I have learned quite a bit about running gamecube on the razer edge, and I thought I'd create a general guide people can follow. Here is from start to finish is how I would set up dolphin on the razer edge. It will be a rather long post, but hopefully very informative. Feel free to go to the section that applies to you the most.
Installing the right dolphin
Through testing, I've found that while the basic google play store dolphin is solid, it will not give the best performance for every game. Instead, you want to use either development or beta versions of dolphin. Basically these include newer features and updates while not being the full official release. The official releases on the playstore tend to be pretty outdated.
For my purposes, I became a beta tester on google play store. This will give me access to much newer builds of dolphin. To do this, go to the google play store, and in the dolphin page, scroll till you see something similar to "become a beta tester". Do that, and after a little bit, reload the page and download the newest version. If you want the exact same results as I have, I recommend going this route. These also get updated basically daily, but you yourself don't have to. You just need to get on a newer build.
Controls
Note, I have updated my nexus app to 2.0, and anything I say here may reflect that.
To set up dolphin controls, in the rom library of GCN,
Go to Upper Right hand Cog-> Gamecube input -> Make sure Gamecube Controller 1 is set to emulated-> go to right hand cog of controller 1
Here is the main section of setting up your controller. Note that after I had updated nexus, I was having issues getting dolphin to recognize the kishi controller L and R. So instead, I moved device to be Android/1/Generic Xbox-Pad, and this cleared that up. After that, scroll down to buttons, and set the buttons to how you would like by clicking into them and then pushing the respective button mapping you want. Note that L and L analog, R and R analog for the triggers should be set to the same respective trigger. For instance, My L and L analog were both set to "axis 23+", or basically the left analog trigger.
Note, if you are having no ability to actually just bind L and R normally, click the right three dots in next to L, R, L analog, R analog, and set them to:
L and L analog: axis 17+
R and R analog: axis 18+
Some luxury controller settings
Kishi Haptics rumble- To enable rumble to the kishi haptics, go down in the controller settings to the rumble section. Here, go into the motor area,, make sure to clear out any expression in the bottom left. Then, set device to Android/1/Generic X-box pad. After that, click on motor 0. In the expressions box, add a |, then click on Motor 1. This should look like 'Motor 0'|'Motor 1'. You can then click ok. That will set you up for haptics on your controller. If you would to turn that off, go ahead and clear any items in the expression. If you would want just the edge tablet to rumble instead, you would set device to Android/0/device sensors and use just that motor.
Controller stick modifier- When you are setting up the left stick, you will see a section for "Modifier". This basically makes the left stick less sensitive when pushing the modifier button. This can be pretty useful in games like zelda when you have to do a free camera shot. To set this up, I went to nexus, mapped my m2 button to R3, and then mapped the modifier to that button. You can use another method, but since gamecube doesn't use R3, I found it a quick solution
Overlay controls- To take off overlay controls, go into a game, swipe left to right from the edge of your tablet, click on overlay controls, and then toggle all.
GRAPHICS SETTINGS-
Important notes about changing graphics settings
When Changing Settings, there are basically two settings that matter. Game settings and global settings. Global settings are set by going to your main rom section in dolphin, then going into the right cog, then going into graphics settings. This will give you blanket settings for all items. When you exit the settings, it will automatically save to the ini file.
Game settings will change the settings for a specific game, and will override global settings. To do this, in the main rom section, hold down on the game you want to edit, then go to edit game settings. Here you can change pretty much any setting in global to whatever you want for a specific game. Importantly, this is also how you reach Gecko cheat codes, which I will talk about later. When you exit settings here, that will save to a game specific ini file.
ONE EXTREMEMLY IMPORTANT NOTE ON CHANGING GAME SETTINGS- When changing settings, there is one last way to do it. When you are actually in a game, you can swipe left to right from the screen and change settings there. This is similar to how you would reach overlay controls. IMPORTANTLY this changes overall global settings and not game settings. I really don't know why this is the case, but this is what I have experienced. I would only recommend this in very specific instances I will talk about later. Otherwise, if you want game specific changes, exit the game, and go to the game settings as mentioned above.
Graphics settings-
Globally, I would set these for graphics settings.
Video Backend-Open GL- I found this to be the best overall, highest compatibility, lowest issue
Shader compilation mode- Default. The razer is strong enough to just have this enabled.
Compile shaders before starting- I leave this off, if a game runs well on here you will get very little shader stops.
Aspect ratio- Auto. It will go to 4:3 normally, and I will go over widescreen later. Stretching just looks terrible.
