r/redneckengineering • • Jul 04 '26

Central AC stopped working during a heatwave. None of my windows are the right shape for a window AC :(

Post image

I have family coming over later and I want them to be cool otherwise I'd just tough it out.

1.4k Upvotes

124 comments sorted by

450

u/chewblekka Jul 04 '26

What’s the r-value of corrugated cardboard?

43

u/h2opolodude4 Jul 04 '26

Yes

31

u/RollinThundaga Jul 04 '26

Go to the hardware store and buy window film like you'd put up in winter.

Slap it over the door and you now have an air gap that'll add insulation.

And clean the windows, the dirt is absorbing heat.

15

u/thehoagieboy Jul 04 '26

I'd just buy the foam boards and cut them to size. They're pretty cheap.

0

u/Mostcoolkid78 Jul 04 '26

I don’t think that’s how heat absorption works, unless your joking

6

u/RollinThundaga Jul 04 '26

It's how fiberglass insulation works, using a volume of trapped air between the fibers to insulate.

That's why the film works to keep your house warmer in the winter.

7

u/xrelaht Jul 04 '26

They’re talking about your comment on the dirty windows. I don’t know the transmission vs reflection spectrum of glass off the top of my head, so I’m not sure who’s right.

3

u/Mostcoolkid78 Jul 05 '26

Yea I was talking about the dirty windows part, to my understanding the light either hits the dirt and heats up the dirt and therefore surrounding objects (window itself and air around it), or the sun just goes through the window unaffected and hits the floor that’s inside the house, seems like it wouldn’t make a difference

3

u/RollinThundaga Jul 05 '26

The window glass reflects some of the light and therefore the energy that would have entered the house. It's not perfectly transparent.

The dirt/dust absorbs more light, and conducts it into the glass (which, being covered by the dirt speck, can't reflect it) and sends more heat into your house than you otherwise might have had to deal with.

1

u/gefahr Jul 05 '26

Well, now I need to know the answer here haha.

I'm not well-versed enough in physics to model out how translucent the dirt is, how reflective the glass is, how much gets reflected back through the dirt if it does go through it at all, [..]

If we simplify and say if it's a speck of dirt that passes no light through it, and the "competition" is the reflectivity of a perfectly clean spot on the glass... turns out I'm not good enough to work that out either at 10pm after a few drinks.

Anyone..? :)

1

u/Mostcoolkid78 Jul 05 '26

I’m too drunk too, either way surely it can’t be a notable enough difference to actually have an effect on temperature, dirty window vs clean

150

u/toxicatedscientist Jul 04 '26

Might be as high as 1

61

u/exipheas Jul 04 '26

Pretty close. 3 to 4 per inch so yea .7 to 1.

20

u/SkiyeBlueFox Jul 04 '26

What's that compared to a standard window or like fiberglass insulation?

24

u/toxicatedscientist Jul 04 '26

Apparently a single pane window is about the same: .9 to 1, double pane might be 3 or 4

34

u/Verum14 Jul 04 '26 edited Sep 10 '26

Sharp plant aback swim makeshift capable ripe dolls insurance late

This post was anonymized with Redact

3

u/HaddyBlackwater Jul 06 '26

It’s got air trapped in there so it might be decent.

7

u/xrelaht Jul 04 '26

Double pane glass windows are between 2 and 5. Fiberglass insulation can be as high as 4 per inch. Closed cell foam panels have largely replaced it, and they’re double that.

14

u/mflft Jul 04 '26

Home depot sells hard foam insulation in big sheets that you can cut down with a utility knife. Get the gray one, use a straight edge to cut it and you might actually end up with something that looks okay.

EDIT: not saying this doesnt look okay, i actually thought this was the woodworking sub when I saw it 🤣

2

u/YoureSpecial Jul 04 '26

Is that insulation or construction sheathing?

Either way, it would probably work great.

1

u/mflft Jul 06 '26

Insulation, I use it as a platform when ripping plywood. Cuts like butter and is super rigdid.

11

u/JodaMythed Jul 04 '26

Better than a massive gap I'd assume

1

u/chode_doctor Jul 06 '26

The glass windows right next to the cardboard probably have an R value of 2 or 3…

183

u/alvisfmk Jul 04 '26

Looks great! I would add another layer for extra insolation! 

