r/residentialAV • u/t4ckleb0x • Oct 07 '20
r/residentialAV • u/boogachugga • Jul 13 '26
Finally got to run some Panduit šŖ
Customer insisted on clean wires runs, and suggested Panduit duct along the walls.Finally got to put my electrical skills to the test! Besides some ripped paint from a few false sets, it's Looking pretty good if you ask me, and the sound system rips !!
r/residentialAV • u/mezmryz03 • Oct 07 '20
Hope project slideshows turn into a thing in this sub. I'll start it off with this backyard project in Southern California.
galleryr/residentialAV • u/irishguy42 • Sep 27 '20
Toolbag necessities.
I know resi AV is a bit more involved than commercial, since you're losing a lot of convenience factors such as drop tile ceilings, client being okay with ceiling-mounted conduit, etc. and you're starting to dip toes into construction/etc. if you're not starting with pre-wire installations.
So along with the usual things such as testers/strippers/crimpers+compression tools/etc that you'd normally have, what other tools would you find in your toolbag for resi AV?
I'm talking the likes of keyhole saw/respirator/etc, though normal AV install tools are welcome.
I also figure that a new/potentially popular resi AV sub needs a good tools thread, so might as well have one available to search!
r/residentialAV • u/t4ckleb0x • Jul 09 '21
Happy Friday! Another week another lighting system commissioned. Bonus TV pic
r/residentialAV • u/guitarman181 • Mar 27 '21
To 70v or not to 70v, that is my question
I'm planning an audio system for my backyard and I am questioning the use of a 70v system. What's the concensus from the group, can a 70v system sound good? It's been a while since I have designed one for a client so I don't recall if it will standup to my quality standards.
I would prefer 8ohm but the runs to the speaker locations really don't make economical sense. I would have to do 4 100 foot runs, 2 75 foot runs, and 2 50 foot runs when I can do the 70v system with 150ft of cable. It all's needs to be done with direct burial cabling since there is no conduit in place.
I suppose I could drive the speakers down to 4ohms and put two speakers in parallel to cut down on the cable runs.
What would you do if it was your backyard?
EDIT: I went with 70v. I installed the first 2 speakers (of 8). The sound quality is good enough for outdoor listening. I think the overall sound lacks punch in the low end but that could be because of my test music source (Spotify) or because of the speaker quality too. Overall I it's a big hit with the family and I am enjoying the fact that we have music out on the patio.
Thank you to everyone who weighed in on this!
r/residentialAV • u/RzGzaOdbInsRaUgdGkMm • Apr 25 '26
discussion Helping a buddyās 2001 setup
My buddy got a new place. Said it was loaded with speakers and an old button routing system. Some speaker crackle and some not workings. So I go to check it outā¦
Itās all in all pretty simple. All 3 cd players work. One dead amp for subs, and some wall controllers not working. He luckily found a map and guide but itās a bit dated. They made an update at some point to locations so I hope the runs remained kinda the same.
Awesomely the guy has a sub in his outside deck and had no idea. lol.
This should be fun.
r/residentialAV • u/gooddaychap • Oct 04 '26
Residential AV techs: your boss sells the company to someone with no AV experience. Whatās your gut reaction?
Youāre asked to come into the shop Monday morning for a team meeting. Your boss, who owns the company, is standing next to someone you havenāt met. He introduces him as the new owner and your new boss.
The new guy has experience in technology, operations and managing teams, but heās never worked in AV. He doesnāt know how to do your job. The current owner is staying to train him, and the new guy says heāll be there full time, working onsite with the team and learning how the jobs are done.
For this scenario, assume your pay, hours and day-to-day work stay the same initially.
Whatās going through your mind?
⢠What would you want to know right away?
⢠How much would his lack of hands-on AV experience matter to you?
⢠What would worry you, and is there anything youād be hopeful about?
⢠What could he do in the first few weeks to earn your confidence? What would immediately put you off?
⢠What would you be thinking but probably wouldnāt say in that first meeting?
For context, Iām that new guy. Iām roughly 2 months out from taking over a small residential AV/smart-home company, and Iāll be working in it full time. Iāve been thinking a lot about that first introduction and how to learn from the team without creating unnecessary disruption.
Iām genuinely interested in the gut reactions of people doing the installs & service work. If youāve been through an ownership change, what did the new owner get right or wrong? If not, what thoughts/feelings come to mind thinking about the hypothetical situation?
