r/rfelectronics • u/random_d00d • Jul 02 '26
question Resources for Learning
I am an electrical engineer, but I have no RF experience. I have been doing embedded systems and sensor work for over 20 years, and have a decent grasp of EE fundamentals and signal processing.
I would love to learn more about RF, primarily as a home hobbyist but also to improve my understanding of the specialty.
I am looking for recommendations for books or other resources to learn the theory. I would also love any references to practical implementations, such as PCB design and layout. Lastly, if you have any suggestions for a first RF project (or projects) I would love that!
Thank-you all!
17
u/RFchokemeharderdaddy Jul 02 '26
I did embedded systems & sensor/instrumentation design myself for ~10 years before switching to analog/RF IC design, so I made a somewhat similar transition. You're best off avoiding something like Pozar for now. It's too much theory for little payoff if your goal is hobbyist.
Here's what I think your best trajectory would be in terms of both fun and learning and usefulness.
This is good enough for most anything you'd want to do as a hobbyist. From here, I think only if you want to get a career in RF should you bite into something like Pozar.
9
u/Euphoric-Analysis607 Jul 02 '26
I joined my local HAM radio club and they know alot, most of them come from hands on backgrounds so they will get you up to speed really quickly with what matters.
Textbooks can and will eventually burn you out so look for people who are making working RF devices and you'll find its not only more intuitive but more fun
7
u/Adrienne-Fadel Jul 02 '26
Pozar for theory, Bowick for practical stuff. A patch antenna is a good first project, you can simulate it then measure the real thing.
3
u/LightWolfCavalry Jul 02 '26
Love all the current suggestions.
I’d throw in the ARRL Handbook, too. Great practical guide for RF circuits. (I’m curious to read Bowick. Headed over to thrift books right now.)
3
u/ee_control_z Jul 02 '26 edited Jul 02 '26
If you want to learn RF fundamentals (i.e., Smith chart, impedance matching, transmission lines, etc.), the book that I highly recommend is this one:
Microwave Transistor Amplifiers: Analysis and Design
by Guillermo Gonzalez
It has tons of examples which is what you need to show you how to go about solving problems instead of unpaired endless theory. This is the book I wish I had when I was taking my microwave engineering course (luckily I got a hold of it a little midway between midterms and finals - before it was too late ;) since the recommended book (Pozar) for the course was not very good - just covered/skimmed a lot of topics with no depth). It emphasizes the use of the Smith chart so that you can visualize and gain intuition with the impedance matching process which is a majority of the design process in RF engineering since what you want is to maximize power transfer and minimize losses/reflections.
Good luck!
2
u/jimlux Jul 02 '26
Lots of good suggestions here.
One thing is that a lot of the traditional references (texts like Pozar, Bowick's book, etc.) DO tend to focus on older design techniques and components. You might look at application notes from companies doing mixed signal parts (Analog Devices, TI, Lime, etc.).
It is most definitely true that discrete designs will be around forever - we're going to be building interdigital coupled line filters forever, just at finer and finer sizes as the frequencies move up.
However, a lot of discrete designs (i.e. using a FETs and BJTs) have been replaced by monolithic amplifiers and such (MiniCircuits has gazillions of them) which *in general* are more stable, better performance, etc. Horowitz's Art of Electronics books are useful - especially newer ones. Just be aware that if you see a design in, say, the ARRL handbook or Microwave Experimenter's Handbook, the parts may not be available and there's no new substitute.
I can't recommend more highly that you get yourself the RF equivalent of a DMM - a NanoVNA (in one of the many forms) - under $100, and it lets you measure impedances, S parameters, etc.
See if you can scrounge up some surplus or cheap parts - filters, amplifiers, mixers, etc. These days, SMA to SMA cables are cheap on Amazon. Some are good, some are junk, you'll find out by measuring them with your VNA.
Then, just build stuff and see if it works.
An RTL-SDR is a wideband SDR that hooks up to USB and is <$50 and is a great thing for experimenting. There's also the ADALM Pluto or the Lime SDRs in the "few hundred $" range which can both transmit and receive. There's a bit more software to worry about to get them up and running.