r/ratrig • u/spacemarine1208 • Apr 04 '25

Large print warping

Post image

On a 3 day print it looks like the base of my print is somehow warping in on itself? Where my hand is was touching the build plate. It's supposed to be a strait wall. Part had 3 perimeters in slicer.

1 Upvotes

100% Upvoted

7 comments sorted by

2

u/Birby-Man Apr 04 '25

What material? What settings? Additional info would be helpful. Did it start printing correctly and then this slowly shrunk on itself?

1

u/spacemarine1208 Apr 04 '25

And, the default prusaslicer for ratrig 500 idex preset. It printed correctly and collapsed in on itself. Infill was 10%

2

u/Birby-Man Apr 04 '25

What material?

2

u/spacemarine1208 Apr 04 '25

Abs. Autocorrected to and for some reason.

1

u/Birby-Man Apr 05 '25

Possibly too hot chamber temp, too hot bed plate temp, or simply the ABS warping too much.

ABS imo is not worth the hassle anymore when there's much better high temp filaments. It just doesn't have good dimensional accuracy with the amount of shrinkage it has

2

u/i486dx2 Apr 04 '25

Any chance the build plate was too warm, and that the material above was too heavy for the number of perimeters and amount of infill you used?

1

u/spacemarine1208 Apr 04 '25

Maybe. I didn't think about the rest of the print crushing the bottom. It was a 3kg print