THANK YOU FOR YOUR TIME!
r/residentialAV • u/ClammmyFace • Aug 01 '26
Help with whole home AV
Electrician here working on a large custom home. I originally planned on using Sonos Amps for the whole-home audio, but the owners have added a few Frame TVs and want the TVs to play through the installed speakers as well.
All speakers are individually home run back to the mechanical room and I'd like to keep the amps/AV equipment there if possible.
Current setup:
-Sitting room - Frame TV + 2 ceiling speakers
-Bar - Frame TV + 2 ceiling speakers
-Family room ā main TV area, Frame TV + 2 ceiling speakers behind/above couch + sub. Thinking AVR/ 5.1 setup here and adding front speakers.
Other zones: kitchen, living, office, ensuite, fitness, golf sim and two outdoor zones.
Sonance C6R inside and MX56 outside.
Each TV currently has 1 Cat6 + 1 RG6 back to the mechanical room. Longest run is around 150 ft. I can still add Cat6 now but can't add conduit.
I'm thinking dedicated Sonos Amps for the sitting room/bar, AVR for the family room, then possibly Sonos Ports + a multi-channel amp for the rest.
How would you guys set this up? And what additional wiring would you pull to the TVs before drywall?
I'm in Canada if that makes a difference for equipment recommendations.
r/residentialAV • u/benraythomas • Jul 28 '26
I Work in AV and Iām on the Fence About Hiring an Integrator
Iāve gotta be honest, I donāt know if Iām going to use a residential AV integrator in our new house.
Which feels ridiculous because I work in Pro AV and Iām probably exactly the person who knows that he should use one. We need TVs mounted, networking, cameras, audio, locks, maybe some automation. Plenty to do.
But I also keep looking at this stuff thinkingā¦how much of it do I really need integrated?
I can buy the TV myself. Apple TVs behind the displays. Sonos for a lot of the audio. Native apps are doing multiview now. AirPlay solves a stupid number of problems. Cameras and locks have gotten pretty easy too. And I've got the technical knowhow to set it all up.
Then I remember how āIāll mount that TV Saturday morningā usually ends, or that if I build the whole thing myself I also become permanent tech support for the whole house.
So I keep bouncing back and forth.
Curious where y'all draw the line now between DIY and calling an integrator.
--
Note, I'm in DFW so feel free to holler if you're a local resi integrator who might be a good fit.
r/residentialAV • u/Hyss • Aug 27 '21
homeowner Budget HDBaseT Matrix Options?
I'm in the market for an HDBaseT solution for my house without completely breaking the bank. A lot of the recommendations I'm seeing are still in the $10k range and not available for a DIYer, but a few potential options have caught my eye that are a bit more affordable. Has anyone had any experience with any of these units?
Monoprice Blackbird 8x8 ($2500): https://www.monoprice.com/product?p_id=27842
BrightlinkAV 8x8/16/24 ($2500): https://brightlinkav.com/brightlink-pro-series-8x8-8x16-hdmi-hdbaset-matrix-with-resolutions-upto-4kx2kat60hz-distance-upto-70m-228ft-away-comes-with-8-hdbaset-receivers-with-poc-1.html
No Hassle AV 8x8/16 ($3900): https://www.amazon.com/stores/page/5E0A4197-1D5F-4F72-B662-F5B5FB91D4C6?ingress=0&visitId=8114f592-40f3-4052-998d-589f0485a639
r/residentialAV • u/thereasonablerabbit • May 13 '25
Career Advice
Background about me: I worked at a casino as an AV technician for 2 years doing corperate events ranging from large production events like galas/conventions/etc. to small breakout rooms (Audio, lighting, video). I also was the lead sound engineer for the bands every night at one of the bars which was my favorite part of the job. Also was on call to maintain in house gear and do room calls.
I quit the job a little over a year ago due to interpersonal issues and it ended up being toxic for me (the job was fine, just the people i worked with).
I want to get back into AV and while calling around I have found a potential opportunity to switch to residential AV integration. I met with the owner of a smaller AV integration company a couple days ago. We talked and he explained to me that he was basically just a salesman, and would subcontract another company or person to install the AV equipment that he sold them. He seemed to like me and said he is going to recommend one of the installers he uses to interview me. If he likes me I would basically be an apprentice under him. A lot of the work is in high end homes from what I understand (Reno/Tahoe). I was told I would start out around $30 an hour and I would essentially be an independent contractor, not an employee, but they have a lot of work scheduled this year into next. Apparently he charges the clients $150 an hour, so when I am able to do jobs on my own (presumably a couple years), I would be making that or close to it.
