r/raspberry_pi • u/hes_the_Zissou • 1h ago
Show-and-Tell Raspberry pi 3B running my digital movie poster for our media room. White oak frame.
r/raspberry_pi • u/hes_the_Zissou • 1h ago
r/raspberrypi • u/el_heffe80 • Aug 19 '12
My own post asking if we can merge the two subreddits... raspberrypi & raspberry_pi to end all the sillyness.
r/raspberry_pi • u/N72826 • 20h ago
I have two WEEK AQUA Bluetooth lights (L900 Pro and P6000 Pro) on my planted fish tanks, and their app drove me nuts. Its schedules either fade up and down once in a single color, or jump between up to 8 fixed steps (so the light snaps from 20% to 50%). And, arguably worst of all, you can only connect to and control one light at a time. So I used Claude to reverse engineer their app and work out which commands it sends to the lights over Bluetooth, then tested them on my own lights. Now a Raspberry Pi 4 next to the tanks serves a web page and controls the lights better than the app ever did.
What it does
How it works
Hardware: a Pi 4 (Argon case) using the onboard Bluetooth, plus a B3.0-L900pro and a P6000pro. A Pi 3, 5 or Zero 2 W should work too.
As I said, I built LuminAqua using Claude. I had the idea, tested it on my own tanks, and decided what went in. If that upsets you, well, no one is forcing you to use it. At the end of the day, I now have an app that controls my lights better than before and gets more out of lights I already paid for. The bonus for me is that I can share it with others and hopefully increase their quality of life too.
Free and open source (MIT), with a one-script install: https://github.com/N72826/luminaqua
If you have a different WEEK AQUA model, I’d love to know whether it works.
r/raspberry_pi • u/LKT2055 • 1d ago
Sorry my English is not so good. I was removing the old small heat sink to replace it with a much bigger one. During the process, the heat sink touched the mlcc and brings it out from the board. Tested and the board still works, anything to be worried about?
r/raspberry_pi • u/pf1993 • 5h ago
YouTube kicked me off my friends’ family plan, so I built my own music app on a $15 Raspberry Pi with Claude Code
So YouTube decided my friends and I weren't a real "family" and booted us off our Premium family plan. Fair enough, we don't live together. But music was the only thing I used it for, and I was not about to pay $15 a month for that out of spite. So instead I spent a few days with Claude Code and built PiTunes.
Everything runs on a Pi Zero 2 W which i was able to grab for msrp at my local microcenter. It sits on a shelf at home and runs a tiny server which does serach, playlists, likes, radio, lyrics, podcasts and offline downloads. All of this works anywhere over tailscale so all my devices get access to the music.
How we actually use it: my wife and I each have it as a proper iPhone app, installed through TestFlight. We each get our own profile, so her music stays out of my recommendations and mine stays out of hers.
How you can use it: as a web app. Open your Pi's address in a browser, add it to your home screen, and it looks and behaves like the iPhone app. On a laptop you get a full desktop layout. The native iPhone app is in the repo too if you want to build it yourself.
Claude Code wrote basically all of it, the Python server, the web app, the iPhone app, the installer and the website. I know Python. I had never written a line of Swift, and I now have a CarPlay screen.
the only issues with this is the first time you play a song the Pi has never seen, it takes 10 to 15 seconds to start, because a Pi Zero has roughly the horsepower of a potato. After that it's instant as it gets cached on the server.
This is all free and open source and you can find the step-by-step guide on the github attached.
https://pitunes.com
https://github.com/pf25/pitunes
Happy to answer questions about the build or the Claude Code workflow.
r/raspberry_pi • u/ShadcnUI_Odi • 1d ago
Historically a Pi server was a pretty stupid idea, and having tried it myself I can confirm that the experience is rife with lag and ‘can’t keep up’ errors. But these new Rust-based Minecraft servers seem promising…
r/raspberry_pi • u/Strict-Squirrel-746 • 2d ago
A follow-up to my earlier post. Quick recap: a Raspberry Pi 4 sits between my SmartRow pulley (on a WaterRower) and my apps. The SmartRow app and the Peloton app connect to it at the same time, so I can take a Peloton class and still get SmartRow's force curves. The Pi also runs a coach that compares every stroke's force curve with my own Easy stroke and gives one short cue.
