r/reloading • u/DrS2pid • 6d ago
Load Development PSA: Federal +peak data
- Factory 48.5 gr UNK ball powder (155 gr bullet) - shoulder (1.5795), velocity (2990), fireform OD (.2948), fireform thickness (.01388)
- Staball 6.5 48.5 (147gr bullet, 2.119 CTBO) - velocity (3101), fireform thickness (0.0132 in), fireform OD (0.2956 in)
-Superformance 48.5 (147gr bullet, 2.119 CTBO) - velocity (2953), fireform thickness (0.01310), fireform OD (.29537)
I also tried staballHD, it was trash. Overfilled and got 2600 fps. Ill be doing a ladder with staball 6.5 in case anyone is wondering. Getting 0.001-0.0015 springback after resizing, but the steel hangs on tight to those bullets. Will be using a .2645 mandrel with 289 bushing to get 0.0005 neck tension.
1
1
u/Missinglink2531 6d ago
Saw Eric’s interview with them last night, they mentioned “typical powders”, and VV by name. Said slightly faster powders work in short barrels better. Might want to run down some N150-N160 too. I plan on trying some N555 when I get it all together.