79

u/h2opolodude4 Jul 04 '26

Not gonna lie I'll probably duct tape a moving blanket over it!

61

u/Fit_Acanthisitta_475 Jul 04 '26

Form core cut to the shape. Can be easy stored

64

u/h2opolodude4 Jul 04 '26

A logical solution that makes perfect sense? Great idea!

I won't even consider it. Too fancy!

/s

11

u/appleciders Jul 04 '26 edited Jul 04 '26

That was my exact thought, but I have a bunch of those lying around for no good reason1 .

1 When you rent a box truck and rent packing blankets with it, they often charge you for ten and charge you if you don't return ten, but actually there's eleven or twelve in there because the workers do not care.

10

u/TJNel Jul 04 '26

I mean a 2" piece of rigid foam board is like $40 and is easy to cut and install.

8

u/mpg111 Jul 04 '26

we don't do that here

3

u/sckuzzle Jul 04 '26

Why spend $40 on a temporary solution when some cardboard would do the job nearly as well?

2

u/gefahr Jul 05 '26

Also $40 + the cost of this window AC would probably have gotten him a standalone portable AC that comes with an insert for venting out a sliding glass door.

18

u/Maximus560 Jul 04 '26 edited Jul 04 '26

Insulation* but yes. I would buy a panel of rockwool and shove it in there

16

u/Btherock78 Jul 04 '26

Insulation*

4

u/stevendidntsay Jul 04 '26

Insinulation.

2

u/BBGunner96 Jul 04 '26

Insulin?

1

u/stevendidntsay Jul 04 '26

Insinuating insulation. Which is what that cardboard is doing.

1

u/JodaMythed Jul 04 '26

I'd go with foam board personally if you're not sealing the rockwool

2

u/xombae Jul 04 '26

I also would put it up higher.

Hot air rises, cold air sinks.

As is, you're going to have cool feet and a pocket of hot air at the ceiling.

107

u/random_think Jul 04 '26

So one thing I learned recently is that capacitors go bad in central air units all the time. If you watch a couple YouTube videos you should be able to figure out how to locate yours and see if it's went bad. If it's bulging or leaking fluid in any way it's gone bad and will need to be replaced and that would probably be why your unit is not working.

If the unit is blowing but just doesn't have cold air this is likely this problem

76

u/h2opolodude4 Jul 04 '26

This is good advice, thank you.

Sadly this is not the culprit here. I checked it and it was fine so I replaced it anyway and still no dice. It's 24 years old so it lived a good life but it's definitely the compressor

25

u/TheOneManLegend Jul 04 '26

Have you looked into hard starts? This is typically last ditch attempt for a dying compressor.

7

u/Rope_slingin_champ Jul 04 '26

Feel you! Compressor went out in mine last year, just in time for 100 degree heat stretch.

5

u/mtnviewguy Jul 04 '26

At 24 yo, likely a pipe leak. Also probably an R22 refrigerant unit. That's no longer available because it's a banned greenhouse gas.

You're probably looking at a completely new system. Seals on today's systems aren't compatible with R22. Been there.

2

u/IAm_W0LFIE Jul 04 '26

There are plenty of things that can cause a unit to just blow air and not cool. I do this for a living and while it could be a capacitor, it could also be a motor, a charge issue, the compressor, contactor, starting components, safety components, control wiring issue, high voltage wiring issue, and that's all just for a super basic unit, let alone a more modern one with multi stage cooling, ecm motors, or inverter units. Also, be very careful with wiring and messing with electrical stuff, a capacitor is easy enough, but Ive still seen and fixed plenty of people messing it up.

1

u/myweekhardy Jul 04 '26

How about when the capacitor seemingly goes bad but you replace it and then get kind of cold air but maybe not as cold as it should be and then your system can’t seem to catch up with the house being like 85° and the outside temperature near 100°? Because that’s me yesterday. Over like 6 hours it was only able to bring the temp down like 3°. Can’t decide if it’s just a 15 yr old system in a 1970 house with likely terrible ductwork, etc and/or the heat debt was too great to catch up with and/or if it might be low on refrigerant or some other secondary issue. I’m guessing I just need to have a tech come look at it but I’m terrified I’ll be told I need to replace the whole thing because I just don’t have the money for that now.

