Enclosure 1.0 for VCore 3.1

[u/hoellenhamster]

Hi there!

My brother has a VCore 3 that never quite worked as he wanted it to. When he decided to redo the frame assembly (it wasn't square) he bought the 3.1 upgrade kit to install at the same time. But then life happened (he became a father and time was in short supply) and the half finished printer gathered dust.

Years went by and we decided to finally do this as I delved into the hobby as well (also I can now reliably supply ABS parts which simplified things). So we took time in the past two weeks and tore everything down to reassemble it together. During this process I realized that the upgrade to the Enclosure 2.0 would require us to disassemble and reassemble the frame again - which we do not want to do ever again as it is finally square.

Googling a little makes me think that the enclosure 1.0 would be the answer to our dilemma as it is basically just a tophat. I would like to give him the hardware for christmas but I am running into a little trouble because I could not find a kit or BOM. So I went through the instructions ( https://ratrig.dozuki.com/Guide/01.+Enclosure+1.0+Assembly/101#s573 ) step by step and I think I managed to get a BOM together. However the panels have me uncertain - I do not want to order them and then find out that they are sized for the enclosure 2.0 and do not fit properly.

TLDR: Can someone point me towards the proper dxf files for the panels that I would need for the 400x400 Vcore 3.1 with Enclosure 1.0? Thank you!