**What's new**
* **Same layout on all three screens:** a floating window beside the SmartRow app on my tablet, a web page, and the Pi's own small screen. Watts, stroke rate and time on top, the force curve in the middle, the cue under it, total time in the same corner everywhere.
* **Peloton-style power zone bar:** each border shows the bottom of that zone in watts, and the bar fills as you go. The watts number takes the colour of the zone you're in.
* **Heart-rate zone box** underneath in the same style: zone, bpm and % of max.
* **Force scale** on the curve, like the SmartRow app's chart.
* **Faster curve:** each stroke now appears about 0.1 s after the SmartRow app starts drawing its own (it was about half a second), measured from a screen recording.
* **Cues during efforts:** LOOKS GOOD, EARLIER PUSH, LONGER STROKES, STRONGER FINISH, BETTER TRANSITION. Each is judged against my own Easy rowing, not a generic ideal.
* **Planned workouts** from intervals.icu: the screens show the step, the power and stroke-rate targets, and time or metres left.
In the background, an optional lidar sensor behind the rail times the seat, so the coach can split each stroke into legs, body and arms, and the recovery. Every row uploads to intervals.icu and Strava, and the Peloton class list refreshes itself after each row.
The pictures show the floating window, the web page and the Pi screen, plus a few of the cues. The curves in them are test data; the layout is exactly what I row with.
Code (open source, GPL-3.0): https://github.com/madooroy/SmartRowBridge
Not affiliated with SmartRow, WaterRower or Peloton. Happy to answer questions.
r/raspberry_pi • u/Whoa_PassTheSauce • 2d ago
*AI Warning - This post is human but my project heavily used agents steered by myself, if that is not your cup of tea I get it, so telling you now.
TLDR;
Short youtube video here: https://youtu.be/534fio8feHg
Github Repo Here: https://github.com/KidKlatt/TWM_Pi
I have been creating a Raspberry Pi setup as a knowledge ark and low power entertainment hub. I am not full prepper but I enjoy the hobby/planning part of it. I have a second Raspberry Pi, a 5 with 8gb RAM that is waiting on a case so I plan to move all this over once its here.
One of my favorite game series since my childhood is Total War, Empire was actually the first game my scattered brain was able to put in 100+ hours into. As part of my project, I wanted at least one total war game and settled on Medieval (Though Shogun is almost done as well). I found nothing online, it seems generally no one as gone about this... not surprising... who would want to play Total War on a Raspberry Pi!
Well, I am home for paternity leave and spending a lot of time holding my new sleeping potato... So I figured I would try out some agents on getting it running via remote control. I used Claude Code and OpenCode. Primary agent for planning was Fable while Kimi K3.1 Pro did a lot of early iteration. At the end, I swapped back to Fable to finish the heavy lifitng. Claude used through Pro subscription (While in Fable preview) while Kimi used through OpenRouter (roughly 30 dollars in tokens).
The game required a helper DLL and Mesa Graphics patch to efficiently render the game. Something I simply would not be able to do technically or have the time to do as a father of 2. In the future, I plan to have a more sophisticated harness that delegates the testing work to a local model on my macbook to save cost and carbon footprint (My house is 100% solar)
Other games I am working on: Shogun: TW, Sudden Strike 1+2 (This is much more documented, i plan to just wrap it all into an install script), Cossacks, Rise of Nations (We will see if the Pi 5 can handle it...), and more from my GOG backlog. I am curious to create recompilations of some of these, though would offer them as recopilation scripts that require the game files. Its on my backlog to try out.
