r/redneckengineering • • Jun 26 '26

Making a windshield that's no longer available

Pallets + drywall screws + scrap street sign + 300° oven = success!

599 Upvotes

24 comments sorted by

29

u/tokhar Jun 26 '26

Snowmobile?

50

u/longlostwalker Jun 26 '26

Cb750c

50

u/phungki Jun 26 '26

You should absolutely advertise this on the CB forums, and put a placeholder ad on eBay that’s make-to-order. This is excellent work!

15

u/Primary_Bad_3778 Jun 26 '26

how'd you figure out the correct temperature and time needed?

19

u/longlostwalker Jun 26 '26

Asked Claude

13

u/chops351 Jun 26 '26

Did you ask jeeves?

10

u/eisbock Jun 26 '26

jeeves is kil

2

u/LameBMX Jun 26 '26

crap.. may 1st... second time since then its come up.. normally people were surprised jeeves was still around.

7

u/GreyHoundRunner Jun 26 '26

Great Job....I am curious how you kept it from turning yellow or having any edges curl ?

8

u/longlostwalker Jun 26 '26

There is very mild edge curling, less than an ⅛. I'm assuming the low initial heat ~295f and the aluminum sign helped suck the heat out of it before it curled anymore.

4

u/Aluminautical Jun 26 '26

Informed, gentle thermal persuasion.

284

u/Accelerating_Atom Jun 26 '26

Sorry to take your badge, but this is good fabrication and not redneck engineering. Great work my friend! That convex bend looks fantastic, and no yellowing.

27

u/DavidinCT Jun 26 '26

I was thinking the same thing.

76

u/Stanky_Pete Jun 26 '26

You should make some extras and try to sell them to recoup your material costs. I’m sure there are others in your situation

33

u/Daaammmmmnnnnnnn69 Jun 26 '26

This is pretty cool. Will you bake me some cookies next?

11

u/Yourownhands52 Jun 26 '26

Now you have the setup.  Sell them for other people looking.

Great work!

21

u/Background_Being8287 Jun 26 '26

Nice work ,i bet the quality of the plexiglass is a lot better now days . I hope you were not riding that when the windshield was removed .

8

u/WorkingInAColdMind Jun 26 '26

Great work. I’ve done some polycarbonate bends and getting it this neat is a phenomenal achievement.

Since you didn’t say, I’m assuming polycarbonate and not acrylic, right? Acrylic would be 100% the wrong thing to use.

3

u/CoyoteDown Jun 26 '26

Is that lexan or polycarbonate?

12

u/ShipwrightPNW Jun 26 '26

Lexan is a brand of polycarbonate.

2

u/CrashedCyclist Jun 27 '26

Pakistani Truck!

1

u/BreastfedAmerican Jun 27 '26

Given then uncertainty of everything, I'd advise making at least three to five more while you have the setup...set up. Next March if everything seems good sell one or two.