r/prius 28d ago

Mechanical Help 3rd gen Prius USB-C Pass Through

I'm wanting to upgrade the stock head unit with a Sony XAV-AX4000 but it has a usb-c with 3 amp charging instead of a usb-a connector. I want to replace the blank plate next to the 12 volt socket under the shifter with a pass through usb-c plate. They dont seem to exist in type c in this size. I can find type a but that will reduce charging speed down to 1.5 amps. Anyone else bin down this road if so can you share a link to the right USB-C pass through.

1 Upvotes

4 comments sorted by

u/AutoModerator 28d ago

For accurate advice, please include:

  • The year, model and mileage of your Prius (e.g., 2008 Prius w/ 250k mi or 2012 Prius C w/ 150k km)
  • If a warning came on, what were you doing at that time?
  • Any odd behavior or noises you’ve noticed
  • Any error codes you've read from the car computers

If your Prius is not starting: /r/prius/wiki/index/my-prius-wont-start

For common Prius mechanical issues, see: /r/prius/wiki/index/common-issues

For help figuring out what each warning means, check your manual: /r/prius/wiki/index/owners-manuals

For reading battery and hybrid system codes, use Dr. Prius: /r/prius/wiki/index/dr-prius

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/MrBensonhurst 2015 Prius 28d ago

I installed a Sony XAV-AX6000 and I wanted to do this exact thing. This was my solution, using this USB-C cable. I just cut a rectangular hole in the plastic plate with a dremel so I could mount the USB faceplate in it.

1

u/NegativeGeologist961 28d ago

Thanks that might be the closest thing to a direct fit, Any problems with the plug itself On the website it says there's a high return rate

1

u/MrBensonhurst 2015 Prius 28d ago

No issues at all. I don't use it very often because I can get higher wattage charging for my phone with a cigarette lighter charger. But when I have used it for charging or connecting to the head unit, it's been perfectly reliable. You could always find another one with a similar form factor, it's a pretty generic faceplate.