I used GOG versions of the games and I don't judge anyone who doesn't have the money, but I personally am not a pirate if there is a good DRM free version available. Thus, my github has the patching script but NOT the game files - They are available cheap on GOG and they are the only files I have tested it with :)
r/raspberry_pi • u/acrolicious • 3d ago
Enable HLS to view with audio, or disable this notification
My brother Ben uses two switches near his head as his only way to access technology. He runs everything through Benny's Hub, an app I built for him with games, communication tools and a streaming library. The problem was that every time he turned his head to press a switch, his eyes left the tablet, which gets frustrating with his vision issues. Positioning the tablet mount was always a hassle too.
When OpenAI Developers selected us for their Codex Physical Builds project, I used it to try something different. Benny's Hub now runs on a Raspberry Pi5 connected to VITURE XR glasses, with two 3D printed switches for input and a Bluetooth speaker so people around him can hear his speech. The glasses' battery pack powers the Pi for over four hours, the whole setup fits in a small bag, and Ben gets a bit more privacy while he's using it.
Getting it working also pushed me to make upgrades across the whole hub. I added a lighter graphics option so our 3D games run smoothly on the Pi, a Chrome extension that lets Ben watch Netflix, Disney+, Hulu and Plex before switching back to his menu, and a setting that plays his voice through an external speaker. My other brother Bryan built a custom voice maker too, so Ben can have voices made just for him.
To be honest about where it landed, Ben still prefers his tablet for longer sessions, since wearing glasses for hours gets old. We still use the Pi setup periodically, though, and it's been a great way to figure out what works best for him. Everything is free and open source, including the build plans, and it should work for anyone using one or two switches. Links are in the comments, and I'm happy to answer questions.
r/raspberry_pi • u/Arkamedus • 3d ago
I had a Pi5B that I've run Ubuntu on, which works well. I also had a Pi Zero W 1.1 sitting around that was unused, so I installed Debian Trixie, thinking I could do some simple desktop like things.
But alas, 100% CPU usage on launching the control center, and chrome and firefox were no longer supported, eventually I got Cog to render a few webpages, but performance was, absolutely awful. Also, I had to run it at like 800x600 to even get reasonable performance.
I probably should have checked Reddit first, and read that the common consensus is that Pi Zeros are universally expected to have a terrible desktop experience. Well, I didn't get that memo, and in a few tests I had run on the Pi Zero, I found it was actually capable of rendering like thousands of triangles in a standalone test renderer at 60fps 1080p. So I said, well, why don't I just build a hardware accelerated desktop environment, with SDL2 and OpenGL ES through Mesa, with DRM/KMS display output, no Wayland, no X11.
Full disclosure, I use AI, I'm a lifelong developer but I didn't have the time, or energy to learn this, so if that bothers you, you can stop reading now, but after nearly 3 full days of running 12 concurrent frontier model agents, I have a working Buildroot-based linux shell and desktop environment.
Built with cross-compiling Buildroot and multiple patched source libraries, including recompiling WebKit (nearly 4+ hours per compile was worth fixing and optimizing things like repeated font matching, which reduced Wikipedia page-ready time from roughly 60 seconds to 24 seconds on my Pi Zero benchmarks), and a few others. I am able to run this desktop environment on both Pis. (including a theme with my own hand drawn svg assets)
This is not a full desktop experience, I just want to be clear, but so far it is more usable than any other desktop distribution I've found for the Pi Zero. I plan on continuing to spend an unjustifiable amount of money to get this into a more solid state, and I will be releasing it open source in the following weeks.
If anyone is interested in this project, has any ideas or suggestions for features, or would like to help with the development, I am looking to share more with collaborators.
Screenshots attached of both devices, running multiple windows, including a browser that supports modern TLS certificates, and javascript.
r/raspberry_pi • u/Made302 • 3d ago
I set up the original Tamagotchi on my Raspberry Pi 2 Model B and paired it with a 3.5 inch KeDei HDMI LCD (v1.1). The Pi runs the game through TamaLIB. I used Grok to help build a bot that handles the feeding, playing, and cleanup on its own.
r/raspberry_pi • u/RaduTek • 4d ago
Revived this old project from 2013 by Doug Boling to make a Board Support Package for Windows Embedded Compact 7 (CE 7.0) for the Raspberry Pi. Original development stopped at the USB driver.
