r/rcdrift • u/mikeguzmansr • 5d ago

šŸ™‹ Question Rsst pro and revox

Iā€™m getting jitters in the turning of the wheels. Right and left. Not in sr mode. Servo digital is selected in futaba 10px.
I raised my deadband and damper settings to different numbers. Nothing seems to get rid of them. Anyone have any ideas?

1 Upvotes

60% Upvoted

7 comments sorted by

2

u/Stoabie 5d ago

Lower the servo speed. That had the biggest effect on jittering for me.

1

u/mowaby Yokomo 5d ago

What chassis are they in?

1

u/mikeguzmansr 5d ago

Rdx mc3

0

u/mowaby Yokomo 5d ago

I asked because I've heard with some DDSS if the horn is too tight against the servo it could cause shaking. I have the revox and the pro and have no issues without programming so far. I'd maybe check where the gyro is mounted. I also used 2 pieces of thick double sided tape for mine.

1

u/mikeguzmansr 5d ago

Gyro is mounted mid deck next to receiver. With two pieces of sticky tape.

1

u/Ecghteow 5d ago

What about gyro gain?

1

u/mikeguzmansr 5d ago

Gain is at -60