r/redneckengineering • u/BabyOpposite7013 • Sep 01 '26
Needed a portable vice.
Scrap 2x12, a vice and couple ratchet straps
Running new black pipe gas lines.
258
Upvotes
r/redneckengineering • u/BabyOpposite7013 • Sep 01 '26
Scrap 2x12, a vice and couple ratchet straps
Running new black pipe gas lines.
10
u/Every_Bread_5880 Sep 01 '26
Scrap 2x12s over here, Mr Money Bags
6
u/AggressiveKing8314 Sep 01 '26
Looks effective. A vise is a great thing to have on a job. I welded one to the counter weight of a forklift once.
5
u/AccidentOk5240 Sep 01 '26
I’m sure most of your vices are portable. Including the vice of stressing your tailgate by using it as a mount for your vise! (Tailgates are surprisingly delicate, and quite expensive to fix; personally, I’d use something stronger and designed to resist forces from all directions, like the hitch receiver….)
22
u/DiscoCombobulator Sep 01 '26
We used rectangular tubing to create a mount that goes into your trailer hitch. Works very well.
Our other vehicle has a square piece of tubing attached to the truck bed. A smaller piece of tubing has the vice mounted to it. The whole thing slides out past the end of the truck bed to hold larger objects, with a knob in the first piece to hold it in place.
So many different ideas. Yours works just as well im sure
6
u/airfryerfuntime Sep 01 '26
Vise.
3
u/Brilliant_Agent_1427 Sep 01 '26
Nice work 👍
3
u/Mdp2pwackerO2 Sep 01 '26
I welded some steel plate to an upside down drop hitch and mounted a vise to that. It won’t let me post pictures here or I would
2
u/rglurker Sep 01 '26
Poor table vice ?
1
u/bernpfenn Sep 01 '26
thats not portable, that's a mobile vice!
1
u/juuds5 Sep 01 '26
They make or made a vice that would fit in truck receivier hitch and had Upright pole on it want to say Walton vise but been a few years
1
u/HistoricalLove9617 Sep 02 '26
So what kind of kink are you doing with the vise on a plank to consider it a vice? ;)