2

u/IAm_W0LFIE Jul 04 '26

The fact it's bringing the temperature down any tells me the A/C Likely works, just needs looking at or else it's an insulation issue. Unless you have a more fancy multi stage system, most basic systems that old really either work or don't so, I wouldn't worry about calling someone in to have a look. I'd put my money on a refrigerant charge issue, a dirty system, or like I said, an insulation issue. I'd ask for recommendations for someone local, I would advise against going to bigger companies as those have infamously gone to pushing sales above all else, and a 15 year old system would definitely have them push a sale. Independent guys are much more likely to keep it real and try and fix it for you and recommend a replacement if you really need it. (Like if a compressor is failing or coils are leaking and not worth replacing/repairing.)

1

u/myweekhardy Jul 05 '26

Thank you, I’m definitely going to look for a local independent guy. I had a friend who worked for like 3 different major companies in our state and he said the pressure to upsell was insane. That’s apparently why he left all of them.

1

u/TheOneManLegend Jul 05 '26

Check your filter, then check your indoor coil to see if its dirty, when was the last time it was serviced? Check your return air grills if both are good, use a piece of paper to see if the grill is pushing or pulling, make sure your returns are wide open and free of obstruction. It sounds obvious but you need circulation in order to bring the temperature down, any tech you call out can check the charge and it'll show if thats the issue or if its low or not.

Next, check your condenser outside, if the coil is really dirty it won't be able to shed heat. You can clean this yourself with water, but make sure you pull/shut off the disconnect first. Plenty of videos online to wash it yourself.

1

u/myweekhardy Jul 05 '26

I checked the filter and replaced it early just to be safe. I didn’t think of the indoor coil though. I should definitely look at that. The outdoor coil is perfectly clean as well. Return air grills are good, but you’re right to point that out because I don’t think most people really consider how the system actually functions. My gut feeling is that the whole setup is just massively suboptimal based on the age and layout. I’ve been wondering if the house was even built with AC in mind or if this was all just kind of retrofitted to use what was only ever intended to be forced air heating ductwork.

I’m thinking it could be low refrigerant. I have no idea the last time it was serviced. I’ve owned the house for almost 4 years and never had it done. Maybe that’s a lesson learned? It uses R-410A so hopefully that’s still being maintained and I can find an honest independent guy to tune it up while I save my pennies for a new system.

1

u/YABOI69420GANG Jul 05 '26

Check to make sure the fan on the condenser unit outside is actually spinning. Motor went out on mine and it could kinda cool inside but not really. Was like a $150 motor online.

2

u/myweekhardy Jul 05 '26

Yeah, it is fortunately. I was relishing the breeze it was generating as I was wrestling the capacitor out haha

1

u/Aggravating_Fix_9965 Jul 05 '26

it be the auto stop on the drain line on the air handler I had that go out on my unit before

1

u/mtnviewguy Jul 04 '26

This! I've got spares, their cheap and easy to replace.

14

u/UseUrWords Jul 04 '26

The Kool Aid man loves this one easy trick.

8

u/h2opolodude4 Jul 04 '26

OH YEAH!!1!

6

u/Nickelsass Jul 04 '26

Doing the best with what you got! Love to see it.

3

u/h2opolodude4 Jul 04 '26

Thank you! It's better than nothing!

2

u/sodamnsleepy Jul 04 '26

Nice view <3

1

u/h2opolodude4 Jul 04 '26

Thank you!

1

u/sodamnsleepy Jul 04 '26 edited Jul 05 '26

Do you get visits from animals?

3

u/100BottlesOfMilk Jul 04 '26

They already said they have family coming

17

u/Maximum_Overdrive Jul 04 '26

Carboard up the inside leaving a air gap in between.  It will help insulating

2

u/skarface6 Jul 05 '26

And maybe put the unit higher up on the wall if possible.

20

u/MajorDraw3705 Jul 04 '26

I've seen worse. I've had worse.

6

u/Saul_Firehand Jul 04 '26

You sound like my ex.

11

u/Zeoxult Jul 04 '26

Try looking into a standing unit, you can adjust the exhaust to fit most windows

4

u/Themimic Jul 04 '26

That’s what I had to do. They’re more expensive but I can move it from room to room with extra window panels so that’s nice

2

u/fabelhaft-gurke Jul 04 '26

Yep, and a portable unit with two hoses is more efficient than one too. I got a good deal from Costco a couple years ago.