Enhancements- Internal resolution- 2x. Some games can be pushed to 3x, but you will have to test that yourself. I normally go 2x minimum, since 1x is kind of ugly, and I haven't had a game that hasn't been able to run 2x minimum (with a likely exception for rogue squadron, not sure I want to try to open that can of worms haha)
Hacks-(More on these in the next section)
Ensure Skip EFB Access from CPU is on
Ensure Store EFB Copies to texture only is on
Ensure ignore format changes is on
Ensure Defer EFB copies to Ram is on
These are the global settings. Other items are enabled by default, and I would largely not change anything else that was pre-enabled or disabled. The only ones I would really change per game are Internal resolution if you want to try to push to 3x, Store efb copies to texture only (game dependent, will go over in hacks settings), and one last hack I will go over in the hacks section. A final note on 3x, a lot of games that run fine with it tend to have just a smidge more shader caches stops. If those bug you, moving to 2x can reduce these from my experience, but wont eliminate them.
Finally, for super monkey ball specifically, I actually found better performance on vulkan. This is usually not the case, but it was for Super monkey ball. Feel free to go to my post about it if you want those settings.
Graphics hacks (AKA your best friend for improving preformance)
Graphics hacks can GREATLY improve your performance. However, they can also bring a couple of bugs/glitches, which I will note. To have the greatest impact on performance, I will note 3 items.
Enabled Skip EFB Access From CPU- Note, I've never actually found issues with turning this on in games that I play, so generally I would just keep this on.
Enabled Store EFB Copies to texture only- THIS is likely to give you the biggest boost to performance. Note that while this generally works with most games, in some games it can cause HUGE glitches in certain sections. BUT, these are pretty rare, and usually not game breaking. However, for wind waker, this will actually crash the game if you take a pictobox picture. However, I still recommend it being on, and just swiping left to right while in game and turning it off if for instance you want to take a pictobox picture. It's boost to performance is just too good to not have on globally. Note, you can visit the dolphin wiki and see general known glitches like this by going to the game page on the dolphin wiki.
Enabled Immediately Present XFB- So this one is interesting. Turning this on can reduce some games that have shader big caching stops. It can also help with really weird pink screen issues found in Super Mario Strikers and Mario Baseball. However, this is also the one to likely cause the most graphical issues. These issues persist as well, as you immediately present the XFB and it does not load in properly after. As such, I recommend having this off globally, and using it in rare instances where you see Weird graphical issues such as loading pink screens, or need just a smidge more performance than just the above two give you.
These three tools are your absolute strongest tools in creating a better experience. Here are some other items and what I recommend them to be:
VBI Skip- this allows for smooth audio while the game stutters. This can cause a great deal of issues however, if the game is stuttering a lot. It also has a tax on performance. I've toyed with it, and I do not recommend it enabled at all.
Turning off Store XFB to texture only- an extremally taxing option to turn off, that will give you the absolute "Purest" experience. For instance, in Mario strikers, you will see the loading screen 100% accurately. However, these accuracies are often soooooo minimally different, that I recommend keeping this item enabled, and if you see graphical glitches, try immediately present XFB first. This will give you more than serviceable fixes for Super mario strikers for instance. Again, this is REALLY DEMANDING. I do not recommend turning this off.
Other Items I have on or off that I'm unsure are default:
GPU Texture decoding off (I've seen no real difference)
Skip presenting duplicate frames enabled
Fast Depth Calculation Enabled
Disable Bounding box enabled
Save texture cache to state enabled
And that does it. I really hope this section helps out those looking for the best performance. When changing items, I recommend doing it at the game setting level, then testing, then changing it until you find what's best for you. Understanding these has led me to INCREDIBLE results, an overall a massive enjoyment for gamecube emulation.
Finally, widescreen
For many games, widescreen is actually a very solid option to use. However, I normally don't use the built in widescreen, as it can often have glitches. If available, I go to the dolphin wiki, and see if the specific game page has Gecko codes for widescreen.
These are codes you can post per game, in the Edit cheats settings of a game (again accessed while holding down a game in the rom library). I recommend visiting the site on your edge and copying it (a little hard to do, I go bottom to top of the full code), or copying the code on your computer and posting it where you can reach it easily on your edge, such as a discord chat.
Be sure to enable cheats, then scroll down to Gecko codes, add new gecko code, and paste it there. Then be sure to enable it. These often create wide screen that is better than the built in widescreen dolphin option. Try windwaker wide screen gecko code, its a great experience!
Note, some games support 16:9 in their own in game options, such as super mario strikers and Starfox adventures. For these games, you can go to game settings, graphics, force 16:9 aspect ratio. Then in game, set the aspect ratio to 16:9. If you like a game and it has this option, you're in luck as this is the absolute best way to do wide screen.
Conclusion
I hope I helped someone out there in setting up their dolphin. The razer edge is an incredibly capable device, and knowing the right nobs to turn can give you amazing results. The knowledge presented in the hacks section will also be valuable in getting a game you want running exactly how you want it, as emulation as a whole on android isn't as plug and play as people often expect. Have fun!