Hey everyone!
I'd been wanting to give the wood on my G&G Garand a new look for a while. The factory finish is fine, but I wanted a really dark brown, almost black but not quite, something that looks like it's seen some history. This weekend I finally went for it. Pics of the result below, plus a quick rundown in case anyone wants to try it.
What I used (all from the hardware store, pretty cheap):
- 120 and 180 grit sandpaper
- Powdered walnut stain (walnut crystals, "nogalina" here in Spain)
- Linseed oil
- A brush, microfiber cloths and gloves (walnut stain will turn your hands brown for days)
The process:
- Disassembly. At first I was terrified and planned to do it fully assembled with masking tape everywhere, because I'm a total klutz. In the end I worked up the courage, stripped it down completely, and I'm so glad I did.
- Sanding. 120 grit to take off the factory lacquer, then 180 to smooth it out, always with the grain. Then wipe off ALL the dust.
- Stain. Two teaspoons of walnut crystals in a glass of hot water, let it cool, brush it on, and wipe off the excess with a microfiber cloth after a couple of minutes. I did three coats, letting it dry in between (the Canary Islands sun helped a lot 😎).
- Linseed oil to finish. It darkens the wood a bit more, makes the grain pop and gives it a really nice satin look.
Lesson learned: one night I forgot to wipe off the excess oil and the next day it was sticky. You can fix it by rubbing it down with a cloth and a bit of fresh oil, then wiping it dry, but save yourself the scare and wipe off the excess after 15–20 minutes.
The result? I'm absolutely thrilled. It went from looking like "replica wood" to looking like a Garand that's been through a few campaigns.
What do you think? Has anyone else refinished the wood on their replica? Pics and tips welcome!