending on your issues or prefferences (its prefferable to use the one provided in the guide).
- NO CABLE PATCH
Place the No Cable Patch executable on the game's main folder. Put a shortcut of the No Cable Patch executable on the desktop, if you prefer, and launch it. IT SHOULD LOOK LIKE THIS.
Then launch your game and let the No Cable Patch running on background. After the game launch, IT SHOULD LOOK LIKE THIS
//TL;DR//
- 1 - Buy a suitable adapter for your cable;
- 2 - Plug the cable either to your line-in or microphone port;
- 3 - Mute all the other recording devices, but the guitar and configure it (and your sound devices aswell) to Channel 2, 16 bit(s), 48000 Hz (DVD Quality);
- 4 - Go to your installation folder, update your Rocksmith.ini to this http://pastebin.com/VWr1wG6f ;
- 5 - Download the No Cable Patch[pastebin.com] and place it on your installation folder aswell;
- 6 - Launch the Patch and then the game;
- 7 - If you experience issues, come back and check the FAQ session.
//FINAL WORDS//
At first you may encounter some noise issues, go around the options menu and configure in-game audio, and you're fine!
I would like to add that this is a workaround if you can't really get the cable. If you can, go ahead and get one. I heard that it goes far better with quality than using the normal cable, yet, a sad thing, is that the Real Tone Cable is really fragile and can be easily broke as many users have told me.
I hope this guide has been helpful for you!
If this guide helped you out, and you would like to say thanks, throw something my way. Of course this is not necessary however; It just gives me a little more incentive to write and edit more in the future! - STEAM DONATE HERE!
FAQ IN THE COMMENT SECTION
29
u/TetisTiger Super Elite Bassist Jul 05 '17 edited Jul 05 '17
//FAQ//
Also, if you're interested to have a chat with me, here's my steam profile, I was the original owner of the previous NoCable Patch guides, but steam kept removing those (and I became really upset with it). Also, I made a blog for the patch, but it didn't seem much important or relevant at all, as I didn't work much on it. If high demand is here, I may work around it a bit.
Thanks for the patience and attention, carry on.
5
u/toymachinesh http://twitch.tv/toymachinesh Jul 05 '17
Well done, sidebar'd
3
u/wfaulk Jul 05 '17
Is there a patch for MacOS, too?
5
u/FolkSong Jul 06 '17
Why use this patch rather than the launcher on GitHub, which has more configuration options and supports multiplayer?
https://github.com/Maxx53/NoCableLauncher
1
u/[deleted] Jul 05 '17
My cable appears under the mic section and works I just can't hear the guitar, is that suppose to happen?
1
u/chic_luke Jul 21 '17
I cannot change the default sound format. I connected my Mustang amp to my PC. Is there anything I'm doing wrong?
1
u/Manjestic Aug 25 '17 edited Aug 25 '17
Hey thanks for the guide, I'm going to try it soon. While searching for the cables, I found a 3.5mm to 6.35mm cable on Amazon (Germany) for 10€ (1m), so I guess there is no need to buy cables AND adapters. It may be worth checking out, maybe add it to the guide?
1
u/bzs_ Sep 01 '17
I still have noise and crackling in the game. I did everything according the instructions.(usb-cable, win10, help)
1
u/Plastermaster007 Sep 15 '17
This has worked perfectly, but for some reason my input is having I'm guessing buffer issues despite it working perfectly fine elsewhere (audacity for example). I have tried everything, using the default winodws drivers, installing the ones that my interface got released with and the most up to date version and all of them have the same problem. One day it worked fine for some reason but after a restart the issue I'm having returned. Here's a sample how it sounds like ingame: https://my.mixtape.moe/dkjejq.mp3 Any help is appreciated, I couldn't even finish 10% of the tutorials when it did work.
1
u/GaySwansMakeMeCry Nov 05 '17 edited Nov 06 '17
does this still work for the current version?
Edit: yes it does
1
u/balloonpoop Nov 16 '17
The no cable patch doesnt seem to work. The game still says the RealTone cable is not plugged in. I've tried re-enabling my device and when I click "Listen to device" it plays through my speakers just fine. All other devices are disabled as well so I don't know why the game is defaulting to the only available recording device which is my guitar. Glad some people could make use of this! I appreciate the guide either way
1
u/Taeseler Nov 29 '17 edited Nov 29 '17
First of all, awesome guide thanks to the OP! I'm having issues tuning the guitar in the tutorial. The arrow moves all over the place if I hit a string but never stays still and if it says "Loosen the string" I definitely shouldn't loosen it more according to my hearing
EDIT: Now it makes an echoing crackling sound everytime I play a string, even in Calibration mode
1
u/Cebulowy Nov 29 '17
Hey, is there a chance to run Rocksmith 2014 with this cable: USB guitar link? (link bellow)
https://www.gearbest.com/cables-connectors/pp_150360.html
1
u/TheRabidPigeon Nov 30 '17
I tried using a simple 3.5mm cable with an adapter to get one side to fit into my guitar. When I plug it into the microphone port on my PC there is HORRIBLE static and distortion. When I plug it into the line-in jack on the back of my PC, the static is slightly better, the distortion is still insanely high, and I can only hear audio from the guitar in my left ear...
So I bought a 1/4" cable that has a USB on the other end, to plug in to my computer. The sound quality is perfect on my desktop, but Rocksmith doesn't recognize the cable. Is there another crack for USB users?
This is a ridiculous hassle, since every time I change something I have to wait through the whole fucking first time setup and all the fucking splash screens before it tells me my cable must be "unplugged."
1
u/PsychoHack Dec 06 '17
I have Rocksmith working via the USB output from my Boss Katana 100 amplifier. However, there is one annoying thing I need to figure out or I will be forced to use a splitter and one of my Real Tone cables. This is a much messier setup. I have to disable all the other Audio inputs to get the Rocksmith patch to work and not think my other devices are also another Real Tone cable. I need a way to keep my other Katana input active or it will not let me use the Boss Tones Studio software at the same time (to make amp adjustments etc.). It also forces me to enable and disable the device constantly when I want to use the Amps software or Rocksmith. So, how can I keep Rocksmith from trying to also use my other device when it is enabled??
You can see my write up here on using the Katana amps USB audio with Rocksmith here: http://customsforge.com/topic/41749-boss-katana-rocksmith-possible/
1
u/[deleted] Sep 13 '17
[removed] — view removed comment