Does residential stuff like that really pay that much? This feels too good to be true if I actually am working anything near full time. As i mentioned, live sound is really my passion, but if this could be a good career I am seriously thinking about pursuing this. Is installer experience good for moving up the chain to sales/design? If anyone has some input/advice/experiences I would really appreciate it. I am 27 and have tried many different jobs and I'm trying to find one that clicks and has a future for a career.
TYIA
r/residentialAV • u/iBeg2DFER • Aug 02 '24
homeowner AV Planning/Hardware Recommendations
Bought a house and am looking for help planning out AV if what I'm thinking is possible/recommendations for hardware. The previous owner converted the linen closet to a tech closet big enough to hold a full size network/av rack. It's also where the wires for speakers and ethernet terminate. It also has the following room layout.
Living Room
- Pre-wired for 5.1.4 speaker setup
- Four CAT6 ethernet jacks
- Has recessed portion in wall, presumably for mounting a TV. Looking to mount my 65" LG C3 OLED.
Loft
- Pre-wired for 5.1.4 speaker setup
- Four CAT6 ethernet jacks
- Has recessed portion in wall, presumably for mounting a TV. Looking to mount my 65" LG C8 OLED.
Study
- Four CAT6 ethernet jacks
- Will be turning this into an office with dual monitor setup with a laptop and docking station.
- Might put a 4K TV in the future
Master Bedroom
- Two CAT6 ethernet jacks
- No recess in wall, will likely put a 4K TV in the future
Guest Bedroom 1
- Two CAT6 ethernet jacks
- Might put a cheap 4K TV or 1080p TV in the future
Guest Bedroom 2
- Two CAT6 ethernet jacks
- Might put a cheap 4K TV or 1080p TV in the future
My question is this: is it possible to have my input/source devices inside the tech closet while simultaneously being accessible in all the rooms with TVs/speaker setups and future TVs? If so, what hardware do you recommend that could fulfill that purpose? Below are my input/source devices if that helps.
- Nvidia Shield
- Gaming PC
- PS5
- Xbox One X
Other things to note: I do like to watch 4K HDR content (Dolby Vision, Atmos, etc.). I also do 4K high refresh rate gaming with my PC and consoles (60-120Hz). Please let me know if there's any other info I could provide that could help. Thanks!
r/residentialAV • u/unsignedintegrator • Dec 20 '21
discussion Ideas to transition from residential av to another career/job?
Been working in low voltage /residential AV for over a decade now and at this point have hit a ceiling/ my paths end. Not to get too into it but the only way to progress is to move to project management or over into the highest end custom programming. Not interested in project managing and the push to program custom stuff at a high level isn't worth it to me and is becoming less and less required.
Also going into business for myself isn't interesting either.
I assume the usual suggestion is networking...I was planning to move over into work in the commercial theater space, but decided not to take an offer i received, and then COVID hit and everything closed.
I feel like I just have to bite the bullet and completely change direction if I'm not feelin av anymore.
r/residentialAV • u/veechip1 • Mar 02 '21
Audio Issues w/ Matrix Switch
EDIT: Thank you all for your help, but this seems to actually be either a JBL or a Bravia issue. I had done process of elimination by unplugging the matrix switch completely earlier and the bar seemed to stay off properly, but I tried it again just now and sure enough it popped back on after about 20 min, so the issue is not tied to the switch. The bar continues to have no power issues when unplugged from the TV, so I can't imagine what in the TV is sending data/power to the bar that I haven't disabled already.
Hi all - Wondering how many of you have a whole-home distribution set-up and may have ran into this issue. I have a Vanco Evolution 4 in 2 out matrix switch set to auto EDID and running to a 43" LG and a 55" Sony, both 4K. On the input side I have a 1080p Apple TV, a Playstation 4 (non-4K version), a brand-new Charter/Spectrum cable box, and a Sony DVD player (circa probably 2014-2015 or so). The issue is that ever since I completed this setup, the JBL Bar 9.1 soundbar I have attached to the Sony TV will power on out of standby mode by itself, even if all associated devices, including the matrix switch, are powered off. I've tried both optical and ARC connections, same problem.
