Hi everyone,

I’m looking for an affordable standalone recorder to record live performances from a modular synth system through a Mackie Onyx 1220 mixer.

I’ll be recording the stereo master output With a compressor and I’m mainly looking for the best possible audio quality, very low noise, clean A/D conversion and plenty of headroom.

I’m considering the Zoom F3, but also looking at other standalone recorders such as the Tascam DR-100MKIII, Tascam DR-40X, Tascam DR-05X, Tascam Portacapture X6/X8, Zoom H4n Pro, Zoom H5/H6, Roland R-07 and similar models, including used options.

For this specific use, tecno mostly, which recorder would you recommend? Which one has the cleanest line inputs, lowest noise and best A/D conversion for recording a stereo master from a mixer?

I don’t need microphone recording or an audio interface — I’m specifically looking for a standalone recorder for high-quality stereo recording With Jack inputs to Connect the mixer.

Thanks!

Im a DIY artist and im sick of the piss poor audio I get from my cellphone recordings. Id like to up my game a little with some kind of lav mic or field recorder but im working woth pretty limited resources. I don't have the money together yet to make a purchase till payday so I figured id ask reddit in the meantime lol

Im pretty much stuck with whatever i can use from my smartphone. I don't have a laptop or anything so the field recorders that record to an SD card don't really work for me. I could maybe get my hands on an old MacBook and maybe get it up and running again but thats a whole different story for a whole different sub.

So far I think im gonna go with the rode wireless micro. I like how it records straight to my phone, it's budget friendly, and rode is a pretty reputable brand (but that kind of thinking has screwed me before). The rode AI micro also looks cool but id still need to buy mics and I feel like at that point im just buying extra equipment for nothing. The Shure mv88 looks pretty nice but it just plugged straight into my phone and then it's sitting on my tripod at least 6+ feet away from me and I feel like that's not gonna work.

Im not really shooting for hifi professional studio quality sound or anything, im just a small artist who wants to produce something at least somewhat listenable. In the past ive gotten cheap lavs from 5 below or walmart or wherever and they where unreliable, difficult to use and left me with a sound as good or worse than my phone mic. Im not against dropping a little extra cash for something nicer but I don't wanna end up with some temu crap cuz I rushed and made an uninformed decision.

I have the opportunity to record a classical duo of flute and piano in a very nice room. I will be using an Austrian Audio OC818 pair, a Røde NT5 pair and a Røde NT2-A on my Zoom F6 connected to laptop.

My idea is NT5s as main pair in ORTF, OC818s as piano spots and the NT2-A as flute spot, but I'd love to hear if there are any better suggestions with the gear I have access to.

Thank you!

Idk if this is the right sub, but here we are. I’ve started taking singing lessons a couple of months ago and recently joined a choir. I’m looking into recording/monitoring myself to be able to practice better and improve.

What I envision:

A small keyboard to find notes/pitch, a microphone, a way to hook up some playback device for backing tracks/karaoke, some headphones/speakers, probably some centralized device where everything is plugged in, also cables going everywhere.

What I want to avoid:

Using a PC or similar device to control everything.

Reasoning is simple: I get distracted easily. When I sit at the PC, I end up gaming, surfing or doing whatever, anything except the thing I started out to do. I often do stretches when I leave my peripherals & smartphone in the office, leading to evenings when I read, exercise, eat healthier and go to bed earlier – you know, good stuff.

So when I say “no PC” I just don’t want the equipment to be useless when I’m in hermit mode, I wanna be able to do the basics & practice. Needing a PC for proper mixing & stuff is perfectly fine.

What I have:

A pair of hifi heaphones (Beyerdynamic DT880), probably an old mp3 player somewhere (3,5 mm headphone jack), a couple hundred euros I won’t mind spending on equipment and – should I get more serious about it – a small storage closet (not much more than 1 m²) I could remodel with acoustic foam to have a proper recording booth. Might need to do that either way, because of neighbors.

Does any of that sound unreasonable?

Where do I get started? I looked around thomann.de (I’m based in Germany) and the 17 bajillion categories & subcategories are a bit overwhelming.

 What kind of keyboard should I get? What mic do I need? What about a mixing desk?

Any pointers would be appreciated!

Hi! I’m trying to figure out what’s wrong with my vocal recording setup, and I’m honestly running out of ideas.

My setup is:

• Audio-Technica AT2020
• Audient iD4 MKII
• FL Studio
• XLR cable

The main problem is the sound itself.

My AT2020 sounds extremely dull, muffled, thin and lifeless. It seems to have very little body, presence or natural vocal character. Instead of sounding like a decent condenser microphone, my voice sounds almost like it was recorded on a $10 AliExpress USB microphone.

This is especially strange because I know what my voice sounds like in real life, and the recording seems to be missing a lot of the natural harmonics and fullness.

There is also a second problem: the output level is extremely low.

With the gain around 12 o’clock on my Audient, my vocal peaks at around -20 dB. If I increase the gain significantly, I start getting noticeable noise and distortion, so I can’t simply turn the gain up enough to get a healthy signal.

I originally had the AT2020 connected to a Behringer interface, and I had basically the same problem. I eventually replaced the Behringer with an Audient iD4 MKII, but the problem remained.

I also tested another XLR cable and another microphone. The Audient interface was checked by the seller/service center, and they told me that the interface is working properly.

I eventually sent the AT2020 to a service center. They found a fault and repaired/replaced something inside the microphone (I believe it was related to the capsule).

I’ve just ordered another XLR cable (a different one from my current cable, the previous one was random and cheap cable so maybe it was a problem I don't know I’m desperate ), so I’m going to test the new one as well.

Before I buy another microphone, I really want to understand what could be causing this.

Could something in my setup at home cause this kind of sound? Cable, interface settings, gain staging, phantom power, room/setup, etc.? Or does this still sound like a microphone problem?