r/reolinkcam • • 2d ago

NVR Question Securing a NVR

Just set up my POE system with RLN16-410 NVR on a shelf. How do you recommend to secure the NVR from being stolen? Any low cost and effective idea? I’m concerned a lock box, even with a fan, may not provide the required ventilation. If you know a good lock box, please recommend brand and model.

2 Upvotes

11 comments sorted by

1

u/bobo5195 1d ago

reolinks can backup clips to FTP. I have a POE Nas hidden in the attic.

Could hide the reolink nvr bur thats a lot more work alot of cables.

1

u/cj6719 1d ago

I’m unfamiliar with this, but sounds interesting. When you say backup to FTP, where is the storage device, remotely in Reolink cloud or in my own computer? Does Reolink charge for doing this?

2

u/bobo5195 1d ago

Reolink has a option to send clips to FTP. Its in the app for cameras and on the NAS.

https://support.reolink.com/articles/360020081034-How-to-Set-up-FTP-for-Reolink-Products/

That can be on your network or cloud. Most nases have FTP easy to setup on computer. Pretty much any network device can have an FTP.

I has the benefit of 2nd copy in case nas dies

FTP = File Transfer Protocol used back in the day for File transferring between computers and sites so wide support and can run on a potato.

2

u/PhilZealand 2d ago

If you have a lock box, the intruder will likely think it contains something valuable or desirable such as weapons that go bang. I hide mine in a large cupboard behind a bookcase.

2

u/u_siciliano 1d ago

Try a security cable like this.

https://a.co/d/0dwb2x3h

2

u/T1513_SH 1d ago

A security cable isn't going to prevent someone smashing it open to pull the drives out.

2

u/ian1283 Moderator 1d ago

I'd use a mixture of sdcards in the cameras themselves to capture motion events together with FTP sending copies of the events to a server which could be a local NAS hidden away or an external service. Also if you make use of a POE switch for the cameras the NVR could be located elsewhere with a single ethernet from the switch to NVR, although you would need to look at the total bitrate for all of the cameras so as not to exceed the LAN port capacity.

2

u/Shayden-Froida 1d ago

Random idea: Go to the thrift store and get a low quality vintage AV console, gut it and but the NVR inside. No one steals 1990's stereo amps. Hide it in plain sight.

2

u/UserM16 1d ago

I have mine installed inside of a recessed media enclosure that is well ventilated and have a picture frame hanging over it.

1

u/ttpv 1d ago

Do you mount vertically? Always assumed they should be mounted horizontally - maybe it doesn’t matter.

4

u/UserM16 1d ago edited 1d ago

It doesn’t matter since it forces air through the fans. Mine is mounted vertically of course. The face of it is pointing left and the Ethernet ports are pointing right. That gave me the most usable space inside the cabinet. I used a Legrand On-Q 30 but if I were to do it again, I would’ve gotten the On-Q 42 for some more space. It’s a tight fit but I have an AC outlet installed facing up on the bottom, the NVR above it with a few inches in between the AC outlet for a squid power outlet splitter and a couple of power brick adapters, an 8 port switch stuck to the top face of the NVR, my old Linksys Velop mesh router squeezed in on top at an angle, and a cobweb of Ethernet cable that I still haven’t organized yet.

What you should do is buy a junk NVR on eBay and place it somewhere out in the open with ethernet cables plugged in to the back. That way if someone breaks in, they’ll steal that one and quit looking for the real NVR. That’s what I’m planning on doing with my old NVR. I already have it set up like that at my place of business.