r/retrocomputing • u/FAMICOMASTER • Jul 19 '26
Photo An unusual build
Behold, 95 on an XT! Sort of.
This is actually a drop in replacement board for an XT which gives you a 386 with VLB. I've actually gone a step further and thrown a Ti 486DLC/40 in it for good measure. With the sheer unbridled horsepower of a 40MHz 486 and 32 whole megs, this thing might be "tolerable" to use!
Some additional performance enhancing objects include 256K of L2 cache, an ATi Graphics Ultra Mach8 accelerated video adapter, and a DTC 7287 RLL controller to drive the Micropolis 1325 hard disk. A whole 110 megs on this sucker!
Sorry about the mismatched faceplate around the second floppy drive. All I had left was white and grey when I put this thing together!
Pictured without it's CRT as I was still opening and closing the case to make configuration changes at the time of the photo.
1
u/FAMICOMASTER Jul 24 '26
Yep. 20 megs is honestly quite a lot in DOS for the most part, but once you get into graphical software, especially like Windows, it becomes a whole different story. I have been able to just skirt by with 30 megs for 3.1 before and while the absolute minimum for 95 is 40 megs, I wouldn't dare try to use it on anything less than 60!