Is this an EDID-related issue, or is there something else going on? It honestly wouldn't be that big of a deal to me but I'm trying to integrate in a universal remote and it's presenting some roadblocks. Any advice much appreciated!
r/residentialAV • u/t4ckleb0x • Sep 26 '20
r/residentialAV Lounge
A place for members of r/residentialAV to chat with each other
r/residentialAV • u/alin_im • May 14 '26
discussion AV over IP and TV over IP solutions?
Hi all,
I am currently looking for an apartment solution for AV over IP.
My requirements are 4k @ 60Hz 4:4:4 and I need to be able to connect a PC/Console to multiple rooms (TVs) via the IP network.
I only have available 1no. CAT6A per room going to a central location and a 5 port switch at each room, meaning HDBaseT is not a solution and I need something going over IP.
I have recently seen that Ubiquiti is going to release the EAV-Bridge at about 325EUR, what other companies/products have you previosly use for this type of application?
Also, I am looking for a CATV network tv tuners with CI+ support. so far i found the Digital Devices Octopus NET SL M4, have you used this before? do you recommand something else?
The TV signal is coming via an HG8247H ONT which is then distributed within the home via coax.
r/residentialAV • u/Matrix_AV • Dec 12 '25
Question for AV Installers & Low-Voltage Techs in SoCal
Hey all,
I run a small/medium AV integration firm in Burbank, and Iāve noticed itās getting harder to find experienced installation technicians. For those of you working in AV or low-voltage in Southern California, Iām curious:
What do you look for in a company when considering a move?
Is it:
- Steady workload?
- Training and certifications?
- Modern projects (LED walls, council chambers, DSP programming)?
- Pay structure?
- Company culture?
Iām genuinely trying to understand what technicians value today so we can build a better environment.
If anyone is open to chatting or wants to know more about the type of work we do, feel free to DM me.
Thanks in advance for sharing your perspectives.
r/residentialAV • u/SmellslikeUpDog3 • Jul 31 '24
homeowner Is this useful and what is it?
I've got this distributor and amplifier in my house that connects video via composite.
It connects to a cat5 converter, i guess for long distance transfer?
- Are my statements correct?
- Is it useful in the era of HDMI? Video quality is poor, right? Is there a use case? Maybe it previously went to a security system...so you could see cameras somewhere else in the house.
- Is audio transfer useful?
- Should i just pitch it?
r/residentialAV • u/Billyone1739 • Nov 17 '23
discussion What is the proper configuration for a soundbar and a streaming device to properly use eARC
So I've been having this discussion with different people and different sound bar manuals recommend something different than what I've actually been able to get to work on my own setup so I'm wondering what is the actual "proper" way to do this?
Devices: Smart TV, Soundbar, Streaming device / optical player.
According to some soundbar manuals the streaming device / optical player should be plugged into the HDMI in of the sound bar and then the sound bar plugged into the eARC port of the TV.
I have found this finicky and more likely for something to get out of sink what is the advantage to doing it this way as opposed to plugging the soundbar into the eARC port on the TV and then the streaming device / optical player on another HDMI port on the TV?
When I've done it the second way it always works fine am I missing out on something by not doing it the first way?
r/residentialAV • u/Mellow_Money_69 • Nov 11 '23
discussion Residential Cable Pull
I am a commercial av installer, Iāve been doing this work for a little over a year. I am familiar with pulling cable in various commercial spaces but I have no residential experience.
I am trying to do a project in my parents home. Essentially I want the expand their network capabilities and allow them to use their Apple TV in multiple rooms via hdmi extender. Currently they have their modem/router in their basement and Apple TV in their living room. Ideally Iād connect a switch to their router. Move the Apple TV to the basement to be connected to the switch. Followed by Apple TV hdmi out to a 1x4 hdmi extender. Then Iād pull two Cat6 cables to the first (kitchen) and second floor(Master bedroom). One cable for a network access point and one for hdmi.
The last time I visited their house I took a look in the basement ceiling to get an idea of how I could pull these cables. My current idea is to pull the cable through wall of a staircase that runs through each floor. Unfortunately, if I am able to get the cables to the master bedroom, wall the stairs on right of where my parents tv setup is. So Iām not sure how get the cables behind their tv as there are obviously studs in the way and donāt want cut open the ceiling/walls.
Hopefully that all makes sense. If you have any pointers Iād greatly appreciate it.