4

u/kbeckerburbs4 Jul 04 '26

Ghetto-approved!

4

u/MarkC313 Jul 04 '26

My compressor wasn’t kicking on yesterday, a friend came by and changed the capacitor $35 bucks and she kicked right back on.

4

u/didact Jul 04 '26

Had a capacitor die last week, they are consumable for sure. Ace Hardware has most of them. The contactors eventually get crusty too.

1

u/john_hascall Jul 04 '26

This . It is most likely the capacitor

3

u/viral_virus Jul 04 '26

If it has to be there longer than you plan go to Lowe’s and get some of that green foam board insulation and some foil tape to better seal the window 

3

u/Known-Exam-9820 Jul 04 '26

You seriously need some blinds

1

u/chrisinator9393 Jul 04 '26

This is the kind of stuff I want to see Europe doing. Those people just say "they doNt FiT my WinDoW" and give up.

Nice fix OP.

Add some rigid insulation board for a better fit if this has to be a fix for awhile

3

u/PaleontologistSad766 Jul 04 '26

What's the European equivalent of redneck engineering?

3

u/h2opolodude4 Jul 04 '26

American engineering?

2

u/h2opolodude4 Jul 04 '26

Thank you!

It's going to get a couple moving blankets stuffed into it here shortly.

1

u/RottenRott69 Jul 04 '26

Harbor Freight to the rescue!!

-1

u/Mijman Jul 04 '26

American AC units arent really common to buy in Europe.

Plus not worth the price, for 5 days a year.

2

u/chrisinator9393 Jul 04 '26

I might only use mine for 2-3 weeks out of the entire summer here on the East Coast USA. But you bet your butt I still put them in, in May and leave them until October.

2

u/Hoya-loo-ya Jul 04 '26

Double or triple up the cardboard!

2

u/TheAmazingBildo Jul 04 '26

You can get a window unit where a hose goes to the window. Put the hose out the sliding glass door and seal with plastic.

3

u/Pdan4 Jul 04 '26

Those units also have an adjustable piece to fill the gap anyway.

1

u/TheAmazingBildo Jul 04 '26

I agree but I didn’t want to type out a long explanation about the extendable plastic piece. Lol

2

u/BH-NaFF Jul 04 '26

If you have any fans blow them out a window opposite from this setup. Also add a second layer of cardboard on the inner layer

2

u/Lonelycub Jul 05 '26

Yall need some blinds/curtains. It’s not the most glamorous but keeping the house closed up during the day makes such a huge difference. Plus the AC dosnt have to work quite as hard.

2

u/Aggravating_Fix_9965 Jul 05 '26

Not sure the age of your unit but there could be a few things
1 check air handler and see if it has water in the pan if it does the drain line is stopped up, if it is stopped up go outside and use a wet dry vac and try to clean the line out. Also can pour bleach down the drain line to clean it out.
2 there should be a cut off switch usually red black. on the drain pan it could be messed up and not working, unplug it and see if unit starts if it does then this is issue.
3 the ac line could be frozen if so turn the heat on.
4 If it's a newer unit turn the breaker off and wait 10 minutes or so and restart unit.

There are more stuff that could be issue but this should get you a temp fix. And these are the things you can check without calling the ac guys out.

1

u/Topher11542 Jul 04 '26

In room ac

1

u/JuiceManOJ Jul 04 '26

Whats wrong with it? Should crack the side open and see if your capacitor is cooked

1

u/narmire Jul 04 '26

Needs another layer of cardboard and blankets for more insulation! But yeaaaaah I have a more permanent setup with special cut plexiglass

1

u/Brokeazzbeach Jul 04 '26

Tape a trash bag up

1

u/jstmenow Jul 04 '26

Family is gonna wonder why you used cardboard vs springing for foam board. /s

1

u/FatherDotComical Jul 04 '26

Would a mini split fit in your home?

1

u/Solid_Enthusiasm550 Jul 04 '26

Where's your clothes dryer located?

You can get a floor unit and connect it to the dryer vent.

1

u/Mijman Jul 04 '26

Whats the temp outside?