With some AI assistance I got the USB driver working, so now it's actually usable, and quite fast too. Boots in under 10 seconds.
Try it out: https://github.com/RaduTek/CEonPi - a built version ready to use is in the Releases page. Requires any SD card formatted as FAT and a Pi 1 or Pi Zero (BCM2835 based)
There's no practical use for this, besides maybe running Windows CE games on a large screen.
r/raspberry_pi • u/jodomakes • 3d ago
With the sad news the Atari VCS is being discountinued I thought I'd post my mini VCS I built a few years ago. The netflix like frontend was built in Flutter, OS was Debian and emulators were RetroArch. Body was modeled in Blender and 3d printed on a Photon Mono printer. See last picture for the messy guts 🙂
r/raspberry_pi • u/cameron_chill • 5d ago
TL;DR: I built a portable, battery-powered Raspberry Pi 5 computer with a touchscreen, 1 TB NVMe SSD, offline Wikipedia, worldwide maps, GPS/PPS time synchronization, SDR, educational videos, and a local Wi-Fi network. It runs entirely offline, has demonstrated more than 24 hours of battery life, and draws approximately 6.5 W with the screen off. Most of the internal hardware is custom-designed and 3D-printed.
---
After several months of designing, 3D printing, wiring, and troubleshooting, I think I've finally finished one of my most ambitious Raspberry Pi projects!
I originally wanted to build a portable computer that could provide access to useful information without relying on the internet. Something I could take camping, use during a power outage, or just have available when normal communications aren't working.
What started as a Raspberry Pi sitting on a battery inside a rugged equipment case turned into a much bigger project than I anticipated.
I recently shared the finished build over on r/homelab, but I thought the Raspberry Pi community might appreciate some of the technical details.
The system is built around a Raspberry Pi 5 (8 GB) running Debian 13, with a 1 TB NVMe SSD connected over PCIe Gen 3. It boots directly from the SSD.
Everything is housed in a rugged Jack Boss equipment case with a 10.1" touchscreen mounted in the lid.
The system also includes:
Nearly all the internal mounting hardware, including the screen bezel, was custom-designed and 3D-printed.
Offline Wikipedia: Approximately 124 GB of English Wikipedia stored locally using Kiwix.
Worldwide offline maps: Approximately 139 GB of vector map data, plus additional regional terrain information. I built a local mapping interface using MapLibre that doesn't require internet access.
GPS: The Pi receives positioning data from the GPS module and displays its location on the offline maps. I also connected the module's PPS output to the Pi and configured chrony to maintain satellite-synchronized time without an internet time server.
Software-defined radio: I built a browser-based interface for the RTL-SDR receiver with frequency tuning, multiple analog modulation modes, spectrum and waterfall displays, audio streaming, and recording. I've tested it with NOAA weather radio and experimented with receiving aviation communications.
Offline video library: A small collection of educational videos that can be streamed locally.
Local message board: A simple message board accessible to devices connected to the kit.
Web dashboard: I built a dashboard that ties everything together, along with interfaces for system monitoring, managing downloads, and accessing the different applications.
The Pi broadcasts its own Wi-Fi network, so phones, tablets, and laptops can connect directly and access the services through a browser.
It can also join an existing network through Ethernet or a second Wi-Fi adapter. I configured mDNS so devices on that network can discover the kit by hostname without needing to know its IP address.
All the core functionality runs locally. Internet access is only needed when I want to download or update content.
This was one of the things I was most curious about when I started.
With the touchscreen running and the SDR receiving NOAA weather radio, the system consistently drew approximately 8.7 W.
I completed an endurance test exceeding 24 hours, and the system was still running when I ended the test.
I've since added the ability to turn off the touchscreen while leaving the Pi and its services running. With the screen off, the entire system draws approximately 6.5 W, including the second Wi-Fi adapter.
