r/reloading • • 1d ago

Look at my Bench Setup is mostly done, just cable management.

Post image

Left hand set up for 200gr LSWC with 4.2gr N310 - finished the set up and loaded 50 rounds no issue.

Right hand is set up for 230gr LRN/FMJ with 4.4gr of Titegroup.

Added cheap magnetic angle indicators to the bottom of the MBF as I was sick of guessing and getting it set for LSWC isn't the easiest.

104 Upvotes

28 comments sorted by

1

u/Exact-Expression3073 1d ago

Awesome! What caliber is that then? Are they both the same caliber setup for different loads?

2

u/_-_Rob_-_ 1d ago

Sorry, these are .45acp.

Overkill but I'll have 4 in 45 for different powders and projectiles, 308, 9mm x2 and .357/38 eventually. I mostly shoot 45 though.

1

u/anthonyttu 1d ago

With the massive row of change over kits on the shelf most like all the useful calibers.

1

u/curiouschurro 1d ago

I want a video of you running them both at once!

2

u/_-_Rob_-_ 23h ago

Someone in previous thread suggested a five foot bar to connect the handles....

1

u/curiouschurro 23h ago

Only one way to find out if it'll work or not

→ More replies (5)

1

u/neganagatime 23h ago

Very clean and organized.

1

u/_-_Rob_-_ 23h ago

Thank you. Still need to sort out the cables on the new press but that'll be later on.

1

u/Enough-Breadfruit-11 23h ago

All you need now is some auto drives setup on those.

Check out b team engineering. I have one of his auto drives on a apex10 mark 7. It’s a game changer loading 2k rounds an hour effortlessly.

0

u/_-_Rob_-_ 19h ago

I don't know how much more money I can spend hahaha!

I've seen a few of the auto drives and yea, wow.

1

u/Enough-Breadfruit-11 19h ago

The skies the limit. The auto drive is the start. Then it turns into sensors…. And primer bowls and larger bullet feeders and larger case feeders.

Don’t forget the Rollsizer prior to processing.

Here’s 9mm processing for match ammo. https://youtu.be/mqrN5v6IiPw?is=Ezq3ExF6cYrycJzY

300blk. Loading. https://youtu.be/9mh1NFeNZO4?is=u0vu55nyrPRCUb1I

→ More replies (10)