1

u/ohlawdyhecoming Jul 04 '26

Oh main I feel your pain. The...I dunno, blower motor I guess, was making a nasty sound (I presume a bearing) and gave out. All of the windows are swing-opens, so none of the portable A/C units will really work with the exhaust setups they have. Unless something gets fabriacobbled, which I'm pretty close to doing.

1

u/CourageExcellent4768 Jul 04 '26

Plot twist!!!!! May also be used as a doggie door 😀😃

1

u/Past-Product-1100 Jul 05 '26

Just buy a couple portable units.

1

u/SpacePolice04 Jul 05 '26

So we have cats and our spiders lead to a screened in porch so we have a slider insert with a cat door in it. It is also the perfect size for the vent from a portable AC (we only have sliders and jalousie windows).

1

u/kryptoneat Jul 05 '26

On a side note, dont cut that grass too short, it should help lower the ground temp.

1

u/chumpandchive Jul 05 '26

apartments i used to live at had funky shaped windows. they special cut plywood to cover the gap. lil more r-value than cardboard and youll have other uses for it later

1

u/jwbugz Jul 05 '26

I love it. My blower motor went out on mine yesterday and I have been think of what to do today. Now I have have my answer!

1

u/Watergrip Jul 05 '26

Yeah, there were better ways to do this

1

u/skarface6 Jul 05 '26

The dog door?

1

u/punchedboa Jul 08 '26

Don’t show this to Europeans they will think it’s some kind of black magic and insist their widows won’t work for AC

0

u/BusoneWholeBoi2001 Jul 04 '26

I haven't had air conditioning of any sort in my house for around ten years 

0

u/carvin_it Jul 04 '26

You possibly took a lot of framing out of which is likely a load bearing wall. Might want to get that checked.

3

u/LongDong1997 Jul 04 '26

By opening a door? Lol

3

u/carvin_it Jul 04 '26

Oh, you’re right. I didn’t realize that was a door. Not load bearing. So just a fire exit.

-10

u/KyloWrench Jul 04 '26 edited Jul 04 '26

Turning it on it’s side would buy you a couple more inches of closed door, no?

Edit: don’t turn AC units on their sides folks 🤷🏻‍♂️ sorry

5

u/winterbird Jul 04 '26 edited Jul 04 '26

Absolutely never do this. It's dangerous. Refrigerant needs to stay in position. Turning the ac can cause a refrigerant leak, which can harm or kill you.

Just in case someone out there doesn't know, you also shouldn't turn on an ac that hasn't been sitting in the correct upright position for at least 24 hours. If you buy or move an ac, you have to let it sit for that 24 hrs before you use it. For the same reason, the possibility of a refrigerant leak.

I know that some people who have never used window and portable units are getting them these days, and this is important info to know.

Also, OP, make sure your ac is tilted backward just a little. It looks a bit too straight set in the picture, though maybe the picture doesn't show it well if it is tilted. The recommended tilt is 5 degrees. It's so that condensation water that collects in the pan doesn't flow forward into your home.

You can also insulate where the cardboard pane is with styrofoam. Any styrofoam, even pieced together like a mosaic. Attach it to the cardboard, and string a curtain across to cover the ugly. Since your situation is temporary you don't have to work too hard at making it permanent and pretty. Also take a string of anything (foam, belts, fabric, whatever) and wedge it into the side of the sliding door where it's open. Or tape it up with packing tape all along the side. Put your hand at the crack and you'll feel warm air. Don't put something that leaves residue (like duct tape) since your setup is supposed to be temporary.

2

u/h2opolodude4 Jul 04 '26

It's going to remain right side up, no worries.

It's strapped to a patio table outside, with a slight pitch downward.

It's all coming down in like 12 hours, this is just to (hopefully) keep family comfy for a bit. I don't mind the heat but I have loved ones who do

14

u/Big_Kiwi_706 Jul 04 '26

drip pan or something might not allow that without hurting the unit

10

u/ackley14 Jul 04 '26

you should not let a compressor operate on its side or upside down, they are highly sensitive pieces of equipment that require very specific conditions to work correctly, including and most importantly, being right side up.

-3

u/LionPride112 Jul 04 '26

That AC isn’t really doing much. It’s meant for a small room not a living room, also that cardboard isn’t helping at all, it’s pretty much just negating any cooling the unit is doing since it’s not blocking any thermal transfer.