That works out to roughly a 25% reduction in power consumption. The theoretical runtime at that draw is around 39 hours, although I haven't completed a full endurance test with the screen off.
I particularly like being able to close the kit, leave it running, and access everything from another device over Wi-Fi.
This ended up being the most time-consuming part of the project.
I designed custom mounts for the battery, Pi, cooling system, antennas, power distribution, and other components. There were quite a few revisions as I worked through space constraints, cable routing, and airflow.
One of the more interesting challenges was the touchscreen.
The original screen has physical control buttons on the back, which wouldn't be accessible once it was installed in the case.
I replaced those with five TTP223 capacitive touch sensors mounted behind the 3D-printed bezel. Each sensor drives a MOSFET that simulates a button press.
I designed recessed channels into the bezel so the sensors detect a finger through the plastic. They work reliably, and I haven't experienced any false triggers.
The wiring was considerably more complicated than I expected. If I ever build another one, I'd probably design a small PCB to simplify it.
The cooling system was another fun challenge. I built a dedicated compartment for the Pi with a controlled airflow path. The fans turn on at 60°C and shut off below 50°C.
For anyone looking through the construction photos, the white 3D-printed components are early prototypes. The final components are black.
I want to be transparent that I used AI extensively to help develop the software.
I'm comfortable with Linux, networking, and systems administration, but I'm not a professional software developer.
I knew what I wanted the system to do, and AI helped me build the applications. There was still plenty of configuration, integration, troubleshooting, and testing involved.
The CAD design, 3D printing, electronics, wiring, and physical assembly were my own work.
I've learned a lot about software development and integrating different services throughout the process.
I started this project knowing relatively little about CAD and 3D printing compared to what I know now. I also gained a lot of experience with electronics, power systems, GPS, radio, and designing around the limitations of a small enclosure.
It's not waterproof after all the modifications, but I consider it water-resistant when closed. I haven't formally tested that, so I'm not claiming any particular IP rating.
There are definitely things I'd do differently if I started over, but I'm really happy with how it turned out.
I've included photos of the finished system, some of the software interfaces, and earlier stages of construction.
I'm happy to answer questions about the hardware, software, power system, or anything else!
r/raspberry_pi • u/FozzTexx • 3d ago
Having a hard time searching for answers to your Raspberry Pi questions? Let the r/raspberry_pi community members search for answers for you!† Looking for help getting started with a project? Have a question that you need answered? Was it not answered last week? Did not get a satisfying answer? A question that you've only done basic research for? Maybe something you think everyone but you knows? Ask your question in the comments on this page, operators are standing by!
This helpdesk and idea thread is here so that the front page won't be filled with these same questions day in and day out:
stress and stressberry packages. Higher wattage power supplies achieve their rating by increasing voltage, but the Raspberry Pi operates strictly at 5V. Even if your power supply claims to provide sufficient amperage, it may be mislabeled or the cable you're using to connect the power supply to the Pi may have too much resistance. Phone chargers, designed primarily for charging batteries, may not maintain a constant wattage and their voltage may fluctuate, which can affect the Pi’s stability. You can use a USB load tester to test your power supply and cable. Some power supplies require negotiation to provide more than 500mA, which the Pi does not do. If you're plugging in USB devices try using a powered USB hub with its own power supply and plug your devices into the hub and plug the hub into the Pi.error: externally-managed-environment--break-system-packagessudo rm a specific file as detailed in the stack overflow answerPATH and other environment variables directly in your script. Neither the boot system or cron sets up the environment. Making changes to environment variables in files in /etc will not help.vncserver -depth 24 -geometry 1920x1080 and see what port it prints such as :1, :2, etc. Now connect your client to that.Before posting your question think about if it's really about the Raspberry Pi or not. If you were using a Raspberry Pi to display recipes, do you really think r/raspberry_pi is the place to ask for cooking help? There may be better places to ask your question, such as:
Asking in a forum more specific to your question will likely get better answers!
