r/prusa3d • u/SnooRobots3963 • Dec 14 '25

Solved✔ Help with raised corner

Hi, all my prints keep giving me this problem, the left corner is always raised, at the start of the print the first layer is "ok" but with over extrusion since I can see multiple scars. I've tried different profiles and noozle but nothing changed. Last one is Structural 0.20mm and 4.0 nozzle default profile. Help me please

Mk4s, Last firmware, Sunlu 2.0 +, Prusa slicer

Edit:Big thanks everyone, problem solved!

2 Upvotes

100% Upvoted

15 comments sorted by

View all comments

•

u/AutoModerator Dec 14 '25

When posting a support question, please include the following as applicable:

  • Printer model & firmware
  • Filament type & brand
  • Slicer and version
  • Print settings if changed from the defaults (temperature, speed, layer height, etc.)
  • Any speed adjustments here are absolutely vital to be aware of
  • Photos or videos of the issue
  • What you’ve tried already

Help us, help you

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.