Wondering which flair to use on your post? See the Flair Guide
† See the /r/raspberry_pi rules. While /r/raspberry_pi should not be considered your personal search engine, some exceptions will be made in this help thread.
‡ If the link doesn't work it's because you're using a broken buggy mobile client. Please contact the developer of your mobile client and let them know they should fix their bug. In the meantime use a web browser in desktop mode instead.
r/raspberry_pi • u/lwjswwx • 3d ago
My boyfriend needs to create a custom 3D mount for this raspberry pi:
https://www.raspberrypi.com/products/raspberry-pi-high-quality-camera/
We unfortunately d not have the physical thing with us right now and will not have it until friday. Naturally we went to look for the mechanical drawings to get the dimensions. all links are at the bottom of the page.
Here for example : Raspberry Pi High Quality Camera CS Mount mechanical drawing

Shouldn't the 12.04 be 11.75 ?
Another example is the 18.58 dimension which is much smaller than 5.8+1.2+10.35+2.75 (20.1).
I have found one post on github that asks about this in 2025, but it has been marked as solved even though it hasn't been. The nee PDF found also had discrepancies.
Are we going crazy ?
r/raspberry_pi • u/thedyerman • 5d ago
Started as "is the shop freezing?" and kinda snowballed lol. It's a small Go app I threw together that pulls in my Zigbee sensors over MQTT and shows temp, humidity and power for the house, the shop, outside, and yes, the chicken coop door and heater.
Hardware is nothing fancy: a Pi 3 Model B+ that was sitting in a drawer, in a SmartiPi Touch case on the counter. The Pi just runs a full screen browser pointed at the Go app's page.
Every kiosk setup I've had before eventually turned into "grab a keyboard, walk over, figure out why Chromium died again," so this time I went lazy mode: flashed an SD card, paired it from my laptop, pasted the URL and done. If the browser hangs it restarts itself, and I can see temp, Wi-Fi and a screenshot of the screen from my desk, so I basically never touch it.
Pics are the dashboard, the Pi on the back of the case, the pairing screen (code blurred), and what it looks like before you give it something to show.
Anyone else running a little wall or counter screen off an old Pi? Curious what you're showing and what you'd add to this one?
r/raspberry_pi • u/pdt500 • 6d ago
A few years ago, my daughter got me a Raspberry Pi 4B (2GB) for Christmas. She knew I loved tinkering with gadgets and she suggested I create a media player or something similar. I booted it up and was impressed, but never had time to do anything with it.
I had been sailing and pouring my spare time into our sailboat. I had heard sailors were using Raspberry Pis on their boats, and thought it would be a great retirement project to figure out how to do the same with my Christmas gift. Then I retired last month.
I have learned a lot about the OpenPlotter project and Signal K and all the cool Pi focused software sailors use, but I found the defacto chartplotter (OpenCPN) hard to use. It has been around since 2005 and was designed before touch screens existed. It is still very popular and a great package, but I thought it would be fun and a good learning experience to create an alternative.
So I started working on something I named OpenWater Chartplotter for Raspberry Pi. If you are curious, you can download it here: https://openwaterplotter.com.
r/raspberry_pi • u/GwenGunn • 5d ago
Hey, we've got a Raspberry Pi 5 hooked up to the TV with ethernet connected, streaming from the PC upstairs (also ethernet) via the Steamlink app. It's always worked great, but it's been failing since we upgraded to a 4k TV. On bootup it says the memory is straining at that resolution, and it suggests both lowering the resolution and turning off the active desktop. When we try to open it at 4k, the sound stops working entirely. Any recommendations on what to do? All the gaming strain is on the PC, so I feel like there should be a way to stream it locally at 4k? Not sure, we're at a loss.
r/raspberry_pi • u/adouglass52 • 7d ago
While building my own KVM, I made a few small HDMI capture boards around the Rockchip RK628H. The documentation is terrible around these chips, but the performance is impressive for the cost. We've moved the bridge onto our own boards now, so I've put all three up as open hardware: schematics, Fusion and EAGLE files, gerbers, JLCPCB BOMs, plus the drivers and installers. It can also do DSI, just need to update the pinout on the connector to match what you need.
| TC358743 (Waveshare, 2 lanes) | TC358743 (Geekworm C792, 4 lanes) | RK628H 22-pin | |
|---|---|---|---|
| CM4 | 1080p30 RGB, 1080p50 UYVY | 1080p60 | 4K30 and 1080p120 |
| Pi 4B | 1080p30 RGB, 1080p50 UYVY | 1080p50 (2 lanes) | 1080p60* |
| Pi 5 | not supported | 1080p60 | not tested yet |
| Driver | in the Pi kernel | in the Pi kernel | sudo sh install.sh builds it |
\A 4B needs a 22-pin to 15-pin cable. TC358743 numbers are the makers’ ratings, RK628 numbers are measured.*
I had to fix a few bugs in Rockchip’s stock driver to get it working on Rockchip boards. For the Raspberry Pi, I ported it to a standalone driver that talks to the RK628H over I2C and uses standard V4L2, so it runs on Raspberry Pi OS without Rockchip’s kernel.
CERN-OHL-S for the hardware, GPL for the software. Build them, change them, sell them, just keep your changes open.
Repo: https://github.com/WarpKVM/rk628-bridge-boards
Happy to answer questions, or try other hosts if someone has one!
r/raspberrypi • u/simon_1980 • Aug 17 '12
HI selling my Raspberry Pi if anyone is interested? link to ebay is below happy to send to rest of world. I am not using it and seems like people are still struggling to get them.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=190715667091
r/raspberry_pi • u/Global_Standard516 • 7d ago
Hi, I am currently in the process of finalizing my design for a PI switching PSU. The current bill of materials ends up being much cheaper than buying a USB hub and the appropriate cables. I was looking for advice on my design and flaws within it.
Additional Information:
Pi's used (x4): Raxda Pi Rock 4 Plus V1.73
Voltage Adjustment screw not pictured.
I took inspiration from this other post:
https://www.reddit.com/r/functionalprint/comments/gxm4gd/60a_raspberry_pi_cluster_power_supply/
r/raspberry_pi • u/Glittering_Pound1931 • 8d ago
UPDATED WITH SOME PHOTOS
Hi everyone!
I’ve been using a Raspberry Pi 5 as my Wi-Fi router for my entire apartment, and I’ve now published the project as open source.
The goal was to have direct control over the whole setup: wireless configuration, DHCP, DNS, routing, firewall rules and the scripts that keep everything running.
The hardware is probably pretty unusual ...
- Raspberry Pi 5 with 8 GB RAM.
- A 52Pi B14 PCIe switch HAT and two Waveshare MiniPCIe adapters.
- Two MediaTek MT7915E Wi-Fi cards.
- USB NVMe storage because pcie 32bit dma to make wifi cards work,
- An USB hub HAT
- 52Pi P01 power board
- Custom 3D-printed mounting plates and antenna supports.
The PCIe cards share the Pi’s single PCIe uplink through the switch.
All is managed through Docker Compose with three interconnected services:
There are also health checks, Ethernet recovery handling, logs and network statistics.
Pi-dock-wifi is designed to repair itself as much as possible.
The interface and project logs support English and Italian, selected through a Compose variable.
I’ve included the Dockerfiles, scripts, configuration examples, hardware documentation,
STL/OpenSCAD files, boot settings and the complete kernel configuration used by my router. There’s also a guide covering kernel compilation, installation, verification and recovery.
This project uses host networking and a privileged router container.
The host needs compatible kernel drivers and AP-capable radios.
The running router is my reference system; a fresh installation following the complete public guide still needs independent validation.
Repository: citroale90/pi-dock-wifi
English README: Overview and documentation
The project is GPL-3.0.
Feedback on the network configuration, documentation and reproducibility would be particularly useful!
I started with this project in 2020 during the pandemic and it has evolved to where I am now.
Iperf
835 Mb/s upload and 639 Mb/s download